IBASE Technology IB804 Bedienungsanleitung

IB804

Intel® Atom 945GSE

PC/104-Plus CPU Module

USER’S MANUAL

Version 1.0

IB804 User’s Manual

Acknowledgments

Award is a registered trademark of Award Software International,

Inc.

PS/2 is a trademark of International Business Machines

Corporation.

Intel® and Atom™ are registered trademarks of Intel Corporation.

Microsoft Windows is a registered trademark of Microsoft

Corporation.

Winbond is a registered trademark of Winbond Electronics

Corporation.

All other product names or trademarks are properties of their

respective owners.

IB804 User’s Manual iii

Table of Contents

Introduction ..............................................................1

Product Description.............................................................1

Checklist..............................................................................2

Specifications......................................................................3

Board Dimensions...............................................................4

Installations ..............................................................5

Installing the Memory (SODIMM).....................................6

Jumpers and Connector on IB804.......................................7

BIOS Setup .............................................................15

Drivers Installation.................................................37

Intel Chipset Software Installation Utility.........................38

VGA Drivers Installation ..................................................39

LAN Drivers Installation...................................................40

Appendix.................................................................45

A. I/O Port Address Map...................................................45

B. Interrupt Request Lines (IRQ)......................................46

C. Watchdog Timer Configuration....................................47

iv IB804 User’s Manual

This page is intentionally left blank.

INTRODUCTION

IB804 User’s Manual 1

Introduction

Product Description

The IB804 PCI-104+ SBC a small footprint single board computer that

is configured with the Intel Atom processor N270 at 1.6GHz, FSB533

and the Mobile Intel 945GSE Express Chipset with the ICH7M.

This PCI-104+ board provides greater flexibility for developers of

embedded computing solutions. It is ideally suited for rugged and

compact designs as in Internet devices and applications in automation,

industrial control, data acquisition, thin client and other embedded PC

applications.

IB804 features the Intel's Graphics Media Accelerator 950 core, making

it compatible with Windows Vista Premium, and support display

interfaces including VGA CRT and single channel 18-bit LVDS

displays. One DDR2 SO-DIMM on board implements up to 1GB of

system memory. One Gigabit LAN, with Intel 82574L controller, is also

available.

Advanced connectivity and expansion interfaces are provided by one

IDE, two RS-232 serial ports and four USB 2.0 high-speed ports.

Remarks: In installing the PC/104 Plus CPU board into a chassis, it is

recommended that the CPU board be placed on the topmost level of the

PC/104 board layers. The chassis environment should be designed in

such a way that there is good airflow to ventilate the system.

INTRODUCTION

2 IB804 User’s Manual

Checklist

Your IB804 package should include the items listed below. Damaged or

missing items should be reported to your supplier.

•The IB804 CPU Module

•This User’s Manual

•One Driver CD

•Optional cable kit (IDE, PS2, VGA, USB, COM, LAN)

INTRODUCTION

IB804 User’s Manual 3

Specifications

Form Factor PCI 104+ SBC

CPU Type Intel® Atom™ processor N270 (code name

Diamondville)

Speed / FSB CPU Clock speed = 1.60GHz

FSB=533MHz

L2 Cache=512K

Green /APM APM1.2

BIOS Award BIOS: supports ACPI Function

Chipset Intel® 945GSE Chipset

GMCH: QG82945GSE

ICH7M: NH82801GBM

Memory DDRII 533 SO-DIMM x 1 (w/o ECC function), supports

Single channel. Max. 1GB

VGA Intel® 945GSE built-in Graphics Media Accelerator 950

Graphics Core -----Supports CRT w/ DF13 connector &

18 bits single channels LVDS interface w/ DF13 socket

LAN Intel® 82574L Gigabit Ethernet Controller x 1

USB ICH7M built-in USB 2.0 host controller, support 4 ports

Audio N/A

IDE ICH7M built-in Ultra DMA 33/66/100, 44-pin box-header

x1 for IDE

LPC I/O Winbond® 83627EHG:

- COM1 (RS232), COM2 (RS232),

- Keyboard/mouse pin-header

- Hardware monitor (3 thermal inputs, 6 voltage monitor

inputs)

RTC/CMOS ICH7M built-in with on board Lithium battery

Expansion Slot PCI 104 plus (PCI only, No ISA support)

Onboard

Header /

Connectors

DF13 Socket x1 for LVDS

DF11 16-pin for VGA

44-pin box header x1 for IDE (90 degree)

2x8-pin header x1 for Gigabit LAN port

2x4-pin header x2 for 4 USB ports (one pin-header is 90

degree)

2x5-pin header x2 for COM1/COM2 (90 degree)

1x6-pin header x1 for PS2 KB/MS

Power

Connector 4-pin DC power connector x1 (+5V, +12V)

Digital I/O N/A

Watchdog

Timer Yes (256 segments, 0, 1, 2…255. sec/min)

Board Size 96 x 90mm (3.78” x 3.54”)

INTRODUCTION

Board Dimensions

4 IB804 User’s Manual

INSTALLATIONS

IB804 User’s Manual 5

Installations

This section provides information on how to use the jumpers and

connectors on the IB804 in order to set up a workable system. The topics

covered are:

Installing the Memory (SODIMM) ....................................................... 6

Jumpers and Connector on IB804 ......................................................... 7

INSTALLATIONS

Installing the Memory (SODIMM)

The IB804 CPU board supports one DDR2 memory socket that can

support up to 1GB memory, DDR2 400/533 (w/o ECC function).

Installing and Removing Memory Modules

To install the DDR2 modules, locate the memory slot on the board and

perform the following steps:

1. Hold the DDR2 module so that the key of the DDR2 module aligns

with that on the memory slot. Insert the module into the socket at a

slight angle (approximately 30 degrees). Note that the socket and

module are both keyed, which means that the module can be installed

only in one direction.

2. To seat the memory module into the socket, apply firm and even

pressure to each end of the module until you feel it slip down into the

socket.

3. With the module properly seated in the socket, rotate the module

downward. Continue pressing downward until the clips at each end

lock into position.

4. To remove the DDR2 module, press the clips with both hands.

6 IB804 User’s Manual

Inhaltsverzeichnis

Andere IBASE Technology Hauptplatine Handbücher

IBASE Technology

IBASE Technology MI889 Bedienungsanleitung

IBASE Technology

IBASE Technology MI980 Bedienungsanleitung

IBASE Technology

IBASE Technology IB818 Bedienungsanleitung

IBASE Technology

IBASE Technology MB991 Bedienungsanleitung

IBASE Technology

IBASE Technology IB112 Bedienungsanleitung

IBASE Technology

IBASE Technology AFW-3000 Bedienungsanleitung

IBASE Technology

IBASE Technology MI992 Bedienungsanleitung

IBASE Technology

IBASE Technology MI920 Bedienungsanleitung

IBASE Technology

IBASE Technology IBR115 Bedienungsanleitung

IBASE Technology

IBASE Technology IB100 Bedienungsanleitung

IBASE Technology

IBASE Technology MB892 Bedienungsanleitung

IBASE Technology

IBASE Technology MI900 Bedienungsanleitung

IBASE Technology

IBASE Technology BISD3-QM77 Bedienungsanleitung

IBASE Technology

IBASE Technology IB827 Bedienungsanleitung

IBASE Technology

IBASE Technology MI910 Bedienungsanleitung

IBASE Technology

IBASE Technology IB704 Bedienungsanleitung

IBASE Technology

IBASE Technology MI959 Bedienungsanleitung

IBASE Technology

IBASE Technology IB113 Bedienungsanleitung

IBASE Technology

IBASE Technology MB991AF Bedienungsanleitung

IBASE Technology

IBASE Technology MB870 Bedienungsanleitung

IBASE Technology

IBASE Technology IB818F Series Bedienungsanleitung

IBASE Technology

IBASE Technology ET980 Series Bedienungsanleitung

IBASE Technology

IBASE Technology MI963F Bedienungsanleitung

IBASE Technology

IBASE Technology MBN806 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung