PC
•
Microsoft®Windows®10 (32/64 bit)
•
Microsoft®Windows®8.1 (32/64 bit)*
*Except for the “RT” version.
•
Microsoft®Windows®7 (32/64 bit)
• A USB 1.1, 2.0, or 3.0 port
Cable
• A USB cable (User supplied)
Type A
Mini-B
NOTE:
• Depending on the length of a third-party USB
cable, the network device may not work correctly
even if the PC recognizes it. Use a cable as short
as possible.
• Depending on the network device, the
[CONSOLE] port shape may differ. Purchase a
proper USB cable.
USB DRIVER
INSTALLATION GUIDE
You can set up an Icom network device using a PC, by connecting it to the [CONSOLE] port of the network
device through a USB (Mini-B) cable.
Read this installation guide and install the USB driver to your PC, before connecting the USB cable.
This guide describes based on the following conditions:
• You have already downloaded the latest USB driver from the Icom Download Service website.
http://www.icom.co.jp/world/support/
• The Icom network device that you want to set up has a [CONSOLE] port.
• The operating system of the PC is Windows 10.
LThe installation steps or displayed dialog may differ, depending on the operating system.
TABLE OF CONTENTS
Icom, Icom Inc. and the Icom logo are registered trademarks of Icom Incorporated (Japan) in Japan, the United States, the United Kingdom,
Germany, France, Spain, Russia, Australia, New Zealand, and/or other countries.
Microsoft and Windows are registered trademarks of Microsoft Corporation in the United States and/or other countries.
All other products or brands are registered trademarks or trademarks of their respective holders.
1
1. OVERVIEW............................................................ 1
System requirements......................................... 1
2. PRECAUTIONS..................................................... 2
Before the installation ........................................ 2
Before connecting to a PC................................. 2
After the installation ........................................... 2
3. INSTALLING THE DRIVER .................................. 3
4. FOR YOUR REFERENCE..................................... 5
4-1 Terminal software setting ............................. 5
4-2 COM Port setting ......................................... 6
4-3 Uninstalling the driver .................................. 7
1. OVERVIEW
System requirements
The following hardware and software are required:
For the Icom
network devices
