HYOSUNG Aquila 250 Bedienungsanleitung

SERVICE MANUAL

99000-95310

SERVICE MANUAL

HYOSUNG MOTORS & MACHINERY INC.

CHASSIS

ELECTRICAL SYSTEM

GROUP INDEX

GENERAL INFORMATION 1

PERIODIC MAINTENANCE 2

ENGINE 3

FUEL SYSTEM 4

SERVICING INFORMATION 7

This manual has been prepared on the basis of

the latest specification at the time of publica-

tion.

If modification has been made since then, dif-

ference may exist between the content of this

manual and the actual vehicle.

Illustrations in this manual are used to show the

basic principles of operation and work proce-

dures.

They may not represent the actual vehicle exactly

in detail.

This manual is intended for those who have

enough knowledge and skills for servicing

HYOSUNG vehicles. Without such knowledge and

skills, you should not attempt servicing by relying

on this manual only.

Instead, please contact your nearby authorized

HYOSUNG motorcycle dealer.

COPYRIGHT HYOSUNG MOTORS & MACHINERY INC. 2000.

HYOSUNG MOTORS & MACHINERY INC.

Overseas Technical Department

FOREWORD

This manual contains an introductory description on

HYOSUNG and procedures for its inspection

/service and overhaul of its main components.

Other information considered as generally known is

not included.

Read GENERAL INFORMATION section to familiarize

yourself with outline of the vehicle and MAINTE-

NANCE and other sections to use as a guide for

proper inspection and service.

This manual will help you know the vehicle better so

that you can assure your customers of your optimum

and quick service.

COPYRIGHTED

HOW TO USE THIS MANUAL

TO LOCATE WHAT YOU ARE

LOOKING FOR:

1. The text of this manual is divided into sections.

2. As the title of these sections are listed on the previous

page as GROUP INDEX, select the section where you are look-

ing for.

3. Holding the manual as shown at the right will allow you to find

the first page of the section easily.

4. On the first page of each section, its contents are listed. Find

the item and page you need.

COMPONENT PARTS

Example: Front wheel

COPYRIGHTED

SYMBOL

Listed in the table below are the symbols indicating instructions and other information necessary for servicing and

meaning associated with them respectively.

Apply THREAD LOCK1324.

Apply or use brake fluid.

Measure in voltage range.

Measure in resistance range.

Measure in current range.

Use special tool.

Torque control required.

Data beside it indicates specified torque.

Apply oil. Use engine oil unless otherwise

specified.

Apply SUPER GREASE

A

Apply SILICONE GREASE.

Apply MOLY PASTE.

Apply BOND1215.

DEFINITIONSYMBOL DEFINITIONSYMBOL

Apply SUPER GREASE

C

COPYRIGHTED

GENERAL INFORMATION

INFORMATION LABELS 1-1

GENERAL PRECAUTIONS 1-1

SERIAL NUMBER LOCATION 1-4

FUEL AND OIL RECOMMENDATIONS 1-5

BREAK-IN PROCEDURES 1-6

CYLINDER CLASSIFICATION 1-6

EXTERIOR ILLUSTRATION 1-7

SPECIFICATIONS 1-8

CONTENTS

COPYRIGHTED

1-1 GENERAL INFORMATION

Indicates a potential hazard that could result in vehicle damage.

NOTE:

Indicates special information to make maintenance easier or instructions cleaner.

Please note, however, that the warning and cautions contained in this manual cannot possibly cover all potential

hazards relating to the servicing, or lack of servicing, of the motorcycle. In addition to the WARNING and CAUTION

stated, you must use good judgement and basic mechanical safety principles. If you are unsure about how to perform a

particular service operation, ask a more experienced mechanic for advice.

GENERAL PRECAUTIONS

CAUTION

WARNING

WARNING / CAUTION / NOTE

Please read this manual and follow its instructions carefully. To emphasize special information, the symbol and

the words WARNING, CAUTION and NOTE have special meanings. Pay special attention to the messages

highlighted by these signal words.

Proper service and repair procedures are important for the safety of the service machanic and the safety

and reliability of the vehicle.

When 2 or more persons work together, pay attention to the safety of each other.

When it is necessary to run the engine indoors, make sure that exhaust gas is forced outdoors.

When working with toxic or flammable materials, make sure that the area you work in is well-ventilated

and that you follow all off the material manufacturers instructions.

Never use gasoline as a cleaning solvent.

To avoid getting burned, do not touch the engine, engine oil or exhaust system during or for a while

after engine operation.

After servicing fuel, oil, exhaust or brake systems, check all lines and fittings related to the system for

leaks.

WARNING

Indicates a potential hazard that could result in death or injury.

COPYRIGHTED

GENERAL INFORMATION 1-2

If parts replacement is necessary, replace the parts with HYOSUNG Genuine Parts or their equivalent.

When removing parts that are to be reused, keep them arranged in an orderly manner so that they may be

reinstalled in the proper order and orientation.

Be sure to use special tools when instructed.

Make sure that all parts used in reassembly are clean, and also lubricated when specified.

When use of a certain type of lubricant, bond, or sealant is specified, be sure to use the specified type.

When removing the battery, disconnect the negative cable first and then positive cable. When reconnect-

ing the battery, connect the positive cable first and then negative cable, and replace the terminal cover on the

positive terminal.

When performing service to electrical parts, if the service procedures do not require use of bat-

tery power, diconnect the negative cable at the battery.

Tighten cylinder head and case bolts and nuts, beginning with larger diameter and ending with smaller

diameter, from inside to outside diagonally, to the specified tightening torque.

Whenever you remove oil seals, gaskets, packing, O-rings, locking washers, cotter pins, circlips, and

certain other parts as specified, be sure to replace them with new ones. Also, before installing these new

parts, be sure to remove any left over material from the mating surfaces.

Never reuse a circlip. When installing a new circlip, take care not to expand the end gap larger than

required to slip the circlip over the shaft. After installing a circlip, always ensure that it is completely seat-

ed in its groove and securely fitted.

Do not use self-locking nuts a few times over.

Use a torque wrench to tighten fasteners to the torque values when specified. Wipe off grease or oil

if a thread is smeared with them.

After reassembly, check parts for tightness and operation.

To protect environment, do not unlawfully dispose of used motor oil and other fluids: batteries, and tires.

To protect Earths natural resouces, properly dispose of used vehicles and parts.

CAUTION

COPYRIGHTED

1-3 GENERAL INFORMATION

HYOSUNG

NOTE:

Difference between photographs and actual motorcycles depends on the markets.

COPYRIGHTED

GENERAL INFORMATION 1-4

SERIAL NUMBER LOCATION

The frame serial number or V.I.N. (Vehicle Identification Number) is stamped on the steering head tube. The engine seri-

al number is located on the left upside of crankcase assembly.

These numbers are required especially for registering the machine and ordering spare parts.

FRAME SERIAL NUMBER

ENGINE SERIAL NUMBER

COPYRIGHTED

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere HYOSUNG Motorrad Handbücher

HYOSUNG

HYOSUNG COMET GTR125 - CATALOGUE Bedienungsanleitung

HYOSUNG

HYOSUNG GF125 Bedienungsanleitung

HYOSUNG

HYOSUNG Comet 250 R Bedienungsanleitung

HYOSUNG

HYOSUNG GT 650 Bedienungsanleitung

HYOSUNG

HYOSUNG RX 125 - Bedienungsanleitung

HYOSUNG

HYOSUNG ST7 Bedienungsanleitung

HYOSUNG

HYOSUNG Aquila GV 650 Bedienungsanleitung

HYOSUNG

HYOSUNG RX 125 - Bedienungsanleitung

HYOSUNG

HYOSUNG GT650 EURO 3 - CATALOGUE Bedienungsanleitung

HYOSUNG

HYOSUNG GV 650 EFI Bedienungsanleitung

HYOSUNG

HYOSUNG GT650 - PARTS CATALOGUE Bedienungsanleitung

HYOSUNG

HYOSUNG GT 650 EFI Bedienungsanleitung

HYOSUNG

HYOSUNG Karion Bedienungsanleitung

HYOSUNG

HYOSUNG GT125 - PARTS CATALOGUE Bedienungsanleitung

HYOSUNG

HYOSUNG MS3 - CATALOGUE Bedienungsanleitung

HYOSUNG

HYOSUNG COMET 250/R FI Bedienungsanleitung

HYOSUNG

HYOSUNG GT650SR - PARTS CATALOGUE Bedienungsanleitung

HYOSUNG

HYOSUNG Aquila GV 650 Bedienungsanleitung

HYOSUNG

HYOSUNG Aquil GV650 Bedienungsanleitung

HYOSUNG

HYOSUNG GV250 Ei Bedienungsanleitung

HYOSUNG

HYOSUNG GT250 REi Bedienungsanleitung

HYOSUNG

HYOSUNG GV125S Bedienungsanleitung

HYOSUNG

HYOSUNG GT650 - PARTS CATALOGUE Bedienungsanleitung

HYOSUNG

HYOSUNG KARION RT125 Bedienungsanleitung

Beliebte Motorrad Handbücher anderer Marken

OHVALE

OHVALE GP-0 Stücklistenhandbuch

Yamaha

Yamaha Star XV19CTSZ 2009 Bedienungsanleitung

KTM

KTM 350 XCF-W USA Bedienungsanleitung

Husqvarna

Husqvarna FC 250 2016 Bedienungsanleitung

Ducati

Ducati SCRAMBLER 800 Gebrauchsanweisung

APRILIA

APRILIA ETV MILLE CAPONORD - PART1 02-2001 Bedienungsanleitung

Yamaha

Yamaha 2006 YZF-R1V Bedienungsanleitung

KTM

KTM Freeride E-XC 2021 Bedienungsanleitung

Fantic

Fantic Enduro 125 Bedienungsanleitung

Ducati

Ducati Supersport 750 desmodue Bedienungsanleitung

MV Agusta

MV Agusta 2008 F4 312RR 1078 Gebrauchsanweisung

Yamaha

Yamaha XVS650A Bedienungsanleitung

Yamaha

Yamaha YZF-R6T(C) Handbuch

Ducati

Ducati 748 monoposto strada Bedienungsanleitung

ATK

ATK 1988 250 Bedienungsanleitung

Excelsior-HENDERSON

Excelsior-HENDERSON 1999 HCX Bedienungsanleitung

Triumph

Triumph Thunderbird Bedienungsanleitung

Yamaha

Yamaha 2006 FJR1300A Bedienungsanleitung