IBM BladeCenter QS20 Bedienungsanleitung

Welcome.

Thank you for buying an

IBM blade server.

For more information about your

BladeCenter components and

features, you can view the

publications on the

http://www.ibm.com/support/

Your blade

server features superior

performance, availability,

and scalability.

This

contains information for setting up,

configuring, and using your

blade server.

Additionally, a service information

label is attached to each BladeCenter

unit and blade server. This label

provides a graphical summary of

many of the installation and service

activities that are associated with

each device.

CD or download them from the

IBM Support Web site.

Go to

Installation and User’s Guide

Documentation

Installation and

User’s Guide

The blade server is now

ready to use. Be sure to

blade server on the

IBM Support Web site.

Before installing the BladeCenter QS20

in a BladeCenter unit, complete the

following procedures:

Install and configure the rack according

to the documentation that came with the rack.

Install the BladeCenter unit into the rack and

configure it, according to the documentation

that comes with the BladeCenter unit.

Supply 200 - 240 V ac to the BladeCenter unit.

Install the latest firmware in all BladeCenter

components.

Before you install the blade server into the

BladeCenter unit, install devices such as

drives, memory modules, and processor or

expansion cards in the blade server, if applicable.

Install the blade server in the BladeCenter unit.

See Chapter 4 for more information.

BladeCenter QS20 Type 0200

Install the operating system.

See Chapter 7 for more information.

Install additional applications

according to the instructions that

comes with the applications.

Configure the blade server.

See Chapter 6 for more information.

Server Support

Yes

See the troubleshooting

information that comes with

the server to determine

the cause of the problem

and the action to take.

Update the firmware to the

latest level.

No Software

Yes

Hardware

Is the server working

correctly?

Is the problem

solved?

Hardware or

software problem?

View support telephone numbers at

http://www.ibm.com/planetwide/.

View information about IBM Support Line at

or view support telephone numbers at

http://www.ibm.com/services/sl/products/

http://www.ibm.com/planetwide/.

http://www.ibm.com/support/mysupport/.

Yes

Check all cables for loose connections

and verify that all optional devices you

installed are on the ServerProven list at

http://www.ibm.com/servers/eserver/

serverproven/compat/us/.

Is the problem

solved?

Is the problem

solved?

BladeCenter QS20 Ty pe 0200

Installation and User’s Guide

SC33-8284-02



Note: Before using this information and the product it supports, read the general information in Appendix B, “Notices,”on page 61.

Third Edition (September 2006)

US Government Users Restricted Rights –Use, duplication or disclosure restricted by GSA ADP Schedule Contract

with IBM Corp.

Contents

Safety ............................v

Chapter 1.Introduction ......................1

The BladeCenter QS20 ......................1

The BladeCenter.........................2

Power modules and power module bays ...............2

Using this book .........................3

Related documentation ......................4

The Documentation CD ......................5

Hardware and software requirements ................5

Using the Documentation Browser .................6

Notices and statements used in this document..............7

Features and specifications .....................7

Reliability, availability, and serviceability features .............8

Chapter 2.Blade server power,controls,and indicators .........9

Turning on the blade server.....................9

Turning off the blade server ....................10

Blade server controls and LEDs...................11

System-board internal and option connectors ..............12

Chapter 3.Preparingthe BladeCenter unit ..............15

Preinstallation checklist ......................15

Chapter 4.Installingthe blade server in the BladeCenter unit ......17

Installing the blade server .....................17

Chapter 5.Installingand removingreplaceable units .........21

Installation guidelines ......................21

System reliability guidelines ...................21

Handling static-sensitive devices .................22

Removing the blade server from the BladeCenter unit ..........23

Opening the blade server cover...................25

Removing the blade-server bezel assembly ..............27

Installing the IDEhard disk drive ..................27

Installing InfiniBand .......................29

InfiniBand package content ...................29

What you need to install InfiniBand ................30

Installing InfiniBand ......................30

Replacing the battery ......................37

Completing the installation.....................40

Installing the blade server bezel assembly ..............40

Closing the blade server cover ..................42

Input/output connectors and devices .................43

Chapter 6.Configuringthe blade server...............45

Communicating with the blade server ................45

Using the command-line interface ..................46

Using the serial interface .....................46

Starting the management and configuration program in the Management Module 47

Integrating the Gigabit Ethernet controllers into the BladeCenter.......47

Blade server Ethernet controller enumeration ..............48

Upgrading the system firmware ...................48

©Copyright IBM Corp. 2005iii

Firmware package and contents .................49

Determining current blade server firmware code levels .........49

Installing the firmware .....................49

Installing the firmware manually..................50

Updating the host and service processor images ...........50

Updating the host firmware on PERM ...............50

Chapter 7.Installingthe operatingsystem ..............51

Chapter 8.Solvingproblems ...................53

Firmware startup process .....................53

Troubleshooting charts ......................54

Problems indicated by LEDs ...................54

Power problems .......................56

Network connection problems ..................56

Service processor problems ...................57

Recovering the system firmware code ................58

Starting the TEMP image ....................58

Recovering the TEMP image from the PERM image ..........58

AppendixA.Gettinghelp and technical assistance ..........59

Before you call .........................59

Using the documentation .....................59

Getting help and information from the World Wide Web ..........59

Software service and support ...................60

Hardware service and support ...................60

AppendixB.Notices ......................61

Edition notice .........................62

Trademarks ..........................64

Important notes.........................65

Product recycling and disposal ...................65

Battery return program ......................66

Electronic emission notices ....................66

Federal Communications Commission (FCC)statement .........66

Industry Canada Class Aemission compliance statement ........67

Australia and New Zealand Class Astatement ............67

United Kingdom telecommunications safety requirement.........67

Deutschsprachiger EUHinweis: Hinweis fürGeräte der Klasse A

EU-Richtlinie zur Elektromagnetischen Verträglichkeit .........67

Deutschland: Einhaltung des Gesetzes über die elektromagnetische

Verträglichkeit von Geräten .................68

Zulassungsbescheinigung laut dem Deutschen Gesetzüber die

elektromagnetische Verträglichkeit von Geräten (EMVG)vom 18.

September 1998 (bzw. der EMC EGRichtlinie 89/336)fürGeräte der

Klasse A........................68

European Union EMC Directive conformance statement .........68

Taiwanese Class Awarning statement ...............69

Japanese Voluntary Control Council for Interference (VCCI)statement ...69

Korean Class Awarning statement ................69

Power cords ..........................70

Index............................73

iv BladeCenter QS20 Type 0200: Installation and User’sGuide

Safety

Before installing this product, read the Safety Information.

Antes de instalar este produto, leia as Informações de Segurança.

Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.

Læssikkerhedsforskrifterne, førdu installerer dette produkt.

Lees voordat udit product installeert eerst de veiligheidsvoorschriften.

Ennen kuin asennat tämäntuotteen, lue turvaohjeet kohdasta Safety Information.

Avant d’installer ce produit, lisezles consignes de sécurité.

Vor der Installation dieses Produkts die Sicherheitshinweise lesen.

Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.

Les sikkerhetsinformasjonen (Safety Information)førdu installerer dette produktet.

Antes de instalar este produto, leia as Informações sobre Segurança.

©Copyright IBM Corp. 2005v

Antes de instalar este producto, lea la informaciónde seguridad.

Lässäkerhetsinformationen innan du installerar den härprodukten.

Important:

All caution and danger statements in this documentation begin with a

number. This number is used to cross reference an English caution or

danger statement with translated versions of the caution or danger

statement in the IBM Safety Information book.

For example, if acaution statement begins with anumber 1,

translations for that caution statement appear in the IBM Safety

Information book under statement 1.

Be sure to read all caution and danger statements in this

documentation before performing the instructions. Read any additional

safety information that comes with the blade server or optional device

before you install the device.

vi BladeCenter QS20 Type 0200: Installation and User’sGuide

Statement 1:

DANGER

Electrical current from power,telephone,and communication cables is

hazardous.

Toavoid ashockhazard:

vDonot connect or disconnect any cables or perform installation,

maintenance,or reconfiguration ofthis product duringan electrical

storm.

vConnect all power cords to aproperly wired and grounded electrical

outlet.

vConnect to properly wired outlets any equipment that will be attached to

this product.

vWhen possible,use one hand only to connect or disconnect signal

cables.

vNever turn on any equipment when there is evidence offire,water,or

structural damage.

vDisconnect the attached power cords,telecommunications systems,

networks,and modems before you open the device covers,unless

instructed otherwise in the installation and configuration procedures.

vConnect and disconnect cables as described in the followingtable when

installing, moving, or openingcovers on this product or attached

devices.

ToConnect: ToDisconnect:

1.Turn everything OFF.

2. First, attach all cables to devices.

3.Attach signal cables to connectors.

4. Attach power cords to outlet.

5.Turn device ON.

1.Turn everything OFF.

2. First, remove power cords from outlet.

3.Remove signal cables from connectors.

4. Remove all cables from devices.

Safety vii

Statement 2:

CAUTION:

When replacingthe lithium battery,use only IBM Part Number 33F8354 or an

equivalent type battery recommended by the manufacturer. Ifyour system has

amodule containingalithium battery,replace it only with the same module

type made by the same manufacturer. The battery contains lithium and can

explode ifnot properly used,handled,or disposed of.

Do not:

vThrow or immerse into water

vHeat to more than 100°C (212°F)

vRepair or disassemble

Dispose ofthe battery as required by local ordinances or regulations.

viii BladeCenter QS20 Type 0200: Installation and User’sGuide

Andere Handbücher für BladeCenter QS20

Inhaltsverzeichnis

Andere IBM Server Handbücher

IBM

IBM 72332SU Bedienungsanleitung

IBM

IBM SC25-R345-20 Bedienungsanleitung

IBM

IBM Power System AC922 Bedienungsanleitung

IBM

IBM 8837 - eServer xSeries 336 Bedienungsanleitung

IBM

IBM 8645 - Eserver xSeries 220 Betriebsanleitung

IBM

IBM RS/6000 44P Series 270 Bedienungsanleitung

IBM

IBM Power Systems 8247-42L Bedienungsanleitung

IBM

IBM System p Series Bedienungsanleitung

IBM

IBM QS21 - BladeCenter - 0792 Bedienungsanleitung

IBM

IBM BladeCenter JS20 Bedienungsanleitung

IBM

IBM Power System IC922 Bedienungsanleitung

IBM

IBM x3650 - System M2 - 7947 Bedienungsanleitung

IBM

IBM BladeCenter JS23 Bedienungsanleitung

IBM

IBM HS21 - BladeCenter - 8853 Bedienungsanleitung

IBM

IBM 88631SU - System x3850 - 8863 Bedienungsanleitung

IBM

IBM xSeries 455 Bedienungsanleitung

IBM

IBM System x3200 M3 Bedienungsanleitung

IBM

IBM 8482 - eServer xSeries 206 Bedienungsanleitung

IBM

IBM Flex System x440 Compute Node Montage- und Wartungsanleitung

IBM

IBM System x3250 M5 Bedienungsanleitung

IBM

IBM BladeCenter JS12 7998 Bedienungsanleitung

IBM

IBM LS20 - BladeCenter - 8850 Bedienungsanleitung

IBM

IBM DB2 9 Technisches Handbuch

IBM

IBM BladeCenter S 7779 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung