Icom IC-RX7 Bedienungsanleitung

This device complies with Part 15 of the FCC Rules. Operation

is subject to the following two conditions: (1) this device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause

undesired operation.

WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CEL-

LULAR RADIOTELEPHONE SERVICE SIGNALS IS PROHIBITED

UNDER FCC RULES AND FEDERAL LAW.

INSTRUCTION MANUAL

New2001

iRX7

WIDEBAND RECEIVER

New2001 New2001

FOREWORD

Thank you for purchasing this Icom product. The IC-RX7

wideband receiver is designed and built with Icom’s superior

technology and craftsmanship. With proper care, this product

should provide you with years of trouble-free operation.

We want to take a couple of moments of your time to thank

you for making your IC-RX7 your radio of choice, and hope you

agree with Icom’s philosophy of “technology ﬁrst.” Many hours

of research and development went into the design of your

IC-RX7.

FEATURES

❍Covers 0.150–1300 MHz* wide frequency

range

* Some frequency bands are inhibited according to ver-

sion

❍Splash-resistance construction (IPX4)

Only when supplied antenna, battery pack and cap are

attached.

❍External power supply operation

❍1600 memory channels with 26 categories

are available

❍Optional PC programming

IMPORTANT

READ ALL INSTRUCTIONS carefully and completely

before using the receiver.

SAVE THIS INSTRUCTION MANUAL— This in-

struction manual contains important operating instructions

for the IC-RX7.

EXPLICIT DEFINITIONS

Versions of the IC-RX7 which display the “CE” symbol on

the serial number seal, comply with the essential require-

ments of the European Radio and Telecommunication Ter-

minal Directive 1999/5/EC, and that any applicable Essen-

tial Test Suite measurements have been performed.

WORD DEFINITION

RWARNING!

CAUTION

NOTE

Personal injury, fire hazard or electric

shock may occur.

Equipment damage may occur.

Recommended for optimum use. No risk of

personal injury, ﬁre or electric shock.

New2001

RWARNING! NEVER operate the receiver with an

earphone, headphones or other audio accessories at high

volume levels. Hearing experts advise against continuous

high volume operation. If you experience a ringing in your

ears, reduce the volume level or discontinue use.

RWARNING! NEVER operate the receiver while

driving a vehicle. Safe driving requires your full attention—

anything less may result in an accident.

RWARNING! NEVER connect the receiver directly

to an AC outlet. This may pose a ﬁre hazard or result in an

electric shock.

RWARNING! NEVER connect the receiver directly

to a power source of more than 6.9 V DC. This will ruin the

receiver.

RWARNING! NEVER connect the receiver to a

power source using reverse polarity. This will ruin the re-

ceiver.

DO NOT use or place the receiver in direct sunlight or

in areas with temperatures below –10°C (+14˚F) or above

+60°C (+140˚F).

Place the unit in a secure place to avoid inadvertent use by

children.

DO NOT use of chemical agents such as benzene or

alcohol when cleaning, as they can damage the receiver’s

surfaces.

NEVER expose the receiver to rain, snow or any liquids.

The receiver may be damaged.

NEVER operate or touch the receiver with wet hands.This

may result in an electric shock or damage the receiver.

Even when the receiver power is OFF, a slight current still

flows in the circuits. Remove the battery pack or batteries

from the receiver while not using it for a long time. Other-

wise, the installed battery pack or batteries will become ex-

hausted, and will need to be recharged or replaced.

RESPECT other people’s privacy. Information overheard

but not intended for you cannot lawfully be used in any way.

For U.S.A. only

CAUTION!: Changes or modifications to this device, not

expressly approved by Icom Inc., could void your authority to

operate this device under FCC regulations.

PRECAUTIONS

iii

New2001 New2001

FCC INFORMATION

• FOR CLASS B UNINTENTIONAL RADIATORS:

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of

the FCC Rules.These limits are designed to provide reason-

able protection against harmful interference in a residential

installation. This equipment generates, uses and can radi-

ate radio frequency energy and, if not installed and used

in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular in-

stallation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to

try to correct the interference by one or more of the following

measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and re-

ceiver.

• Connect the equipment into an outlet on a circuit differ-

ent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV techni-

cian for help.

SUPPLIED ACCESSORIES

The following accessories are supplied with the receiver.

qHand strap �� 1

wAntenna �� 1

eBelt clip ��1

rBattery pack* (BP-244) �� 1

tBattery charger* (BC-149A/D) �� 1

(The shape of the BC-149A and BC-149D are different.)

*Not supplied with some versions.

New2001

Icom, Icom Inc. and the logo are registered trademarks of Icom

Incorporated (Japan) in the United States, the United Kingdom,

Germany, France, Spain, Russia and/or other countries.

Microsoft, Windows and Windows Vista are either registered trade-

marks or trademarks of Microsoft Corporation in the United States

and/or other countries.

OPERATING THEORY

Electromagnetic radiation which has frequencies of

20,000 Hz (20 kHz*) and above is called radio frequency

(RF) energy because it is useful in radio transmissions. The

IC-RX7 receives RF energy from 0.150 MHz* to 1300 MHz

and converts it into audio frequency (AF) energy which in

turn actuates a loudspeaker to create sound waves. AF en-

ergy is in the range of 20 to 20,000 Hz.

*kHz is an abbreviation of kilohertz or 1000 hertz, MHz is abbrevia-

tion of megahertz or 1,000,000 hertz, where hertz is a unit of fre-

quency.

OPERATING NOTES

The IC-RX7 may receive its own oscillated frequency, result-

ing in no reception or only noise reception, on some fre-

quencies.

The IC-RX7 may receive interference from extremely strong

signals on different frequencies or when using an external

high-gain antenna.

New2001

FOREWORD��i

FEATURES��i

IMPORTANT��i

EXPLICIT DEFINITIONS��i

PRECAUTIONS�� ii

FCC INFORMATION �� iii

SUPPLIED ACCESSORIES�� iii

OPERATING THEORY�� iv

OPERATING NOTES��iv

TABLE OF CONTENTS ��v–vii

1 ACCESSORY ATTACHMENT·····················································1

■Antenna ��1

■Belt clip��1

■Hand strap��2

■Battery installation ��2

■Optional battery case��3

2 PANEL DESCRIPTION···························································4–9

■Front, top and side panels ��4

■Function display��7

3 BATTERY CHARGING ·······················································10–13

■Caution ��10

■Charging��12

■Battery information ��13

■External DC power operation��13

4 BASIC OPERATION ···························································14–19

■Power ON ��14

■Setting audio volume��14

■Setting squelch level��15

■Monitor function��15

■Operating mode selection��16

■Receiving mode selection��19

5 FREQUENCY SETTING ·····················································20–23

■Setting a frequency��20

■Setting a tuning step��23

6 SEARCH AND SCAN OPERATIONS·································24–46

■Search and scan types��24

■Full search ��26

■Basic search ��26

■Band search ��27

■Program search ��28

■Program link search��29

■Search edges programming ��30

■Program link programming ��32

■Auto write search ��34

■Skip search ��36

■Priority watch during search ��37

■Other SEARCH menu items ��38

■Link scan ��39

■All scan ��40

■Category scan ��40

■Group scan ��41

■Weather channel operation ��42

■Skip setting for scanning��44

■Priority watch during scan ��45

■Other SCAN menu items��46

7 MEMORY PROGRAMMING ·················································47–56

■General description��47

TABLE OF CONTENTS

vii

New2001

■Memory channel programming��48

■Selecting a memory channel ��53

■Copying memory contents��54

■Memory clearing��56

8 MENU SCREEN OPERATION··············································57–70

■General ��57

■Menu list ��58

■MODE/TS/TONE set items��60

DDuplex direction (DUPLEX)��60

DOffset frequency (OFFSET FREQ)��60

DTuning step (TS) ��61

DReceiving mode (MODE)��61

DTone squelch/DTCS squelch setting (TONE)��62

DTone squelch frequency (TSQL FREQ)��62

DDTCS code (DTCS CODE)��63

DDTCS polarity (DTCS POLARITY) ��63

DVoice squelch control (VSC)��63

■SETTING menu items��64

DAM antenna selection (AM ANTENNA)��64

DFM antenna selection (FM ANTENNA)��64

DRF gain (RF GAIN)��65

DAuto power OFF (AUTO POWER OFF)��65

DAuto power ON (AUTO POWER ON) ��65

DPower save (POWER SAVE)��65

DDial acceleration (DIAL SPEED-UP) ��66

DKey lock type (LOCK) ��66

DCI-V setting (CI-V SET) ��67

•CI-V address (ADDRESS)��67

•CI-V baud rate (BAUD RATE)��67

•CI-V transeive (TRANSCEIVE) ��67

■SOUNDS menu items��68

DKey-touch beep (KEY-TOUCH BEEP) ��68

DBeep output level (BEEP LEVEL)��68

DAF ﬁlter (AF FILTER) ��68

DTone control (TONE CONTROL) ��69

•Bass level (BASS) ��69

•Treble level (TREBLE)��69

■DISPLAY menu items��70

DDisplay backlighting (BACKLIGHT) ��70

DLCD contrast (LCD CONTRAST) ��70

DOpening logo (OPENING LOGO)��70

DFont size (FONT SIZE)��70

9 OTHER FUNCTIONS····························································71–85

■Antenna selection��71

■RF gain��72

■Attenuator function��73

■Lock function��73

■Duplex operation��74

■[DIAL] function assignment��75

■Tone/DTCS squelch operation��76

■Tone squelch frequency/DTCS code setting ��78

■DTCS polarity ��79

■Tone search ��80

■Beep tones��81

■Dial speed acceleration ��81

■Power save ��81

■Auto power OFF��82

■Auto power ON ��82

■Display backlighting��82

■Font size ��82

TABLE OF CONTENTS

viii

New2001

■LCD contrast��83

■Voice squelch control��83

■Cloning function��84

■Resetting��85

10 CONTROL COMMAND·······················································86–87

■General ��86

■Data format��86

■Command table ��86

11TROUBLESHOOTING·······························································88

12 SPECIFICATIONS·····································································89

13 OPTIONS ··················································································90

14 CE ·····················································································91–92

INDEX ·····················································································93–95

TABLE OF CONTENTS

ACCESSORY ATTACHMENT

■Antenna

Insert the supplied antenna into the antenna connector and

screw down the antenna as shown below.

NEVER carry the receiver by hold-

ing the antenna.

✔For your information

Third-party antennas may increase receiver performance.

An optional AD-92SMA antenna connector adapter is

available to connect an antenna with a BNC connector.

■Belt clip

Slide the supplied belt clip on the receiver’s rear panel until it

clicks into place.

Belt clip

Pull this lever when

dettached

Antenna

1ACCESSORY ATTACHMENT

New2001 New2001

■Hand strap

Slide the hand strap

through the loop on the

right top of the receiver

as illustrated at right to

facilitate carrying the

receiver.

Keep the jack cover attached when jacks are not in use to

avoid bad contacts from dust and moisture.

■Battery installation

Install the Li-Ion battery pack (BP-244) or optional battery

case (BP-262) as illustrated below.

qRemove the battery cover from the receiver.

Latch

wInstall the Li-Ion battery pack (BP-244).

• Be sure to observe the correct direction.

• Charge the Li-Ion battery pack before use. (p.12)

Facing up this side

Handstrap

Andere Handbücher für IC-RX7

Inhaltsverzeichnis

Andere Icom Empfänger Handbücher

Icom

Icom IC-R100 Bedienungsanleitung

Icom

Icom IC-R5 Bedienungsanleitung

Icom

Icom IC-R75 Bedienungsanleitung

Icom

Icom IC-R8600 Administratorhandbuch

Icom

Icom IC-R9000L Bedienungsanleitung

Icom

Icom IC-R75 Bedienungsanleitung

Icom

Icom IC-RX7 Bedienungsanleitung

Icom

Icom IP501H Bedienungsanleitung

Icom

Icom IC-R71A Bedienungsanleitung

Icom

Icom IC-R2 Bedienungsanleitung

Icom

Icom IP501M Bedienungsanleitung

Icom

Icom IC-R7100 Bedienungsanleitung

Icom

Icom IC-RP1510 Bedienungsanleitung

Icom

Icom IC-R10 Bedienungsanleitung

Icom

Icom IC-R2500 Bedienungsanleitung

Icom

Icom iC- r8500 Bedienungsanleitung

Icom

Icom IC-R72 Bedienungsanleitung

Icom

Icom IC-R7100 Bedienungsanleitung

Icom

Icom IC-R100 Bedienungsanleitung

Icom

Icom IC-R75 Bedienungsanleitung

Icom

Icom IP501M Bedienungsanleitung

Icom

Icom IC-R20 Bedienungsanleitung

Icom

Icom IC-R1 Bedienungsanleitung

Icom

Icom IC-R2 Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung