Icom IC-4088A Bedienungsanleitung

INSTRUCTION MANUAL

FRS UHF FM TRANSCEIVER

i4088A

This device complies with Part 15 of the FCC rules. Oper-

ation is subject to the following two conditions: (1) This de-

vice may not cause harmful interference, and (2) this

device must accept any interference received, including in-

terference that may cause undesired operation.

IC-4088A_2.qxd 03.6.23 11:58 Page A (1,1)

FOREWORD

Thank you for purchasing the IC-4088A FRS FM transceiver.

This FRS (Family Radio Service) FM transceiver meets the FCC

regulation (FCC Part 95). This transceiver is designed for those

who require top-grade quality, performance and outstanding re-

liability under the most demanding conditions.

FEATURES

❍

Free of user-license and applications

❍

Voice scrambler function for communication

privacy

❍

External DC-IN jack for both operation and

battery charging

(Optional BC-149A or CP-18A is required)

❍

All 14 FRS channels are available

❍

Powerful 500 mW (ERP) high output power

❍

38 convenient group channels

■ATS (Automatic Transponder System)

This convenient function automatically checks station availability

within the operating range, and alerts you via function display in-

dication. (p. 20)

In addition, a manual transponder is also available for “GROUP

MODE” operation to check availability of stations in a speciﬁed

group within the operating range. In this case, the transceiver

alerts you via beeps. (p. 12)

IC-4088A_2.qxd 03.6.23 11:58 Page i (1,1)

■WATER-RESISTANT* CONSTRUCTION

Water-resistant* construction is employed, and this unit can be

used in a wide range of applications.

*Meets JIS water-protection speciﬁcation grade 4.

■GROUP MODE (BUILT-IN CTCSS: Continuous Tone

Coded Squelch System)

CTCSS encoder/decoder are standard, providing quiet stand-by.

Audio (voice) signals are output only when a signal with matched

CTCSS tone signal is received. This is very helpful for group

communications. In addition, 38 different CTCSS frequencies

are available. (p. 12)

■2 types of “Ring” function

The “Smart-Ring” function and the “Call-Ring” function are avail-

able for smart and simple station calls providing a telephone-

style ring when called. 10 different ringing tones are available.

(p. 18)

SUPPLIED ACCESSORY

• Belt clip ………………………………… 1

Icom, Icom Inc. and the are registered trademarks of Icom Incor-

porated (Japan) in the United States, the United Kingdom, Germany,

France, Spain, Russia and/or other countries.

IC-4088A_2.qxd 03.6.23 11:58 Page ii (1,1)

iii

IMPORTANT

READ ALL INSTRUCTIONS carefully and completely before

using the transceiver.

SAVE THIS INSTRUCTION MANUAL— This instruction man-

ual contains important operating instructions for the transceiver.

PRECAUTION

RDANGER! NEVER operate the transceiver near un-

shielded electrical blasting caps or in an explosive atmosphere.

RWARNING! NEVER hold the transceiver so that the

antenna is very close to, or touching exposed parts of the body,

especially the face or eyes, while transmitting. The transceiver

will perform best if the microphone is 2 to 4 in. (5 to 10 cm)

away and the transceiver is vertical.

RWARNING! NEVER operate the transceiver with a

headset or other audio accessories at high volume levels. Hear-

ing experts advise against continuous high volume operation. If

you experience a ringing in your ears, reduce the volume or dis-

continue use.

NEVER attempt to charge alkaline cell batteries. Be aware

that external DC power connections will charge batteries inside

the battery case. This will damage not only the battery case but

also the transceiver.

DO NOT push the PTT when not actually desiring to trans-

mit.

IC-4088A_2.qxd 03.6.23 11:58 Page iii (1,1)

PRECAUTION— continued

USE the optional AC adapter or cigarette lighter cable only for

both operating the transceiver and charging the battery. Other

manufacturer’s AC adapter, cigarette lighter cable or DC power

cable with external power supply may damage the transceiver.

Place the unit in a secure place to avoid inadvertent use by chil-

dren.

AVOID using or placing the transceiver in direct sunlight or in

areas with temperatures below –4˚F (–20°C) or above +122˚F

(+50°C).

The use of non-Icom battery packs/chargers may impair trans-

ceiver performance and invalidate the warranty.

Even when the transceiver power is OFF, a slight current still

flows in the radio. Remove the alkaline cells or battery pack

from the transceiver when not using it for a long time. Other-

wise, the installed batteries will become exhausted.

FCC WARNING: NEVER open the transceiver’s case to make

any internal adjustments, changes or modiﬁcations by a person

who not expressly approved by Icom Inc., could void your au-

thority to operate this transceiver under FCC regulations.

Any transceiver’s adjustments, replacement must be made by a

qualiﬁed technician using the proper test equipment.

IC-4088A_2.qxd 03.6.23 11:58 Page iv (1,1)

TABLE OF CONTENTS

FOREWORD …………………………………………………………………… i

SUPPLIED ACCESSORY……………………………………………………… ii

IMPORTANT …………………………………………………………………… iii

PRECAUTION ……………………………………………………………… iii–iv

TABLE OF CONTENTS ……………………………………………………… v

1 PREPARATION …………………………………………………………… 1

■Belt clip attachment ……………………………………………………… 1

■Battery installation ……………………………………………………… 1

2 PANEL DESCRIPTION ………………………………………………… 2–4

■Switches, controls, keys and connectors ……………………………… 2

■Function display ………………………………………………………… 4

3 BATTERY CHARGING ………………………………………………… 5–7

■Battery caution …………………………………………………………… 5

■Charging connections …………………………………………………… 6

4 BASIC OPERATION …………………………………………………… 8–9

■Power ON ………………………………………………………………… 8

■Adjusting the volume …………………………………………………… 8

■Selecting the operating channel………………………………………… 9

5 RECEIVE AND TRANSMIT ………………………………………… 10–11

6 GROUP MODE (CTCSS) …………………………………………… 12–13

■Setting the group code ………………………………………………… 12

7 SCAN FUNCTION ………………………………………………………… 14

8 RING FUNCTIONS ……………………………………………………… 15

■Smart-Ring ……………………………………………………………… 15

■Call-Ring ………………………………………………………………… 15

9 OTHER FUNCTIONS ………………………………………………… 16–21

■Voice scrambler function ……………………………………………… 16

■Initial set mode ………………………………………………………… 16

■Lock function …………………………………………………………… 19

■Low battery indicator …………………………………………………… 19

■Auto power save………………………………………………………… 19

■ATS (Automatic Transponder System) ……………………………… 20

■Resetting the transceiver ……………………………………………… 20

■Optional HM-75A functions …………………………………………… 21

10 SPECIFICATIONS …………………………………………………… 22–23

11 OPTIONS ………………………………………………………………… 24

12 MEMO ……………………………………………………………………… 25

IC-4088A_2.qxd 03.6.23 11:58 Page v (1,1)

PREPARATION

■Belt clip attachment

Attach the belt clip using the

supplied screw. Conveniently

attaches to a belt.

■Battery installation

Install 3 R6 (AA) size alkaline cell batteries or the optional BP-202

BATTERY PACK

as illustrated below.

qRemove the battery case

cover from the transceiver.

wInstall 3×R6 (AA) size alka-

line cell batteries or BP-

202.

• Be sure to observe the cor-

rect polarity.

NOTE: Keep battery contacts clean. It’s good idea to clean bat-

tery terminals once a week.

Alkaline cells

BP-202

IC-4088A_2.qxd 03.6.23 11:58 Page 1 (1,1)

2PANEL DESCRIPTION

■Switches, controls, keys and

connectors

Antenna

Function

display

(p. 4)

Speaker

Microphone

IC-4088A_2.qxd 03.6.23 11:58 Page 2 (1,1)

PANEL DESCRIPTION

qEXTERNAL SPEAKER AND MICROPHONE JACKS

Connect an optional speaker-microphone or headset, if desired.

wVOLUME CONTROL [VOL]

Rotate clockwise to increase and counterclockwise to decrease

volume.

ePTT SWITCH [PTT]

Push and hold to transmit; release to receive.

rMODE SWITCH [MODE]

➥Push to enter and select set mode for group (p. 12) and voice

scrambler code. (p. 16)

➥Push and hold for 1 sec. to turn the monitor function ON and

OFF. (p. 8)

tCHANNEL UP SWITCH [Y]

➥Push to increment the operating channel.

➥Push and hold to increment the operating channel continu-

ously.

➥While scanning, changes scanning direction. (p. 14)

yCHANNEL DOWN SWITCH [Z]

➥Push to decrement the operating channel.

➥Push and hold to decrement the operating channel continu-

ously.

➥While scanning, changes scanning direction. (p. 14)

uPOWER SWITCH [PWR]

➥Push to turn the power ON.

➥Push and hold this key to toggle the key lock function

ON/OFF. (p. 19)

iEXTERNAL DC IN JACK [DC 6V] (p. 6)

Connects the optional AC adapter or cigarette lighter cable for

both operation and battery charging.

IC-4088A_2.qxd 03.6.23 11:58 Page 3 (1,1)

2PANEL DESCRIPTION

■Function display

qKEY LOCK INDICATOR

Appears during the key lock function ON.

wBUSY INDICATOR

Appears while receiving a signal or when the squelch is open.

eVOICE SCRAMBLER INDICATOR

Appears while the voice scrambler function is in use.

rAUTO POWER OFF INDICATOR

Appears while the auto power off function is ON.

tLOW BATTERY INDICATOR

Appears or blinks when the battery decreases to a specified

level.

yGROUP NUMBER INDICATOR

Indicates the selected group number during the group function ON.

uCHANNEL NUMBER INDICATOR

Indicates the selected operating channel number.

iPOWER ON INDICATOR

Appears while the power is ON.

oANSWER BACK INDICATOR

➥Appears when you and your group are in the conversation

area.

➥Blinks when you or your group is out of the conversation area.

!0 TRANSMIT INDICATOR

Appears during PTT ON.

qewrt

yuio

IC-4088A_2.qxd 03.6.23 11:58 Page 4 (1,1)

Andere Handbücher für IC-4088A

Inhaltsverzeichnis

Andere Icom Transceiver Handbücher

Icom

Icom IC-705 Installationsanleitung

Icom

Icom IC-F80DT Montage- und Bedienungsanleitung

Icom

Icom IC-GM800 Bedienungsanleitung

Icom

Icom IC-F3100D series Bedienungsanleitung

Icom

Icom IC-4008A Bedienungsanleitung

Icom

Icom IC-12GAT Bedienungsanleitung

Icom

Icom IC-7800 Bedienungsanleitung

Icom

Icom IC-F3062T Bedienungsanleitung

Icom

Icom IC-820H Bedienungsanleitung

Icom

Icom IC-M504 Bedienungsanleitung

Icom

Icom IC-12GE Bedienungsanleitung

Icom

Icom ID-5100A Bedienungsanleitung

Icom

Icom IC-V68 Bedienungsanleitung

Icom

Icom IC-F3161DT Bedienungsanleitung

Icom

Icom IC-735 Bedienungsanleitung

Icom

Icom IC-718 Bedienungsanleitung

Icom

Icom IC-F4062S Bedienungsanleitung

Icom

Icom IC-M602 Bedienungsanleitung

Icom

Icom IC-1200A Bedienungsanleitung

Icom

Icom ID-52A Bedienungsanleitung

Icom

Icom IC-706 Bedienungsanleitung

Icom

Icom IC-2725E Bedienungsanleitung

Icom

Icom IC-M411 Bedienungsanleitung

Icom

Icom IC-M88 Bedienungsanleitung

Beliebte Transceiver Handbücher anderer Marken

Yaesu

Yaesu FT-7B Bedienungsanleitung

Kenwood

Kenwood ProTalk TK-3201 Bedienungsanleitung

Texas Instruments

Texas Instruments TLK10232 Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Kenwood

Kenwood TK-3180 Bedienungs- und Wartungshandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Kenwood

Kenwood TK-2217 Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Kenwood

Kenwood TS-590SG Bedienungsanleitung

Midland

Midland G8E-BT Handbuch

ComNav

ComNav Mariner X2 Bedienungsanleitung