IBP HDM99 Bedienungsanleitung

HDM99

Dialysis Measuring System

User Manual

The information contained in this documentation can undergo changes

without special announcement. IBP Instruments GmbH takes no

responsibility with this document. The contained software is being

delivered on the basis of a general licence contract or in single license. Use

or reproduction of the software is allowed only in agreement with the

contractual arrangements. Whoever transfers this software and/or this

manual on magnetic tape, diskette or any other media, except for the

purpose of own use, without written authorization of the IBP Instruments

GmbH, is liable to prosecution.

Publisher:

IBP Instruments GmbH IBP Instruments Inc

Sutelstr. 7A 635 South Orange Avenue.

D 30659 Hannover Sarasota, FL 34236

Manual author:

Werner Pfingstmann

3rd Edition August 2000

Attention

Read these safety instructions before using the HDM99

•Please read the manual before using the HDM99.

•Keep away the device from unauthorized persons.

•Never use the HDM99 with connected battery charger

on a dialysis machine to which a patient is connected.

•Operate the instrument only in a dry environment, and

do not touch it with damp hands. Ensure that no fluids

intrude into the interior of the device or into the sockets

at the front.

•Apply a protection filter to the nozzle for the pressure

measurement .

•Avoid a discharge of static electricity over the sockets.

It could lead to the destruction of your measuring

device. Before touching the sockets and lines that are

connected with them, keep an eye on the discharging of

static electricity.

•Voltages above 40V can be dangerous. Take extreme

care while working with higher voltages.

•To avoid electrical shocks, and/or damage to your

measuring system, do not apply excess voltages above

40 V to the instrument.

•Only calibrate the device if you have understood the

consequences to their full extent.

•Do not open the device.

DELIVERY EXTENT.......................................................................................6

EC-CONFORMITY DECLARATION.............................................................7

GUARANTEE DIRECTIVES...........................................................................8

INTRODUCTION.............................................................................................9

CONNECTIONS................................................................................................ 10

CHARGE CONNECTION .................................................................................... 11

TURNING ON THE DEVICE................................................................................ 13

MAIN MENU ................................................................................................... 13

MEASUREMENT.............................................................................................. 15

TEMPERATURE MEASUREMENT............................................................. 17

CONDUCTIVITY MEASUREMENT............................................................ 18

CONDUCTIVITY AND TEMPERATURE MEASUREMENT.................... 21

FURTHER POSSIBLE MEASUREMENTS..................................................25

PH MEASUREMENT.....................................................................................26

PH-CALIBRATION IN THE MEASURING MODE .................................................... 30

FLOW MEASURING .....................................................................................31

MANAGEMENT OF DIFFERENT SENSORS ........................................................... 31

COUNTER....................................................................................................... 34

POOL MENU..................................................................................................35

VOLTAGE MEASUREMENT -PLOTTER.................................................. 36

VOLTAGE MEASUREMENT -OSCILLOSCOPE ......................................38

BATTERY VOLTAGE................................................................................... 40

INSTALLATION.............................................................................................41

LANGUAGE .................................................................................................... 41

SWITCH-OFF TIME........................................................................................... 41

ADJUST-RESET ............................................................................................... 42

CALIBRATION OF THE HDM99................................................................. 43

ADJUSTMENT................................................................................................. 43

CALIBRATION OF TEMPERATURE MEASUREMENT ............................................. 45

CALIBRATION OF CONDUCTIVITY MEASUREMENT............................................. 47

CALIBRATION OF THE PRESSURE MEASUREMENT.............................................. 51

CALIBRATION OF PH-MEASUREMENT............................................................... 53

PH-CALIBRATION........................................................................................ 54

CALIBRATION OF FLOW............................................................................55

CALIBRATION OF THE VOLTAGE MEASUREMENT ............................57

MAINTENANCE AND CARE OF THE HDM99...........................................58

STORAGE........................................................................................................58

CLEANING......................................................................................................59

CALIBRATION INTERVALS ...............................................................................60

SPECIFICATIONS FOR THE HDM99..........................................................62

RS-232-INTERFACE ......................................................................................64

HDMCMO STARTS BACKGROUND MEASUREMENT........................66

12964.12/ 24.7/ 750/ 7.00/ -0.03/ 0.05/6.12/1200/1000/79131/999999 + CR LF àà

73 SIGNS.........................................................................................................66

Introduction6

Delivery extent

The hardware of HDM99 consists of:

HDM99

Combined electrode conductivity / temperature

Flow-through connector for conductivity/temperature probe

Pressure measuring tube

Voltage measuring cables

Count input measuring cables

Battery charger

Standard solution conductivity 13,63 mS/cm

The documentation of HDM99 consists of this manual.

If you should miss anything, please contact your supplier.

Introduction 7

EC-Conformity Declaration

Hereby we declare that the HDM99 corresponds to the basic requirements

for protection according to the guidelines of the board for the assimilation

of legal regulations about electro-magnetic compatibility (89/336/EWG) of

the member states.

For the rating of the devices in view to their electro-magnetic compatibility

the following norms have been used:

Emission: EN 55022 Class B

Immission: IEC 801-3 Criterion A

IEC 801-2 Criterion A

IEC 801-4 Criterion B

This declaration is responsibly given for

IBP Instruments GmbH

Sutelstr. 7A

30659 Hannover

Dipl. Ing. Werner Pfingstmann

Managing director

Hannover, September 30, 1996

8Introduction

Guarantee directives

The existing product is a technical device which contains only modern

electronic components. During the manufacturing exclusively first choice

parts are used. Each device undergoes extensive tests before delivery.

IBP warrants that the device is free from defects in material and

workmanship for a period of 12 months beginning at the date of delivery.

Excluded from the guarantee are damages by improper treatment,

inappropriate usage, by connecting to excess voltages, modifications in the

device or through risks which the user has to cover by a suitable insurance

(fire, water, intrusion, robbery etc.)

All conceivable measures were met to assure the accuracy of this product-

documentation. IBP cannot grant any guarantee for the completeness and

the accuracy of the software and the documentation. IBP is not responsible

for damages (including, but not limited to, damages for loss of business

profits, business interruption, loss of data, and other special, incidental or

consequential damages) which emerge through the usage of the product by

the customer.

Introduction 9

Introduction

HDM99 is an innovative computer processed measuring system with which

nine parameters can be measured:

Conductivity

Temperature

Pressure

Flow

Voltage

Frequency

Period time

Events

The device has been developed for the usage on dialysis machines, but is

also usable in the labor in the environmental measuring technology.

The handling is uncomplicated and follows the motto: Only the manual is

necessary in cases of doubt.

The entire handling is led by dialogues. The calibration of the device by the

user is simple and gives no problems.

The display of measurement results is available n numerical and also in

graphical form.

Via the serial interface the measurements can be called independently of

the current display, and further processed or presented on a PC. For the

fault location at dialysis machines IBP has developed a program that

presents and processes measurements of the HDM99 and of the machine

together. Provided that the dialysis machine is equipped with an interface

according to RS232-or RS485-standard. Drivers for different instruments

are available or in preparation. The program runs under MS-Windows and

is therefore easy to operate.

10 Introduction

Connections

voltage conductivity pressure pH

and temperature

Voltage

The sockets are intended only for AC and DC voltages up to 40 V. They

are protected up to 80 V.

Conductivity / Temperature

The conductivity measurement is designed for quadropole technology.

Please use exclusively the electrode delivered with the device by IBP.

Pressure

To avoid damages at the pressure probe or inaccuracies in measurement,

ensure that no fluids intrude into the device.

We recommend the application of a protection filter.

The input bushes are intended exclusively for pH-electrodes. Other signals

may destroy the device.

Inhaltsverzeichnis

Andere IBP Messgerät Handbücher

IBP

IBP HDM97 Pocket Series Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung