Icom IC-F7010 Series Bedienungsanleitung

iF7010 series

INDEX

14 OPTIONS

13 OTHERS

12 USER SETTINGS

11 Bluetooth®OPERATION

10 VOICE RECORDER FUNCTIONS

9 ABOUT THE microSD CARD

8 MDC 1200 SYSTEM OPERATION

7 APCO P25 MODE OPERATION

6 MENU SCREEN

5 SCAN OPERATION

4 ADVANCED OPERATION

3 BASIC OPERATION

2 PANEL DESCRIPTION

1 ACCESSORIES

INTRODUCTION

VHF P25 TRANSCEIVERS

OPERATING GUIDE

iF7510 series

iF7020series

UHF P25 TRANSCEIVERS

iF7040series

iF7520 series

iF7540

series

INTRODUCTION

Thank you for choosing this Icom product.

This product is designed and built with Icom’s state

of the art technology and craftsmanship. With proper

care, this product should provide you with years of

trouble-free operation.

IMPORTANT

FIRST, CAREFULLY READ PRECAUTIONS

AND INSTRUCTIONS that are provided with the

transceiver.

SAVE THIS OPERATING GUIDE— This operating

guide contains additional important operating

instructions for the following transceivers.

Portable

• IC-F7010S/IC-F7020S/IC-F7040S:

Simple key type transceivers

• IC-F7010T/IC-F7020T/IC-F7040T:

Ten-key type transceivers

Mobile

• IC-F7510/IC-F7520/IC-F7540

Icom, Icom Inc. and Icom logo are registered trademarks of

Icom Incorporated (Japan) in Japan, the United States, the

United Kingdom, Germany, France, Spain, Russia, Australia,

New Zealand, and/or other countries.

AQUAQUAKE is a trademark of Icom Incorporated.

The Bluetooth®word mark and logos are registered

trademarks owned by the Bluetooth SIG, Inc. and any use of

such marks by Icom Inc. is under license.

Other trademarks and trade names are those of their

respective owners.

All other products or brands are registered trademarks or

trademarks of their respective holders.

Icom is not responsible for the destruction, damage to, or

performance of any Icom or non-Icom equipment, if the

malfunction is because of:

• Force majeure, including, but not limited to, res,

earthquakes, storms, oods, lightning, other natural

disasters, disturbances, riots, war, or radioactive

contamination.

• The use of Icom transceivers with any equipment that is

not manufactured or approved by Icom.

1-1

Section 1ACCESSORIES

Supplied accessories.............................................................. 1-2

Attaching accessories............................................................. 1-3

DFlexible antenna (Portable)............................................. 1-3

DBattery pack (Portable)................................................... 1-3

DBelt clip (Portable) .......................................................... 1-4

DConnector cover (Portable)............................................. 1-5

DMounting bracket (Mobile).............................................. 1-6

1ACCESSORIES

1-2

Supplied accessories

The following accessories are supplied.

Battery pack Belt clip Connector cover

(with a screw)

NOTE: Some accessories are not supplied, or the

shape is different, depending on the transceiver

version.

zPortable type transceiver

zMobile type transceiver

Microphone Microphone hanger

and screw set

DC power cableMounting bracket

Flat washers Spring washers

Bracket bolts Mounting screws

(M5×12) Self-tapping screws

(M5×16)

Nuts

1ACCESSORIES

1-3

Attaching accessories

DFlexible antenna (Portable)

Connect the antenna to the antenna connector.

DBattery pack (Portable)

CAUTION: DO NOT attach or detach the battery

pack when the transceiver is wet or soiled. This may

result in water or dust getting into the transceiver/

battery pack and may damage the transceiver.

To attach:

1. Slide the battery pack in the direction of the arrow.

(q)

2. Push the battery pack until the battery sliding

locks make a ‘click’ sound. (w)

To detach:

1. Push both battery sliding locks in the direction of

the arrow. (z)

• The battery pack is then released.

2. Lift up to detach the battery pack. (x)

NOTE: Keep the battery pack terminals clean. It’s a

good idea to occasionally clean them.

CAUTION:

• DO NOT carry the transceiver by holding only the

antenna.

• DO NOT connect an antenna other than those

listed in the INSTRUCTIONS.

• Transmitting without an antenna may damage the

transceiver.

Battery sliding locks

Battery pack

To attach

To detach

1ACCESSORIES

1-4

Accessory attachments (Continued)

DBelt clip (Portable)

To attach:

1. Remove the battery pack from the transceiver, if it

is attached.

2. Slide the belt clip in the direction of the arrow until

the belt clip is locked and makes a ‘click’ sound.

Belt clip

BE CAREFUL! DO NOT break your ngernail.

To detach:

Lift the tab up (q), and slide the belt clip in the

direction of the arrow (w).

1ACCESSORIES

1-5

Accessory attachments (Continued)

To attach:

1. Attach the connector cover over the multi-

connector. (q)

2. Tighten the screw. (w)

Multi-

connector

Connector

cover

DConnector cover (Portable)

To detach:

1. Remove the screw. (z)

2. Detach the connector cover, and then connect an

optional equipment. (x)

CAUTION: DO NOT detach the connector cover

when an optional equipment is not in use. Otherwise

the terminals of the multi-connector may be shorted

by a metal object, or become rusty by water

intrusion. This could damage the transceiver.

1ACCESSORIES

1-6

Accessory attachments (Continued)

DMounting bracket (Mobile)

Install the mounting bracket in a place where it can be

rmly attached.

LWe recommend that you periodically check whether

the screws are loose or not, especially after a long

period of use.

Bolt

Mounting screw

Spring washer

Flat washer

Nut

When using the

self-tapping screws

CAUTION: DO NOT use bolts other than the

ones that are supplied with the mounting bracket.

Bolt longer than 8 mm (0.31 in) may damage the

transceiver’s internal units.

2-1

Section 2PANEL DESCRIPTION

Front, top and side panels (for the Portable type transceiver) 2-2

DAbout the transceiver types............................................ 2-2

DAbout the Status indicator............................................... 2-2

DAbout the Multi-connector............................................... 2-2

DAbout the Software key functions................................... 2-2

Function display (for the Portable type transceiver)............... 2-3

DIcon Area......................................................................... 2-3

DText Area......................................................................... 2-4

DKey Display Area ............................................................ 2-4

Front, top and side panels (for the Mobile type transceiver) .. 2-5

DAbout the Status indicator............................................... 2-5

DAbout the Microphone connector.................................... 2-5

DAbout the Software key functions................................... 2-5

Rear panel (for the Mobile type transceiver) .......................... 2-6

Function display (for the Mobile type transceiver).................. 2-7

DIcon Area......................................................................... 2-7

DText Area......................................................................... 2-8

DKey Display Area ............................................................ 2-8

Status indicator....................................................................... 2-9

Assignable keys, keypads, and AB Switch............................2-11

DPortable type..................................................................2-11

DMobile type ....................................................................2-11

Assignable Software key functions....................................... 2-12

DFor keys and keypads................................................... 2-12

DFor the AB Switch (For the Portable type transceiver) .....2-20

2PANEL DESCRIPTION

2-2

Front, top and side panels (for the Portable type transceiver)

[Emer]

[P1]

[P2]

[Selector]

[VOL]

[Back]

[PTT]

Status

indicator

Microphone

Function

Display

Ten-Key

Pad

[F2]

[F3]

microSD

Card Slot

Micro USB

Connector

Antenna

Connector

Multi-

connector

[F1]

Speaker

DAbout the transceiver types

There are 2 types of transceivers.

IC-F7010S, IC-F7020S, IC-F7040S: Simple key types

IC-F7010T, IC-F7020T, IC-F7040T: Ten-key types

DAbout the Status indicator

• Lights white, then blinks red, yellow, and green when

turning ON the transceiver.

• Lights red while transmitting.

• Lights green while receiving a signal, or when the

squelch is open.

• Blinks magenta when the battery is exhausted.

DAbout the Multi-connector

Connects to an optional speaker microphone or

headset.

CAUTION: DO NOT use the transceiver without the

connector cover or optional device attached.

The transceiver meets IP68 requirements for dust-

tight and waterproof protection only when the

connector cover or the optional device is attached.

DAbout the Software key functions

NOTE: Dealers can assign the Software key

functions to the keys, keypads, and the AB Switch.

LSee page 2-11 for details.

AB Switch

[Up]/[Down]

[Right]/[Left]

[OK]

The illustration is of the Ten-key types.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Icom Transceiver Handbücher

Icom

Icom IC-V8 Bedienungsanleitung

Icom

Icom IC-F5020 Series Bedienungsanleitung

Icom

Icom IC-F52D Bedienungsanleitung

Icom

Icom IC-32A Bedienungsanleitung

Icom

Icom IC-F3162D series Bedienungsanleitung

Icom

Icom ic-f1000d series Bedienungsanleitung

Icom

Icom IC-V100 Bedienungsanleitung

Icom

Icom IC-W2A Bedienungsanleitung

Icom

Icom IC-A2 Bedienungsanleitung

Icom

Icom IC-706MKIIG Bedienungsanleitung

Icom

Icom IC-M802 Bedienungsanleitung

Icom

Icom iDAS IC-F3103D Bedienungsanleitung

Icom

Icom IC-M801GMDSS Bedienungsanleitung

Icom

Icom UltraTech IC-F4GT-4 Bedienungsanleitung

Icom

Icom IC-281H Bedienungsanleitung

Icom

Icom IC-Z1A Bedienungsanleitung

Icom

Icom IC-A14 Bedienungsanleitung

Icom

Icom iM87 Bedienungsanleitung

Icom

Icom IC-7200 Einrichtungshandbuch

Icom

Icom IC-2GXAT Bedienungsanleitung

Icom

Icom IC-2350H Bedienungsanleitung

Icom

Icom IC-F4021T Bedienungsanleitung

Icom

Icom IC-4SAT Bedienungsanleitung

Icom

Icom IC-9100 Bedienungsanleitung

Beliebte Transceiver Handbücher anderer Marken

Yaesu

Yaesu FT-7B Bedienungsanleitung

Kenwood

Kenwood ProTalk TK-3201 Bedienungsanleitung

Texas Instruments

Texas Instruments TLK10232 Bedienungsanleitung

Mizuho

Mizuho MX-2 Produkthandbuch

Kenwood

Kenwood TK-3180 Bedienungs- und Wartungshandbuch

Blitz

Blitz MJ-398U Bedienungsanleitung

Utilicom

Utilicom LongRanger 2050 Bedienungsanleitung

Standart

Standart HX290UKA Bedienungsanleitung

Altronix

Altronix Pace1PTM Bedienungsanleitung

Kirisun

Kirisun PT2208 Bedienungsanleitung

ELECRAFT

ELECRAFT KX2 Bedienungsanleitung

Zodiac

Zodiac K3 Bedienungsanleitung

Assa Abloy

Assa Abloy SecureComm HKC GSM-WIFI U Bedienungsanleitung

Kenwood

Kenwood TK-2217 Bedienungsanleitung

Siemens

Siemens PSO 4000 Bedienungsanleitung

Kenwood

Kenwood TS-590SG Bedienungsanleitung

Midland

Midland G8E-BT Handbuch

ComNav

ComNav Mariner X2 Bedienungsanleitung