ICP DAS USA M2M-711D Einrichtungshandbuch
M2M-711D Quick Start (Version 2.20 Mar/2012)
PAGE: 1
M2M-711D Quick Start User Guide
The package includes the following items:
˙One M2M-711D hardware module
˙One quick start guide
˙One Software CD
˙OneWi-Fi Antenna (ANT-124-05)
˙One RS-232 cable (CA-0910)
1. Introduction
The major purpose of this Guide is to help users become familiar with M2M-711D
module quickly. If you want to realize the detail items please refer to user manual.
(CD:\napdos\multimedia\M2M-711D\manual\M2M-711Duser manual.pdf)
M2M-711D provides 2 major technologies on networking:
(1)VxServer mode(Wi-Fi): This connection method needs a Wi-Fi AP (Access Point)
in the working field. M2M-711D connects to Internet via Wi-Fi AP, and then
establishes connection with VxServer Software on PC. The architecture is shown
below:
M2M-711D Quick Start (Version 2.20 Mar/2012)
PAGE: 2
(2)Pair-Connection: This communication mode takes two M2M-711D modules,
one
works as an Ethernet Server; the other works as a Client, and use two computers to
test and operate the M2M-711D modules. The architecture is shown below:
2. Device Assignment
Appearance
Pin Assignment
Pin Name Description
1 CTS1 Clear to Send
2 RTS1 Request to Send
M2M-711D Quick Start (Version 2.20 Mar/2012)
PAGE: 3
Pin Name Description
3 RxD1 Receive Data
4 TxD1 Transmit Data
5 INIT InitPin
6 DATA+ Data+ of RS-485
7 DATA- Data- of RS-485
8 Vs Vs of Power Supply
9 GND GND of Power Supply
7 Segment LED Display
VxServer mode
State Process Description
ON
Connection Mode
Ethernet mode、AP mode、Ad Hoc mode
11111 Shows the local IP or DHCP sequentially
22222 Shows the VxServer IP sequentially
33333 Shows the connecting port.
44444 Shows the current setting of Com port
IP In AP mode or Ad Hoc mode, it shows the
web
setting IP.
Connect
connecting It shows twinkled “Conn.”.
Show AP Signal
It shows the current signal strength of Wi-
Fi AP
Device in the AP mode.
Serial
Pair-Connection
Interactive display Comport signals.
Pair-Connection Server Mode
State Process Description
ON
Connection Mode
Ethernet Server、Wi-Fi Server、Ad Hoc Server
11111 Shows the local IP or DHCP sequentially
22222 Shows the Monitor’s port of server.
33333 Shows the current setting of Com port.
IP In Wireless mode, it shows the web setting IP.
M2M-711D Quick Start (Version 2.20 Mar/2012)
PAGE: 4
State Process Description
Connect
Monitor State Shows -LIS-
AP Signal
Strength It shows the current signal strength of Wi-
Fi AP
Device in the AP mode.
Serial
Pair-Connection
Interactive display Comport signals.
Pair-Connection Client Mode
Stat Process Description
ON
Connection Mode
Ethernet Client、Wi-Fi Client、Ad Hoc Client
11111 Shows the local IP or DHCP sequentially
22222 Shows Server IP
33333 Shows the Monitor’s port of server.
44444 Shows the current setting of Com port.
IP In Wireless mode, it shows the web setting IP.
Connect
Connecting It shows twinkled “Conn.”.
AP Signal It shows the current signal strength of Wi-
Fi AP
Device in the AP mode.
Login State Shows “Conn.”
Serial
Pair-Connection
Interactive display Comport signals.
3. System Setting
The M2M-711D module is built-in web server, the user can configure and operate the
M2M-711D by web browser (ex: IE).
Note: Users must enter M2M-711D web server by Ethernet in the setting.
Connection Setting
First, connect the M2M-711D with PC by RF-45 as shown below:
M2M-711D Quick Start (Version 2.20 Mar/2012)
PAGE: 5
Ethernet default value is 192.168.1.217. The PC and M2M-711D have to set
setting in the same network segment. The example of connection setting will
be described below and Microsoft Windows XP Professional SP2 is used.
The setting of PC:
Open the dialogue window of IP to set the IP and subnet mask. The default
Ethernet IP of M2M-711D is 192.168.1.217. Users must assign the same
network segment setting but NOT the same IP (EX: 192.168.1.220).
Step1: Click “startSettingsNetworkConnections”
Step2:
Click “contents” in the dialogue window.
Step3:
Click Internet Protocol (TCP/IP) and then click the contents
Step4: Set the IP and subnet mask.
M2M-711D Quick Start (Version 2.20 Mar/2012)
PAGE: 6
M2M-711D Quick Start (Version 2.20 Mar/2012)
PAGE: 7
Communication Test: Click“startRun...”Key in “cmd” and then
click “OK”Key in “ping 192.168.1.217”
If the network settings are correct, it will show:
M2M-711D Quick Start (Version 2.20 Mar/2012)
PAGE: 8
After entering M2M-711D, the system divided into two applications:
VxServer mode:
The PC must install VxServer Software and VxComm Driver in VxServer
mode:
Step1:
VxComm Driver Installation
Download VxComm Driver:
http://ftp.icpdas.com/pub/cd/8000cd/napdos/driver/vxcomm_driver/
Please select the most suitable for your Windows and download the latest
version. And then, run the installer.
"VxComm2K_v2.11.05_setup.exe" for Windows NT4.0, 2000 /XP/2003
and Vista32 (32-bit)
"VxComm98.exe" for Windows 95/98/ME
M2M-711D Quick Start (Version 2.20 Mar/2012)
PAGE: 9
Step2: VxServer Software Installation
VxServer Software download link:
http://ftp.icpdas.com/pub/cd/usbcd/napdos/vxserver/software/
VxServer user manual:
http://ftp.icpdas.com/pub/cd/usbcd/napdos/vxserver/manual/
Step3: Set VxServer Mode
Open web browser (EX: IE) and key in http://192.168.1.217 and then click
Enter to enter Web Config. Key in User name (Default setting: root) and
Password (Default setting: icpdas) click “Enter”
M2M-711D Quick Start (Version 2.20 Mar/2012)
PAGE: 10
Settings in the Standard Config:
(1)Operation Mode: VxServer mode
(2)Server IP: The IP of PC
(3)Communcation Port: 11000
Others keep the default setting, and then click “Save Setting”.
Settings in the Wireless Config:
(1)Wireless Mode: AP mode
(2)SSID, Channel, Encryption and Passphrase are the same with the
working field Wi-Fi AP.
Others keep the default setting, and then click “Save Setting”.
Andere Handbücher für M2M-711D
1
Inhaltsverzeichnis
Andere ICP DAS USA Messgerät Handbücher
ICP DAS USA
ICP DAS USA PM-2133D Series Bedienungsanleitung
ICP DAS USA
ICP DAS USA PMC-5231 Bedienungsanleitung
ICP DAS USA
ICP DAS USA PMD series Bedienungsanleitung
ICP DAS USA
ICP DAS USA PM-3133-MTCP Bedienungsanleitung
ICP DAS USA
ICP DAS USA PM-3133 Bedienungsanleitung
ICP DAS USA
ICP DAS USA LC-305 Bedienungsanleitung
ICP DAS USA
ICP DAS USA PM-3133 Bedienungsanleitung
ICP DAS USA
ICP DAS USA PM-3133i Bedienungsanleitung
ICP DAS USA
ICP DAS USA PM-4324 Series Bedienungsanleitung
ICP DAS USA
ICP DAS USA PM-3133 Bedienungsanleitung
ICP DAS USA
ICP DAS USA iWSN-9601 Series Bedienungsanleitung
ICP DAS USA
ICP DAS USA i-7005 Bedienungsanleitung
ICP DAS USA
ICP DAS USA PM-3112-240-MTCP Bedienungsanleitung
ICP DAS USA
ICP DAS USA iWSN-9603 Series Bedienungsanleitung
ICP DAS USA
ICP DAS USA PMD-2201 Bedienungsanleitung
ICP DAS USA
ICP DAS USA PMC series Bedienungsanleitung
ICP DAS USA
ICP DAS USA PM-3112-160-MTCP Bedienungsanleitung
ICP DAS USA
ICP DAS USA PMC-5151 Bedienungsanleitung
ICP DAS USA
ICP DAS USA PM-3033-MTCP Bedienungsanleitung
ICP DAS USA
ICP DAS USA PM-3033 Series Bedienungsanleitung
