Hussmann M3X-EP Bedienungsanleitung

Night Curtain for Excel

Medium Temperature

Multi-deck Cases

with Standard Canopy

PARTS LIST (per curtain)

Item Quantity Description

1. 2Night Curtain Bracket

(Factory Installed)

2. 1Night Curtain

3. 1Wrench

4. 1Spindle Lock

5. 1Handle Hook

6. 2Screw (#6 x 3/8)

P/N 0466017A

April 2006

U.S. & CANADA 1-800-922-1919 • MEXICO 1-800-522-1900 • WWW.HUSSMANN.COM

IIlllluussttrraattiioonnddeeppiiccttssaannMM33XX--1122EEPP

wwiitthhtthhrreeeeNNiigghhttCCuurrttaaiinnssiinnssttaalllleedd..

Notes: Night curtains are intended to

reduce energy use outside normal

business hours.

Carefully unpack and inspect the

night curtain and components

to ensure there is no breakage or

damage, and there are no missing

parts.

Be sure cases have been positioned

and leveled according to installation

instructions. Install night curtains

after all cases are joined, and splash-

guards and bumpers are installed.

1Remove the left fascia panel

first, then remove the fascia

panel to the right of the first

panel. Continue until all fascia

panels are removed.

2Remove the bottom canopy

extrusion:

A. Rotate the bottom edge of

extrusion to unsnap it from the

supports.

B. Lift extrusion up to remove.

P/N 0466017A

2HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.

Note: Night Curtain Brackets

(parts list Item 1) are factory-

installed

3Locate the rectangular pin of

the spring on the right end of

the Night Curtain (parts list

Item 2). Use the supplied

Wrench (parts list Item 3)

to wind the spring clockwise

until it has sufficient tension

(approximately 12 turns).

Do not remove wrench!

Excel Multi-Deck Night Curtain

Installation Instruction

P/N 0466017A

Wrench

HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. • WWW.HUSSMANN.COM

Use caution when working

with spring under tension.

Sudden release of tension

may cause injury.

WARNING

Begin at the right-hand end of the lineup or case.

4Place the rectangular pin of the

night curtain into the cross

shaped opening of the right-

hand bracket. Once the pin is in

this bracket, the wrench should

be removed.

5Put the Spindle Lock (parts list

Item 4) on the round spindle of

the night curtain. The spindle is

on the left end of the night

curtain. Put the spindle lock

in place by sliding it into the

keyhole slot of the left bracket

and turning the spindle lock

90 degrees as shown in the

illustration.

Test tension of spring and adjust

if needed before moving to next

step. (Remove spindle lock,

replace wrench, and remove

night curtain from case. Return

to Step 3.)

Spring tension cannot be adjust-

ed without removing the curtain

from the case.

P/N 0466017A

4HUSSMANN CORPORATION, Bridgeton, MO 63044-2483 U.S.A.

Night Curtain

Bracket

Spindle

Lock

Locked

Position

Night Curtain

Bracket

Rectangular

Wrench

6Mount the Handle Hook (parts

list Item 5) below the front

bumper. Pull the night curtain

down and put the hook on the

handle to position the hook.

Mark the mounting hole

locations and drill pilot holes

for the Mounting Screws (parts

list Item 6). Mount the Handle

Hook with the Mounting

Screws.

7Reinstall the bottom canopy

extrusion and the fascia panels

removed in Steps 1 and 2.

Once the Night Curtain installation is

complete, spring tension cannot be

adjusted without removing the curtain

from the case.

Excel Multi-Deck Night Curtain

Installation Instruction

P/N 0466017A

Night

Curtain

Handle

Hook

Mounting

Screw

HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. • WWW.HUSSMANN.COM

Inhaltsverzeichnis

Andere Hussmann Kaufmann Handbücher

Hussmann

Hussmann GC Bedienungsanleitung

Hussmann

Hussmann IMPACT M2GE Bedienungsanleitung

Hussmann

Hussmann SPECIALTY TY3-3X4.5E-R Bedienungsanleitung

Hussmann

Hussmann IMPACT Elite E5 Bedienungsanleitung

Hussmann

Hussmann M3NX-GEP Bedienungsanleitung

Hussmann

Hussmann impact Excel C2X-XLEP Bedienungsanleitung

Hussmann

Hussmann HSD/SC-190Y Bedienungsanleitung

Hussmann

Hussmann FNGSC-A Bedienungsanleitung

Hussmann

Hussmann NRCV Bedienungsanleitung

Hussmann

Hussmann SGB Betriebsanleitung

Hussmann

Hussmann RGD Bedienungsanleitung

Hussmann

Hussmann Impact Excel M5X-GE Bedienungsanleitung

Hussmann

Hussmann SCSS Bedienungsanleitung

Hussmann

Hussmann M5NX-EP Bedienungsanleitung

Hussmann

Hussmann IMPACT RL Bedienungsanleitung

Hussmann

Hussmann impact Excel C2X-XLGE Bedienungsanleitung

Hussmann

Hussmann NVBA Bedienungsanleitung

Hussmann

Hussmann IMPACT LNGH Bedienungsanleitung

Hussmann

Hussmann IMPACT RL Bedienungsanleitung

Hussmann

Hussmann impact Excel C5X-E Bedienungsanleitung

Hussmann

Hussmann LN Bedienungsanleitung

Hussmann

Hussmann W6RRI Bedienungsanleitung

Hussmann

Hussmann SHM-4 Kurzanleitung

Hussmann

Hussmann IMPACT IEDG1 Bedienungsanleitung

Beliebte Kaufmann Handbücher anderer Marken

FRIGOGLASS

FRIGOGLASS Flex 20 HC Bedienungsanleitung

EPTA

EPTA COSTAN RHINO MULTI Bedienungsanleitung

CASCO

CASCO Nano Cube Bedienungsanleitung

True

True GDIM-26 Bedienungsanleitung

Structural Concepts

Structural Concepts Oasis Mobile Series Montageanleitung

Haussmann

Haussmann RL Bedienungsanleitung

Howard McCray

Howard McCray R-CDS32E-4 Bedienungsanleitung

EPTA

EPTA iarp Cool Emotions Delight Lite Bedienungsanleitung

VALERA

VALERA BC 85 Bedienungsanleitung

HL Display

HL Display 3eBin Bedienungsanleitung

Dixie Narco

Dixie Narco DNCB 501E Bedienungsanleitung

APW Wyott

APW Wyott Racer DMXD-30H Bedienungsanleitung

Hoshizaki

Hoshizaki KD-90C Bedienungsanleitung

Summit

Summit SCR1006 Bedienungsanleitung

Delfield

Delfield Shelleyspeed SPM-28E Bedienungsanleitung

EPTA

EPTA iarp Cool Emotions GLEE 40 Bedienungsanleitung

Kysor/Warren

Kysor/Warren GranBering KW Leitfaden

Crane

Crane BevMAX Refresh 6 Media Bedienungsanleitung