IBASE Technology BISD3-QM77 Bedienungsanleitung

BISD3-QM77

Intel®Gen. 2 CoreTM i3/i5 based

Mini ITX Motherboard

User’s Manual

Version 1.0

(Nov. 2016)

BISD3-QM77 User’s Manual

No part of this publication may be reproduced, copied, stored in a retrieval system,

translated into any language or transmitted in any form or by any means,

electronic, mechanical, photocopying, or otherwise, without the prior written

consent of IBASE Technology, Inc. (hereinafter referred to as “IBASE”).

Disclaimer

IBASE reserves the right to make changes and improvements to the products

described in this document without prior notice. Every effort has been made to

ensure the information in the document is correct; however, IBASE does not

guarantee this document is error-free.

IBASE assumes no liability for incidental or consequential damages arising from

misapplication or inability to use the product or the information contained herein,

nor for any infringements of rights of third parties, which may result from its use.

Trademarks

All the trademarks, registrations and brands mentioned herein are used for

identification purposes only and may be trademarks and/or registered trademarks

of their respective owners.

BISD3-QM77 User’s Manual

iii

Compliance

WEEE

This product must not be disposed of as normal household

waste, in accordance with the EU directive of for waste

electrical and electronic equipment (WEEE - 2012/19/EU).

Instead, it should be disposed of by returning it to a

municipal recycling collection point. Check local

regulations for disposal of electronic products.

Green IBASE

This product is compliant with the current RoHS

restrictions and prohibits use of the following substances

in concentrations exceeding 0.1% by weight (1000 ppm)

except for cadmium, limited to 0.01% by weight (100 ppm).

•Lead (Pb)

•Mercury (Hg)

•Cadmium (Cd)

•Hexavalent chromium (Cr6+)

•Polybrominated biphenyls (PBB)

•Polybrominated diphenyl ether (PBDE)

BISD3-QM77 User’s Manual

Important Safety Information

Carefully read the precautions before using the board.

Environmental conditions:

Use this product in environments with ambient temperatures between 0˚C

and 60˚C.

Do not leave this product in an environment where the storage temperature

may be below -20°C (-4°F) or above 80°C (176°F). To prevent from

damages, the product must be used in a controlled environment.

Care for your IBASE products:

Before cleaning the PCB, unplug all cables and remove the battery.

Clean the PCB with a circuit board cleaner or degreaser, or use cotton swabs

and alcohol.

Vacuum the dust with a computer vacuum cleaner to prevent the fan from

being clogged.

WARNING.

Attention during use:

Do not use this product near water.

Do not spill water or any other liquids on this product.

Do not place heavy objects on the top of this product.

Anti-static precautions

Wear an anti-static wrist strap to avoid electrostatic discharge.

Place the PCB on an anti-static kit or mat.

Hold the edges of PCB when handling.

Touch the edges of non-metallic components of the product instead of the

surface of the PCB.

Ground yourself by touching a grounded conductor or a grounded bit of metal

frequently to discharge any static.

CAUTION

Danger of explosion if the internal lithium-ion battery is replaced by an incorrect

type. Replace only with the same or equivalent type recommended by the

manufacturer. Dispose of used batteries according to the manufacturer’s

instructions or recycle them at a local recycling facility or battery collection point.

BISD3-QM77 User’s Manual

Warranty Policy

IBASE standard products:

24-month (2-year) warranty from the date of shipment. If the date of shipment

cannot be ascertained, the product serial numbers can be used to determine

the approximate shipping date.

3rd-party parts:

12-month (1-year) warranty from delivery for the 3rd-party parts that are not

manufactured by IBASE, such as CPU, CPU cooler, memory, storage

devices, power adapter, panel and touchscreen.

＊PRODUCTS, HOWEVER, THAT FAIL DUE TO MISUSE, ACCIDENT,

IMPROPER INSTALLATION OR UNAUTHORIZED REPAIR SHALL BE

TREATED AS OUT OF WARRANTY AND CUSTOMERS SHALL BE BILLED

FOR REPAIR AND SHIPPING CHARGES.

Technical Support & Services

1. Visit the IBASE website at www.ibase.com.tw to find the latest information

about the product.

2. If you need any further assistance from your distributor or sales

representative, prepare the following information of your product and

elaborate upon the problem.

Product model name

Product serial number

Detailed description of the problem

The error messages in text or in screenshots if there is any

The arrangement of the peripherals

Software in use (such as OS and application software, including the

version numbers)

3. If repair service is required, you can download the RMA form at

http://www.ibase.com.tw/english/Supports/RMAService/. Fill out the form and

contact your distributor or sales representative.

 
 
 
vi 
BISD3-QM77 User’s Manual 
 
Table of Contents 
Compliance.....................................................................................iii 
Important Safety Information........................................................iv 
Warranty Policy ...............................................................................v 
Technical Support & Services .......................................................v 
Chapter 1 General Information.............................................1 
1 Introduction .........................................................................................2 
2 Features..............................................................................................2 
3 Packing List.........................................................................................3 
4 Specifications......................................................................................4 
5 Block Diagram.....................................................................................6 
6 Overview.............................................................................................7 
7 Dimensions .........................................................................................9 
Chapter 2 HardwareConfiguration........................................10 
1 Essential Installations Before You Begin...........................................11 
1.1 Installing the Memory...........................................................11 
2 Setting the Jumpers ..........................................................................12 
2.1 How to Set Jumpers.............................................................12 
3 Jumper & Connector Locations .........................................................13 
4 Jumpers Quick Reference.................................................................14 
4.1 CMOS Data Clearance (J12)...............................................14 
4.2 ME Register Clearance (J15) ..............................................15 
4.3 AT / ATX Mode Selection (JP7)...........................................16 
4.4 COM1 RS-232/422/485 Power Selection (JP1)...................17 
4.5 COM2 RS-232/422/485 Power Selection (JP2)...................18 
4.6 Brightness Selection (JP3)..................................................19 
5 Connectors Quick Reference.............................................................20 
5.1 COM1 & COM2 RS-232/422/485 Port (CN1).......................21 
5.2 VGA & DVI-D Ports (CN2)...................................................22 
5.3 USB 3.0 Port (CN3, CN5, CN7)...........................................22 
5.4 HDMI Port (CN4).................................................................22 
5.5 LAN Port & USB 2.0 Ports (CN6, CN11) .............................23 
5.6 HD Audio Jacks (CN12)......................................................23 

 
 
 
BISD3-QM77 User’s Manual 
vii 
 
5.7 SATA III Port (CN8, CN9)....................................................23 
5.8 LVDS Connectors (CN10)...................................................24 
5.9 DC Power Input Connector (J1)...........................................25 
5.10 DDR3 SO-DIMM Socket (J2, J3).........................................25 
5.11 Half-Size Mini-PCIe (x1) Slot (J4)........................................26 
5.12 Full-Size Mini-PCIe (x1) / mSATA Slot (J7).........................26 
5.13 HDD Power Connector (J5, J6)...........................................27 
5.14 Front Panel Audio Control Connector (J9)...........................27 
5.15 COM3 & COM4 RS-232 Connector (J10, J11)....................28 
5.16 Front Panel Function Connector (J13).................................28 
5.17 Digital I/O (J14)...................................................................29 
5.18 LCD Backlight Connector (JP4, JP5)...................................30 
5.19 Amplifier Output Connector (JP9)........................................31 
5.20 CPU Fan Power Connector (CPU_FAN1) ...........................31 
5.21 System Fan Power Connector (SYS_FAN1) .......................32 
Chapter 3 Drivers Installation.............................................33 
1 Introduction .......................................................................................34 
2 Intel®Chipset Software Installation Utility..........................................35 
3 VGA Driver Installation......................................................................37 
4 HD Audio Driver Installation...............................................................39 
5 LAN Driver Installation.......................................................................41 
6 Intel®iAMT 8.0 Driver Installation......................................................43 
Chapter 4 BIOS Setup..........................................................45 
1 Introduction .......................................................................................46 
2 BIOS Setup.......................................................................................46 
3 Main Settings ....................................................................................48 
4 Advanced Settings ............................................................................49 
4.1 ACPI Computing ..................................................................50 
4.2 Wake up Event Setting.........................................................51 
4.3 CPU Configuration ...............................................................52 
4.4 SATA Configuration .............................................................53 
4.5 Shutdown Temperature Configuration..................................54 
4.6 USB Configuration ...............................................................55 
4.7 Super IO Configuration.........................................................56 
4.8 Hardware Monitor.................................................................58 
4.9 CPU PPM Configuration.......................................................59 
5 Chipset Settings................................................................................60 

viii

BISD3-QM77 User’s Manual

4.5.1 PCH-IO Configuration ..........................................................61

4.5.2 System Agent (SA) Configuration.........................................63

4.6 Boot Settings.....................................................................................65

4.7 Security Settings ...............................................................................66

4.8 Save & Exit Settings..........................................................................67

Appendix........................................................................................68

A. I/O Port Address Map........................................................................69

B. Interrupt Request Lines (IRQ)............................................................73

C. Watchdog Timer Configuration..........................................................75

Chapter 1

General Information

The information provided in this chapter includes:

Features

Packing List

Optional Accessories

Block Diagram

Specifications

Board Overview

Board Dimensions

BISD3-QM77 User’s Manual

1.1 Introduction

BISD3-QM77 is a Mini ITX single board computer based on the platform of Intel®

Gen. 2 CoreTM i3-2330M / i5-2520M. This board offers extensive I/O support,

flexible display port connection and iAMT management. It is able to be operated at

the ambient operating temperature ranging from 0 ~ 60 °C, and even from -20 ~ 80

°C for storage.

Photo of BISD3-QM77

1.2 Features

2 x DDR3L-1066/1333 SO-DIMM slots, expandable up to 16 GB

Output through HDMI, DVI-D, or VGA ports

Configurable watchdog timer and digital I/O

2 x GbE LAN, 4 x USB 2.0, 4 x USB 3.0, 4 x COM, 2 x SATA III

Onboard Intel®Gen. 2 CoreTM i3-2330M / i5-2520M

Inhaltsverzeichnis

Andere IBASE Technology Hauptplatine Handbücher

IBASE Technology

IBASE Technology IB981AF-C226 Bedienungsanleitung

IBASE Technology

IBASE Technology MI836F Bedienungsanleitung

IBASE Technology

IBASE Technology MB980 Bedienungsanleitung

IBASE Technology

IBASE Technology MB995 Bedienungsanleitung

IBASE Technology

IBASE Technology MI997AF Bedienungsanleitung

IBASE Technology

IBASE Technology MB870 Bedienungsanleitung

IBASE Technology

IBASE Technology MI959 Bedienungsanleitung

IBASE Technology

IBASE Technology IB730 Bedienungsanleitung

IBASE Technology

IBASE Technology MI805 Bedienungsanleitung

IBASE Technology

IBASE Technology IB112 Bedienungsanleitung

IBASE Technology

IBASE Technology MI957 Bedienungsanleitung

IBASE Technology

IBASE Technology MB820 Bedienungsanleitung

IBASE Technology

IBASE Technology IB905 Bedienungsanleitung

IBASE Technology

IBASE Technology MB991 Bedienungsanleitung

IBASE Technology

IBASE Technology MI945P Bedienungsanleitung

IBASE Technology

IBASE Technology MBN500 Bedienungsanleitung

IBASE Technology

IBASE Technology IB831-NB Bedienungsanleitung

IBASE Technology

IBASE Technology MI811F-420 Bedienungsanleitung

IBASE Technology

IBASE Technology MB966 Bedienungsanleitung

IBASE Technology

IBASE Technology MB898 Bedienungsanleitung

IBASE Technology

IBASE Technology IB800 Bedienungsanleitung

IBASE Technology

IBASE Technology IB804 Bedienungsanleitung

IBASE Technology

IBASE Technology IB885 Bedienungsanleitung

IBASE Technology

IBASE Technology MB894 Bedienungsanleitung

Beliebte Hauptplatine Handbücher anderer Marken

DFI

DFI SD170 Bedienungsanleitung

ASROCK

ASROCK ROMED8-2T Bedienungsanleitung

Asus

Asus P2L97A Bedienungsanleitung

Winmate

Winmate IC70 Bedienungsanleitung

Asus

Asus MES-B Bedienungsanleitung

Grantech

Grantech SYS8F377VGGA-3OMN Bedienungsanleitung

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Bedienungsanleitung

Texas Instruments

Texas Instruments ADS8372EVM Bedienungsanleitung

Commell

Commell MS-C73 Bedienungsanleitung

Gigabyte

Gigabyte GA-9IVDT Bedienungsanleitung

IBT Technologies

IBT Technologies MB860 Bedienungsanleitung

Nvidia

Nvidia TEGRA DG-04927-001_V01 Bedienungsanleitung

Intel

Intel D33217CK Bedienungsanleitung

Asus

Asus F1A55-M LX PLUS R2.0 Bedienungsanleitung

EPC

EPC EPC9147C Bedienungsanleitung

Asus

Asus EX-B760M-V5 D4 Bedienungsanleitung

EPOX

EPOX MU-8KHA0010 Bedienungsanleitung

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Bedienungsanleitung