IBM ISeries Series Administratorhandbuch

iSeries

iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890,

SB2, and SB3

Analyze Hardware Problems

(System Reference Codes)

Version 5 Release 2

SY44-5915-01

ERserver



iSeries

iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890,

SB2, and SB3

Analyze Hardware Problems

(System Reference Codes)

Version 5 Release 2

SY44-5915-01

ER s e r v e r



Note

Before using this information and the product it supports, be sure to read the information in

“Safety and Environmental Notices” on page 3 and “Notices” on page 299.

First Edition (August 2002)

This edition applies only to reduced instruction set computer (RISC) systems.

US Government Users Restricted Rights – Use, duplication or disclosure restricted by GSA ADP Schedule Contract

with IBM Corp.

System Reference Codes

This topic uses a System reference code on the problem summary form to:

vFind a list of possible failing items.

vPoint to additional isolation procedures (if available).

System reference codes (SRCs) can appear on the control panel, the product

activity log (PAL), the Main Storage Dump Manager display, or on various

displays within DST or SST.

1. Were you directed here from another procedure, including the Starting point for

all problems?

vNo: Go to the Starting point for all problems.

vYes: Determine which SRC table to use.

For SRCs appearing on the control panel, the first 4 characters represent the

SRC type and the second 4 characters represent the URC. For SRCs

appearing in the Product Activity Log or on other software displays, use

characters 1 through 4 of word 1 for the SRC type and characters 5 through 8

of word 1 for the URC.

The SRC table name is the same as the SRC type. For SRCs appearing on the

control panel, the SRC type is the first 4 characters (see Figure 1 on page 2 for

control panel layout). For SRCs appearing in the Product Activity Log or on

other software displays, use characters 1 through 4 of word 1 for the SRC

type. The reference code tables only support 8-character SRC formats. If the

SRC provided is in a 4 character format, contact your next level of support

for assistance.

You will also need to know what the unit reference code (URC) is. For SRCs

appearing on the control panel, the URC is the second 4 characters of the

SRC (see Figure 1 on page 2 for control panel layout). For SRCs appearing in

the Product Activity Log or on other software displays, use characters 5

through 8 of word 1 for the URC. The URCs are listed within the SRC tables,

arranged in hexadecimal sequence with numeric characters listed before

alphabetic characters. For example, URCs 0001 through 0009 are listed before

URCs 000A through 000F.

For additional information about using the Control Panel, see SRC address

formats.

Continue with the next step for instructions on finding and using the SRC

tables.

2. Links to all of the SRC tables can be found in the System reference code list.

Once you find the correct SRC table, correct the problem by performing the

action indicated for the URC in the Description/Action column of the table. If

this does not correct the problem, exchange the failing items or parts listed in

the Failing Item column in the order that they are listed.

If no action is indicated in the SRC table, exchange the failing items or parts

listed in the table.

Notes:

a. When exchanging the failing items, use the Remove and replace procedures.

b. When instructed to perform problem isolation procedures, go to the

Problem isolation procedures.

c. Any additional information you need to complete the procedure, may be

found in the Part locations and listings.

The failing item listed first should be exchanged first. If exchanging the first

failing item does not correct the problem, reinstall the original item and

exchange the next failing item listed. Continue to exchange and reinstall the

failing items, one at a time, until the problem is corrected. If exchanging the

failing items does not correct the problem, ask your next level of support for

assistance.

Figure 1. System Unit Control Panel layout

2iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference Codes)

Now refer to the System reference code list and follow the instructions in the

SRC table. The list contains all SRC tables for critical resources available at the

time this edition was published. If you cannot find an SRC table, ask your next

level of support for assistance.

This ends the procedure.

Refer to the System reference code list for more information.

Safety and Environmental Notices

Danger Notices

A danger notice calls attention to a situation that is potentially lethal or extremely

hazardous to people.

Use the following danger notices throughout this book:

DANGER

To prevent a possible electrical shock during an electrical storm, do not

connect or disconnect cables or station protectors for communications lines,

display stations, printers, or telephones. (RSFTD003)

DANGER

To prevent a possible electrical shock from touching two surfaces with

different electrical grounds, use one hand, when possible, to connect or

disconnect signal cables. (RSFTD004)

DANGER

To prevent a possible electrical shock, do not use the port tester during

electrical storms. (RSFTD006)

DANGER

An electrical outlet that is not correctly wired could place hazardous voltage

on metal parts of the system or the products that attach to the system. It is the

customer’s responsibility to ensure that the outlet is correctly wired and

grounded to prevent an electrical shock. (RSFTD201)

DANGER

To prevent a possible electrical shock when installing the system, ensure that

the power cords for all devices are unplugged before installing signal cables.

(RSFTD202)

System Reference Codes 3

DANGER

To prevent a possible electrical shock when adding or removing any devices

to or from the system, ensure that the power cords for those devices are

unplugged before the signal cables are connected or disconnected. If possible,

disconnect all power cords from the existing system before you add or

remove a device. (RSFTD203)

DANGER

To prevent power from switching on automatically during service procedures,

select manual or secure mode on the system unit control panel or disconnect

the cables that connect to J15 and J16 on the frame being serviced.

(RSFTD211)

DANGER

Use caution when installing or modifying telephone lines. Disconnect the

lines at the network interface before working with telephone wires that are

not insulated. Never install telephone jacks that are not waterproof in wet

locations. Do not install or modify telephone lines or use a telephone (other

than a cordless type) during an electrical storm. Do not use a telephone to

report a gas leak in the area of the leak. (RSFTD213)

Caution Notices

A caution notice calls attention to a situation that is potentially hazardous to

people because of some existing condition.

CAUTION:

Be careful when removing or installing this part or unit. This part or unit is

heavy, but has a weight smaller than 18 kilograms (39.7 pounds). (RSFTC201)

CAUTION:

The weight of this part or unit is between 18 and 32 kilograms (39.7 and 70.5

pounds). It takes two persons to safely lift this part or unit. (RSFTC204)

CAUTION:

The battery is a lead-acid battery. To avoid possible explosion, do not burn.

Exchange only with the IBM-approved part. Recycle or discard the battery as

instructed by local regulations.

In the United States, IBM has a process for the collection of this battery. For

information, call 1-800-426-4333. Have the IBM part number for the battery unit

available when you call. (RSFTC225)

CAUTION:

The battery is a lithium battery. To avoid possible explosion, do not burn or

charge the battery. Exchange only with the IBM-approved part. Discard the

battery as instructed by local regulations. (RSFTC227)

CAUTION:

The circuit card contains lead solder. To avoid the release of lead (Pb) into the

environment, do not burn. Discard the circuit card as instructed by local

regulations. (RSFTC234)

4iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference Codes)

CAUTION:

This assembly has a circuit card that contains lead solder. To avoid the release of

lead (Pb) into the environment, do not burn. Discard the assembly as instructed

by local regulations. (RSFTC235)

CAUTION:

The optical link card contains a laser. To avoid the release of toxic substances

into the environment, do not burn. Discard the optical link as instructed by local

regulations. (RSFTC236)

Attention Notices

An attention notice indicates the possibility of damage to a program, device,

system, or data.

Laser Safety Information

CAUTION:

This product may contain a CD-ROM which is a class 1 laser product.

(RSFTC240)

Product Recycling and Disposal

Components of the system, such as structural parts and circuit cards, can be

recycled where recycling facilities exist. IBM does not currently collect and recycle

used IBM products from customers in the United States other than those products

that are involved in trade-in programs. Companies are available to disassemble,

reutilize, recycle, or dispose of electronic products. Contact an IBM account

representative for more information.

The system unit contains batteries and circuit boards with lead solder. Before you

dispose of this unit, these batteries and circuit boards must be removed and

discarded according to local regulations or recycled where facilities exist. This book

contains specific information on each battery type where applicable.

Battery Return Program

In the United States, IBM has established a collection process for reuse, recycling,

or proper disposal of used IBM batteries and battery packs. For information on

proper disposal of the batteries in this unit, please contact IBM at 1-800-426-4333.

Please have the IBM part number that is listed on the battery available when you

make your call. For information on battery disposal outside the United States,

contact your local waste disposal facility.

Environmental Design

The environmental efforts that have gone into the design of the system signify

IBM’s commitment to improve the quality of its products and processes. Some of

these accomplishments include the elimination of the use of Class I

ozone-depleting chemicals in the manufacturing process, reductions in

manufacturing wastes, and increased product energy efficiency. For more

information, contact an IBM account representative.

System Reference Codes 5

Print this topic

To view or download the PDF version, select System Reference Codes (about xxx

KB or xxx pages).

Other information

You can also view or print any of the following PDFs:

vManuals:

Note to Writers: If you only have one PDF, use a sentence here instead of this

nested list.

–PDF 1 (link to your PDF file) (about xxx pages)

–PDF 2 (link to your PDF file) (about xxx pages)

Saving PDF files

To save a PDF on your workstation for viewing or printing:

1. Right-click the PDF in your browser (right-click the link above).

2. Click Save Target As...

3. Navigate to the directory in which you would like to save the PDF.

4. Click Save.

Downloading Adobe Acrobat Reader

If you need Adobe Acrobat Reader to view or print these PDFs, you can download

a copy from theAdobe Web site

(www.adobe.com/products/acrobat/readstep.html) .

(0000) Control Panel Reference Codes

The control panel detected a failure.

1. Look at the four rightmost characters of the Data display for word 1. These

four characters are the unit reference code.

2. Find the unit reference code in the following tables, depending on the system

model.

For details on the Failing Item column entries, see the Control Panel Failing Items

Detail table, which follows the Reference Code tables below.

Choose from the appropriate model:

vModels 270, 800, 810, 820, 825

vModels 830, 840, 870, 890, SB2, and SB3

Table 1. (0000) Control Panel Reference Codes for system Models 270, 800, 810,

820, and 825

6iSeries: iSeries 270, 800, 810, 820, 825, 830, 840, 870, 890, SB2, and SB3 Analyze Hardware Problems (System Reference Codes)

Andere Handbücher für iSeries Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IBM Server Handbücher

IBM

IBM xSeries 382 Bedienungsanleitung

IBM

IBM 8480 - Eserver xSeries 205 Betriebsanleitung

IBM

IBM x3105 - System - 4347 Bedienungsanleitung

IBM

IBM BladeCenter JS20 Betriebsanleitung

IBM

IBM 88553RX Bedienungsanleitung

IBM

IBM Power 750 Express Betriebsanleitung

IBM

IBM eServer 330 xSeries Bedienungsanleitung

IBM

IBM System x3650 M4 BD Type 5466 Montage- und Wartungsanleitung

IBM

IBM 783722U Bedienungsanleitung

IBM

IBM S822LC Bedienungsanleitung

IBM

IBM OpenPower 720 Installationsanleitung

IBM

IBM eServer 370 xSeries Bedienungsanleitung

IBM

IBM Power System LC922 Bedienungsanleitung

IBM

IBM 72335LU - System x3850 M2 Bedienungsanleitung

IBM

IBM S822LC Installationsanleitung

IBM

IBM SAN Volume Controller 2145-CF8 Handbuch

IBM

IBM Netfinity 3500 M10 Bedienungsanleitung

IBM

IBM 8832 Kurzanleitung

IBM

IBM BladeCenter HS22 Type 7870 Bedienungsanleitung

IBM

IBM P260 Montage- und Wartungsanleitung

IBM

IBM BladeCenter HS22 Handbuch

IBM

IBM BladeCenter HS22 Handbuch

IBM

IBM Carrier Grade X3650 T Bedienungsanleitung

IBM

IBM xSeries 206 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung

IBM iSeries Series Administratorhandbuch

Beliebte Server Handbücher anderer Marken