Hussmann SHM Series Bedienungsanleitung

SHM

Medium Temperature Self Contained

Specialty Horizontal Merchandiser

Installation &

Operation

Manual

P/N 0515258_N

June 2018

IMPORTANT

Keep in store

for future reference!

Spanish 0531303

French 0531304

MANUAL- I/O SELF-CONTAINED SHM

Shown with 3-sided Bumper

P/N 0515258_N U.S. & Canada 1-800-922-1919 • Mexico 01 800-890-2900 • www.hussmann.com

IMPORTANT

KEEP IN STORE FOR FUTURE REFERENCE

Quality that sets industry standards!

12999 St. Charles Rock Road • Bridgeton, MO 63044-2483

U.S. & Canada 1-800-922-1919 • Mexico 01 800-890-2900

www.hussmann.com

P/N 0515258_N iii

HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. SHM Merchandisers

ANSI Z535.5 DEFINITIONS .......... vi

INSTALLATION

Certification ........................ 1-1

Hussmann Product Control ........... 1-1

Shipping Damage ................... 1-1

Location ........................... 1-1

Self Contained Location .............. 1-2

Model Description .................. 1-3

Unloading ......................... 1-3

Exterior Loading .................... 1-3

Shipping Skid ...................... 1-3

Merchandiser Leveling ............... 1-4

Optional Legs ...................... 1-4

Serial Plate Location ................. 1-4

Refrigeration Unit Access ............. 1-4

Sealing Merchandiser to Floor ......... 1-4

Optional Night Curtain ............... 1-5

Self-Contained Refrigeration Equipment

Start Up Check List ................. 1-7

ELECTRICAL / REFRIGERATION

Merchandiser Electrical Data .......... 2-1

Field Wiring ........................ 2-1

Electrical Connections . . . . . . . . . . . . . . . . 2-1

Electrical Outlet ..................... 2-1

Refrigeration (Self Contained) ......... 2-1

Waste Outlet and Water Seal .......... 2-2

START UP / OPERATION

Controller Operation ................. 3-1

Key Function ....................... 3-2

Further Information ................. 3-3

Connections ........................ 3-4

LED .............................. 3-5

KDE PLUS Buttons ................. 3-6

Setpoint ........................... 3-7

Sensor to Control Configuration........ 3-8

Controls Adjustments ................ 3-9

Start Up .......................... 3-10

Load Limits ....................... 3-10

Stocking .......................... 3-10

Thermometer ...................... 3-10

MAINTENANCE

Care and Cleaning ................... 4-1

Cleaning Discharge Honeycomb ....... 4-2

Cleaning Stainless Steel Surfaces ....... 4-2

Cleaning Under Step Pan ............. 4-2

Cleaning Thermometer ............... 4-3

Cleaning Coils ...................... 4-3

Cleaning Evaporation Pan ............ 4-4

Removing Scratches from Bumper ...... 4-4

Maintaining Fluorescent Lamps ........ 4-4

SERVICE

Replacing Fan Motors and Blades ...... 5-1

Replacing Lights .................... 5-2

Replacing Ballast / Power Supply ....... 5-2

APPENDIX

Part Numbers ..................... A-1

Plan View & Dimensions ............. A-4

Cross Section View & Data .......... A-5

Electrical Data & Product Data ....... A-6

Electrical Cont. & Shipping Weight .... A-7

SHM Self Contained Case Wiring ..... A-8

WARRANTY

TABLE OF CONTENTS

P/N 0515258_N U.S. & Canada 1-800-922-1919 • Mexico 01 800-890-2900 • www.hussmann.com

REVISION HISTORY

REVISION N — Page 3-8 removed sensor wire color

REVISION M

1. Page 1-4 - Replaced image of the display & cable

-Replaced display picture

2. Page 3-1 to 3-5-Remove Safe-NET Controller

Information

3. Page 3-6 -Replaced pictures with coil to ctrl

4. Page 3-7-Change Defrost Frequency from 2 to 3

-Change Temp Termination from 52 to 48

-Change Controller info on first paragraph to controller

-Remove word knob

5. Page 3-8 -Changed controller information

6. Page A-1-Removed selected components -Add

Controller parts

7. Page A-3 -Replaced SNIII with “Ctrl Display” on

291431 & 291432 descriptions

8. Page A-5 -Remove selected information; On Defrost

Data Change Frequency from 12 to 8 and Defrost

Termination from 52 to 48

9. Page A-8/A-9-Replaced diagrams with new revisions

REVISION L

Removed; For USA/CANADA, a Hi-Humidity

Condensate Pan Kit is provided with SHM-3;

Revised Part Numbers, Page A-1 and Condensate

Pan numbers on, Page A-2. Change fuse Amps 30

15, Page A-7; new wiring diagram, Page A-8

REVISION K

NEMA Plug, 2-1; Condensate Pan Note, 2-2; New Part,

A-2; Updated tables, A-5; Updated tables, A-6; Updated

table A-7; Updated Wiring Diagrams, A-8

REVISION J

Revised Parts List, A-2; Revised Wiring Diagram, A-8

A-9; Shipping Weight, Page A-7

REVISION H

Revised Refrigeration Charge, A-5

REVISION G — Note on cover page. Removed model

SHM-4BW, Page 1-2, Added California Prop 65 Warning,

Page 1-2 Updated Night Curtain Instructions, Page 1-5

Added New Parts List, Page A-1

REVISION F — Added Checklists Page 1-7; Added

Warning Page 1-3; Cleaning Coils 4-3; Maintaining

Fluorescent Lights 4-4. Checklist Page 4-5

REVISION E— JULY 2013

1. Included Night Curtain Installation Instructions

Page 1-5 and 1-6

REVISION D— FEBRUARY 2012

1. Changed NEMA plug

2. Removed Remote Case setup instructions

REVISION C— JANUARY 2012

1. Added LED Light Bars

2. Removed Remote Models

3. New Wiring Diagram SHM-3, SHM-4

REVISION B — DECEMBER 2010

1. Revised defrost settings, Page 3-3

2. Changed Defrost Frequency (2); Page 3-7

3. Revised defrost settings; Page A-3

ORIGINAL ISSUE — NOVEMBER 2010

* * * * * * * * * * * * * * * * * * * * * * * * * *

ANSI Z535.5 DEFINITIONS

• DANGER – Indicate[s] a hazardous

situation which, if not avoided, will

result in death or serious injury.

• WARNING –Indicate[s] a hazardous

situation which, if not avoided, could

result in death or serious injury.

• CAUTION –Indicate[s] a hazardous

situation which, if not avoided, could

result in minor or moderate injury.

• NOTICE – Not related to personal injury –

Indicates[s] situations, which if not avoided,

could result in damage to equipment.

P/N 0515258_N 1-1

HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. SHM Merchandisers

UL LISTING

These merchandisers are manufactured to meet

ANSI/ UL 471 standard requirements for safe-

ty. Proper installation is required to maintain

the listing.

FEDERAL / STATE REGULATION

These merchandisers at the time they are man-

ufactured, meet all federal and state/ provincial

regulations. Proper installation is required to

ensure these standards are maintained. Near

the serial plate, each merchandiser carries a

label identifying the environment for which the

merchandiser was designed for use. A Type II

fan speed control kit is required for each mer-

chandiser to operate at Type II conditions.

ANSI/NSF-7 Type I – Display Refrigerator /

Freezer

Intended for 75°F (24°C) / 55%RH Ambient Application

ANSI/NSF-7 Type II – Display Refrigerator / Freezer

Intended for 80°F / 55%RH Ambient Application

ANSI/NSF-7 – Display Refrigerator

Intended for Bulk Produce

HUSSMANN PRODUCT CONTROL

The serial number and shipping date of all

equipment is recorded in Hussmann’s files

for warranty and replacement part purposes.

All correspondence pertaining to warranty or

parts ordering must include the serial number

of each piece of equipment involved. This is to

ensure the customer is provided with the cor-

rect parts.

SHIPPING DAMAGE

All equipment should be thoroughly examined

for shipping damage before and during

unloading. This equipment has been carefully

inspected at our factory. Any claim for loss

or damage must be made to the carrier. The

carrier will provide any necessary inspection

reports and/or claim forms.

Apparent Loss or Damage

If there is an obvious loss or damage, it must

be noted on the freight bill or express receipt

and signed by the carrier’s agent; otherwise,

carrier may refuse claim.

Concealed Loss or Damage

When loss or damage is not apparent until

after equipment is uncrated, retain all packing

materials and submit a written response to the

carrier for inspection within 15 days.

LOCATION

These merchandisers are designed for

displaying products in air conditioned stores

where temperature is maintained at or below

the ANSI / NSF-7 specified level and relative

humidity is maintained at or below 55%.

Placing refrigerated merchandisers in direct

sunlight, near hot tables or near other heat

sources could impair their efficiency. Like

other merchandisers, these merchandisers are

sensitive to air disturbances. Air currents

passing around merchandisers will seriously

impair their operation. Do NOT allow air

conditioning, electric fans, open doors or

windows, etc. to create air currents around the

merchandiser.

INSTALLATION

Recommended operating ambient

temperature is between

65°F (18°C) to 75°F (23.9°C).

Maximum relative humidity is 55%.

1-2 INSTALLATION

P/N 0515258_N U.S. & Canada 1-800-922-1919 • Mexico 01 800-890-2900 • www.hussmann.com

SELF CONTAINED LOCATION

Product should always be maintained at prop-

er temperature. This means that from the

time the product is received, through storage,

preparation and display, the temperature of the

product must be controlled to maximize the

life of the product.

Besure to position self contained

merchandisers properly.

SELF CONTAINED models have vented base

panels to allow air circulation through the

condensing unit.

See illustrations for clearances distances from

walls, merchandisers, and any other large

objects near the merchandiser’s vented base

panels. Blocking or restricting air flow will

adversely affect performance and may damage

the refrigeration system.

This product may contain chemicals known

to the State of California to cause cancer,

birth defects, or other reproductive harm.

This warning is the result of the California State

law known as the California Safe Drinking Water

and Toxic Enforcement Act of 1986, which is

commonly referred to as “Proposition 65.”

This warning does not mean that Hussmann

products will cause cancer or reproductive

harm, or is in violation of any product-safety

standards or requirements. As claried by the

California State government, Proposition 65

can be considered more of a ‘right to know’ law

than a pure product safety law. When used as

designed, Hussmann believes that our products

are not harmful. We provide the Proposition 65

warning to stay in compliance with California

State law. It is your responsibility to provide

accurate Proposition 65 warning labels to your

customers when necessary. For more information

on Proposition 65, please visit the California

State government website.

For California Businesses:

P/N 0515258_N 1-3

HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. SHM Merchandisers

MODEL DESCRIPTION

SHM merchandisers offer versatility for the

display of food items such as: fresh fruit,

vegetables, cheeses and other delicatessen

items. Carefully read and follow the instruc-

tions prior to operating the merchandiser.

UNLOADING

Unloading from Trailer:

Lever Bar (also known as a Mule, Johnson

Bar, J-bar, Lever Dolly, or Pry Lever)

Move the merchandiser as close as possible to

its permanent location and remove all packaging.

Check for damage before discarding packaging.

Remove all separately packed accessories such

as kits and shelves.

Improper handling may cause damage to the

merchandiser when unloading. To avoid dam-

age:

1. Do not drag the merchandiser out of the

trailer. Use a Johnson bar (mule).

2. Use a forklift or dolly to remove the

merchandiser from the trailer.

EXTERIOR LOADING

Do NOT walk on top of merchandisers or

damage to the merchandisers and serious

personal injury could occur.

merchandisers are not structurally

designed to support excessive external

loading such as the weight of a person. Do

not place heavy objects on the merchandiser.

SHIPPING SKID

Each merchandiser is shipped on a skid to

protect the merchandiser’s base, and to make

positioning the case easier.

Do not remove the shipping skid until the

merchandiser is near its final location. The

skid provides protection for both the merchan-

diser and the floor.

Remove the skid by raising one end of the

merchandiser approximately 6 inches. Block the

merchandiser securely, and remove the two skid

bolts from the raised end. Replace the bolts

with (provided) leg levelers. Repeat this proce-

dure at opposing end. Once the leg levelers are

secured in place, the merchandiser may be slid

off the skid and placed in its final location.

DO NOT TILT MERCHANDISER ON ITS

SIDE OR END WHEN REMOVING SKID.

Once the skid is removed, the merchandiser

must be lifted —NOT PUSHED— to reposition.

Check floor where merchandisers are to be set

to see if it is a level area. Determine the highest

part of the floor.

Do NOT remove shipping crate until the

merchandiser is positioned

for installation.

Do NOT stand or walk on top of

merchandiser. Do not store items or

ammable materials atop the unit.

1-4 INSTALLATION

P/N 0515258_N U.S. & Canada 1-800-922-1919 • Mexico 01 800-890-2900 • www.hussmann.com

MERCHANDISER LEVELING

Besure to position merchandisers proper-

ly. Level the merchandiser by all four corners.

Merchandiser(s) must be installed level to

ensure proper operation of the refrigeration

system, and to ensure proper drainage of

defrost water. Optional leg levelers can be

provided for this purpose.

OPTIONAL LEGS

NSF® approved legs replace the leg levelers if

required by local health codes. The legs raise

the case 6 inches for cleaning purposes. An

optional skirt kit can be provided to snap on

the legs.

SERIAL PLATE LOCATION

The serial plate is located on the interior left

wall of the merchandiser. It contains all perti-

nent information such as model, serial number,

amperage rating, refrigerant type and charge.

This information will be needed to install, service

or order parts for the merchandiser.

REFRIGERATION UNIT ACCESS

The lower access panel may be removed by

lifting the panel straight upward and over the

screws on which it is hanging. The panel is

installed by reversing the above procedure.

Ensure lower access panel is flat against the

floor when installed to prevent air circulation

problems on self contained merchandisers.

Display is mounted on left

side of access panel. Be

careful not to detach cable

from display when removing

access panel.

SEALING MERCHANDISER TO FLOOR

If required by local sanitary codes, or if the

customer desires, merchandisers may be sealed

to the floor using a vinyl cove base trim. The

size needed will depend on how much varia-

tion there is in the floor, from one end of the

merchandiser to the other. Sealing of the lower

front and rear panels on self contained mod-

els may hamper their removal for servicing or

maintenance of the condensing unit.

NOTE: Do not allow trim to cover any intake

or discharge grilles located in the lower front

panel.

Serial Plate

Display

Lift up and

out to remove

access panel

P/N 0515258_N 1-5

HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A. SHM Merchandisers

(OPTIONAL) NIGHT CURTAIN

Night curtains are used to cover the case opening

after normal business hours. The curtains

improve energy consumption, allowing the

refrigeration system to work less. Night

curtains ordered with the case are factory

installed.

PARTS LIST (per curtain)

Item Quantity Description

1. 1 Night Curtain

2. 3 Screw Phil Pan (#8)

3. 1 Clip bottom

1. Put night curtain on top panel,

one end of the will use to curtain

to fasten screw. Take a distance

1.50 inches to edge part end night

curtain. And center night curtain

to length case.

2. Use 3 Screw, Phil Pan, #8 X ½”

1.50 14.50 14.50

3.00

1-6 INSTALLATION

P/N 0515258_N U.S. & Canada 1-800-922-1919 • Mexico 01 800-890-2900 • www.hussmann.com

3. Put clip in bottom, take to

reference access panel 2.00 inches

DETAIL A

2.00

3. Put clip in bottom, take to reference access

panel 2.00 inches

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Hussmann Kaufmann Handbücher

Hussmann

Hussmann SMG8B Bedienungsanleitung

Hussmann

Hussmann Elite Series Bedienungsanleitung

Hussmann

Hussmann DSIO3-Y Betriebsanleitung

Hussmann

Hussmann ESGMS Bedienungsanleitung

Hussmann

Hussmann VR3-M Series Bedienungsanleitung

Hussmann

Hussmann P2XRO-E Bedienungsanleitung

Hussmann

Hussmann Impact Excel M3X-GE Bedienungsanleitung

Hussmann

Hussmann M3NX-GEP Bedienungsanleitung

Hussmann

Hussmann Impact C6E Bedienungsanleitung

Hussmann

Hussmann D6LEP Bedienungsanleitung

Hussmann

Hussmann PHRO Bedienungsanleitung

Hussmann

Hussmann ISLA Series Betriebsanleitung

Hussmann

Hussmann NAV Series Bedienungsanleitung

Hussmann

Hussmann Impact Excel M5X-GE Bedienungsanleitung

Hussmann

Hussmann IMPACT Excel C2NX-LE Bedienungsanleitung

Hussmann

Hussmann VGK Bedienungsanleitung

Hussmann

Hussmann DVG-8 Kurzanleitung

Hussmann

Hussmann Excel FWG Bedienungsanleitung

Hussmann

Hussmann SHVSV Series Bedienungsanleitung

Hussmann

Hussmann Impact P1 Bedienungsanleitung

Hussmann

Hussmann RMA Bedienungsanleitung

Hussmann

Hussmann Specialty Products CR3-D Bedienungsanleitung

Hussmann

Hussmann IMPACT M1CIMP-4B Bedienungsanleitung

Hussmann

Hussmann Specialty Products CR3HTO-HTB Bedienungsanleitung

Beliebte Kaufmann Handbücher anderer Marken

FRIGOGLASS

FRIGOGLASS Flex 20 HC Bedienungsanleitung

EPTA

EPTA COSTAN RHINO MULTI Bedienungsanleitung

CASCO

CASCO Nano Cube Bedienungsanleitung

True

True GDIM-26 Bedienungsanleitung

Structural Concepts

Structural Concepts Oasis Mobile Series Montageanleitung

Haussmann

Haussmann RL Bedienungsanleitung

Howard McCray

Howard McCray R-CDS32E-4 Bedienungsanleitung

EPTA

EPTA iarp Cool Emotions Delight Lite Bedienungsanleitung

VALERA

VALERA BC 85 Bedienungsanleitung

HL Display

HL Display 3eBin Bedienungsanleitung

Dixie Narco

Dixie Narco DNCB 501E Bedienungsanleitung

APW Wyott

APW Wyott Racer DMXD-30H Bedienungsanleitung

Hoshizaki

Hoshizaki KD-90C Bedienungsanleitung

Summit

Summit SCR1006 Bedienungsanleitung

Delfield

Delfield Shelleyspeed SPM-28E Bedienungsanleitung

EPTA

EPTA iarp Cool Emotions GLEE 40 Bedienungsanleitung

Kysor/Warren

Kysor/Warren GranBering KW Leitfaden

Crane

Crane BevMAX Refresh 6 Media Bedienungsanleitung