4
Section 2PROGRAMMABLE KEY FUNCTIONS
If you use the CS-F29SR2 programming software
(purchase separately), you can assign the functions
described below to [TOP], [Upper], and [Lower].
ZONE
zPush to select a desired Zone.
zHold down for 1 second to announce the current
Zone number.
LThe Zone number is announced when selecting a
Zone, regardless of the Channel Announce setting.
SCAN START/STOP
Push to start and stop a scan.
LWhen a scan is started with the Power ON Scan or
Automatic Scan function, push this key to pause it. The
paused scan resumes after a preset period of time.
PRIORITY A CHANNEL, PRIORITY B CHANNEL
Push to select the Priority A or Priority B channel.
PRIORITY A CHANNEL (REWRITE),
PRIORITY B CHANNEL (REWRITE)
zPush to select the Priority A or Priority B channel.
zHold down for 1 second to set the operating
channel as the Priority A or Priority B channel.
MEMORY CHANNEL 1, MEMORY CHANNEL 2
MEMORY CHANNEL 3, MEMORY CHANNEL 4
Push to select Memory channel 1, 2, 3, or 4.
MONI
zPush to turn the CTCSS (DTCS) mute ON or OFF.
zWhile holding down this key, the transceiver opens
any squelch, or releases any mute.
LOCK
Hold down for 1 second to turn the Key Lock function
ON or OFF.
LEven if the function is ON, [MONI] and [SURVEILLANCE]
are not locked.
SURVEILLANCE
zHold down for 1 second to turn ON the Surveillance
function.
zPush to turn OFF the function.
LWhen the function is ON and a signal is received, a
beep does not sound and the status indicator does not
light, even if you push any key.
SIREN
Hold down for 2 seconds to emit a siren sound.
LThe siren continues to sound until turning OFF the
transceiver.
LThis function is for situations other than an emergency
alert, such as a security alarm.
SCRAMBLER
zHold down for 1 second to turn ON the Voice
Scrambler function.
zPush to turn OFF the function.
COMPANDER
zHold down for 1 second to turn ON the Compander
function.
zPush to turn OFF the function.
LThe Compander function reduces noise components
from the transmitted audio to provide clear
communication.
S-RING/C-RING
zPush to make a Smart-Ring call.
zHold down for 1 second to make a Call-Ring call.
ANNOUNCE
Push to turn the Channel Announce function ON or OFF.
LThe transceiver announces the position of
[Rotary Selector].
LWhen the Beep function is OFF, the operating channel is
not announced, regardless of this setting. (p. 6)
ZONE/ANNOUNCE
zPush to select a desired Zone.
zHold down for 1 second to turn the Channel
Announce function ON or OFF.
LThe Zone number is announced when selecting a
Zone, regardless of the Channel Announce setting.
[TOP]
[Lower]
[Upper]
Programmable key functions
NOTE: Refer to the instruction manual that comes
with the transceiver for the default settings of these
keys.
