IBM POWER GXT135P Graphics PCI Leitfaden
POWER GXT135P Graphics PCI Adapter
Installation and Using Guide
SA23-1256-00
First Edition (September 2001)
Before using this information and the product it supports, read the information in “Safety Information” on page v and
“Appendix B. Notices” on page 17.
A reader’s comment form is provided at the back of this publication. If the form has been removed, address comments
to Publications Department, Internal Zip 9561, 11400 Burnet Road, Austin, Texas 78758-3493. To send comments
electronically, use this commercial internet address: [email protected]. Any information that you supply may be
used without incurring any obligation to you.
©International Business Machines Corporation 2001. All rights reserved.
Note to U.S. Government Users – Documentation related to restricted rights – Use, duplication, or disclosure is subject
to the restrictions set forth in the GSA ADP Schedule Contract with IBM Corp.
Note
Before you install this product and use this information, be sure to read the product warranties and
notices information included with the system unit into which you are installing the product.
Contents
Safety Information.......................v
Handling Static-Sensitive Devices.................vii
About This Book .......................ix
ISO 9000 ..........................ix
RelatedPublications......................ix
Trademarks .........................ix
Chapter 1. Overview ......................1
Specific Hardware Characteristics ..................1
POWER GXT135P Graphics PCI Adapter ..............1
Display Power Management ....................1
Software Requirements .....................2
Chapter 2. Preparing for Installation ................3
Checking Prerequisites .....................3
Chapter 3. Installing Device Driver Software .............5
AIX Device Driver Software Installation ................5
Chapter 4. Installing the POWER GXT135P Graphics PCI Adapter ......7
Installing the Adapter ......................7
Troubleshooting ........................8
Checking Cables ......................8
Verifying AIX Software Installation .................8
Checking Console ......................9
Verifying AIX Hardware Installation ................9
Chapter 5. Display Information ..................11
Changing Resolution and Refresh Rates ...............11
Appendix A. Communications Statements ..............13
Federal Communications Commission (FCC) Statement ..........13
European Union (EU) Statement ..................14
International Electrotechnical Commission (IEC) Statement .........14
United Kingdom Telecommunications Safety Requirements .........14
Avis de conformitéaux normes du ministère des Communications du Canada . . . 15
Canadian Department of Communications Compliance Statement .......15
VCCI Statement .......................15
Radio Protection for Germany ...................15
Appendix B. Notices .....................17
iii
iv Installation and Using Guide
Safety Information
DANGER
An electrical outlet that is not correctly wired could place hazardous voltage
on metal parts of the system or the devices that attach to the system. It is the
responsibility of the customer to ensure that the outlet is correctly wired and
grounded to prevent an electrical shock.
Before installing or removing signal cables, ensure that the power cables for
the system unit and all attached devices are unplugged.
When adding or removing any additional devices to or from the system,
ensure that the power cables for those devices are unplugged before the
signal cables are connected. If possible, disconnect all power cables from the
existing system before you add a device.
Use one hand, when possible, to connect or disconnect signal cables to
prevent a possible shock from touching two surfaces with different electrical
potentials.
During an electrical storm, do not connect cables for display stations, printers,
telephones, or station protectors for communications lines.
v
vi Installation and Using Guide
Handling Static-Sensitive Devices
Attention: Static electricity can damage this device and your system unit. To avoid
damage, keep this device in its anti-static protective bag until you are ready to install it.
To reduce the possibility of electrostatic discharge, follow the precautions listed below:
vLimit your movement. Movement can cause static electricity to build up around you.
vHandle the device carefully, holding it by its edges or its frame.
vDo not touch solder joints, pins, or other printed circuitry.
vDo not leave the device where others can handle and possibly damage the device.
vWhile the device is still in its anti-static package, touch it to an unpainted metal part
of the system unit for at least two seconds. (This drains static electricity from the
package and from your body).
vRemove the device from its package and install it directly into your system unit
without setting it down. If it is necessary to set the device down, place it on its
static-protective package. (If your device is an adapter, place it component-side up).
Do not place the device on your system unit cover or on a metal table.
vTake additional care when handling devices during cold weather, as heating reduces
indoor humidity and increases static electricity.
vii
viii Installation and Using Guide
About This Book
This book provides information about the POWER GXT135P Graphics PCI Adapter and
its associated device driver software. Use this book together with your specific system
unit and operating system documentation.
ISO 9000
ISO 9000 registered quality systems were used in the development and manufacturing
of this product.
Related Publications
The following publications contain related information:
vSystem unit documentation for information specific to your hardware configuration
vOperating system documentation for information specific to your software
configuration
vPCI Adapter Placement Reference Guide (for the latest version, you may need to
contact your marketing representative)
Trademarks
The following term is a trademark of International Business Machines Corporation in the
United States, other countries, or both:
vAIX
Other company, product, and service names may be trademarks or service marks of
others.
ix
xInstallation and Using Guide
Inhaltsverzeichnis
Andere IBM Adapter Handbücher
IBM
IBM Flex System EN4132 Bedienungsanleitung
IBM
IBM TOKEN-RING PCI FAMILY ADAPTER Bedienungsanleitung
IBM
IBM 10/100 EtherJet CardBus Adapter Technisches Handbuch
IBM
IBM Advanced SerialRAID Adapters SA33-3285-02 Bedienungsanleitung
IBM
IBM 16/4 Token-Ring Bedienungsanleitung
IBM
IBM 10/100 EtherJet CardBus Adapter with 56K... Bedienungsanleitung
IBM
IBM PCI WAN 2 Port S91 Bedienungsanleitung
IBM
IBM OpenCAPI Bedienungsanleitung
IBM
IBM Remote Supervisor Adapter II Bedienungsanleitung
IBM
IBM Power GXT800P Bedienungsanleitung
IBM
IBM ISA Bedienungsanleitung
IBM
IBM High IOPS Adapter Handbuch
IBM
IBM TotalStorage FAStT FC2-133 Bedienungsanleitung
IBM
IBM 10GBE Bedienungsanleitung
IBM
IBM L70 Bedienungsanleitung
IBM
IBM 10/100/1000 Base-TX Ethernet PCI-X Adapter Leitfaden
IBM
IBM Netfinity 10/100 Ethernet Adapters Bedienungsanleitung
IBM
IBM EN2024 Bedienungsanleitung
IBM
IBM TURBOWAYS 622 PCI MMF ATM Leitfaden
IBM
IBM PCI Dual Channel Ultra3 SCSI Adapter Leitfaden
