ICRealtime ICIP2040IR Bedienungsanleitung
IR Intelligent Speed Dome Installation Manual
Version 1.0.0
i
Table of Contents
1INTELLIGENT SPEED DOME INSTALLATION PREPARATION .......................1
1.1 Basic Requirement ................................................................................................................................1
1.2 Check installation space and installation location intension ...........................................................1
1.3 Please keep all package material well for future use.......................................................................1
2SETUP BEFORE INSTALLATION......................................................................2
2.1 Check Accessories................................................................................................................................2
2.2 Open Device...........................................................................................................................................2
2.3 About Ceiling Installation Position Map..............................................................................................2
2.4 Dial Switch Setting (Analog Speed Dome, HDCVI Intelligent Speed Dome) ...............................3
2.5 TF Card Slot and Reset Button ...........................................................................................................4
3CEILING INSTALLATION ...................................................................................5
3.1 Installation Components .......................................................................................................................5
3.2 Ceiling Installation Steps ......................................................................................................................5
3.2.1 Installation Requirements................................................................................................................5
3.2.2 Installation Steps...............................................................................................................................5
4WALL MOUNT BRACKET INSTALLATION........................................................7
ii
4.1 Component Installation .........................................................................................................................7
4.2 Installation...............................................................................................................................................7
4.2.1 Installation Requirements................................................................................................................7
4.2.2 Installation Steps...............................................................................................................................7
5APPENDIX ⅠLIGHTENING PROTECTION AND SURGE PROTECTION ........11
6APPENDIX Ⅱ24V AC WIRE GAUGE AND TRANSMISSION DISTANCE
RELATIONSHIP SHEET ..........................................................................................12
7APPENDIX Ⅲ12V DC WIRE GAUGE AND TRANSMISSION DISTANCE
RELATIONSHIP SHEET ..........................................................................................13
8APPENDIX ⅣWIRE GAUGE REFERENCE SHEET .......................................14
iii
Welcome
Thank you for purchasing our speed dome!
Please read the following safeguards and warnings carefully before you install or use the
product!
iv
Important Safeguards and Warnings
Safety Measures
1. Qualified Engineer Needed
The installation engineer or maintenance engineer shall have corresponding CCTV system
installation certificate or maintenance qualification certificate.
The installation engineer or maintenance engineer shall have qualification certificate for work
at height.
The installation engineer or maintenance engineer shall have the basic knowledge and
operation technique for low-voltage cable layout and low-voltage electronic cable connection.
Please read the installation manual carefully and keep it well for future reference,
We are not liable for any problems caused by unauthorized modifications or attempted repair.
2. Lifting Appliance Requirement
Please select the proper speed dome installation mode and use the lifting appliances at the
safety environment.
The lifting appliances shall have the enough capacity to reach the installation height.
The lifting appliances shall have safe performance.
The precaution measures include two types: Warning and Note.
Warning: It is to alert you there is an optional risk of death or series injury!
Note: It is to alert you there is an optional risk of damage or property loss!
Warning
1. All installation and operation here should conform to your local electrical safety codes. We
assume no liability or responsibility for all the fires or electrical shock caused by improper
handling or installation.
2. Be sure to use all the accessories (such as power adapter) recommended by manufacturer.
3. Do not connect several speed domes to one power adapter. It may result in overheat or fire
if it exceeds the rated load.
4. Before you connect the cable, install or uninstall, or begin the daily maintenance work,
please turn off the power and unplug the power cable.
5. Please make sure the produce is secure firmly on the wall or the ceiling.
6. Please turn off the power and unplug the power cable, If there is any smoke, disgusting
smell, or noise. Please contact your local retailer or customer service centre for help.
v
7. All the examination and repair work should be done by the qualified service engineers. We
are not liable for any problems caused by unauthorized modifications or attempted repair.
Note
1. Safety Transportation
Heavy stress, violent vibration or water splash are not allowed during transportation, storage
and installation.
This series product must use split type package during the transportation.
We are not liable for any damage or problem resulting from the integrated package during
the transportation.
2. When device is malfunction
Shut down the device and disconnect the power cable immediately if there is smoke, abnormal
smell or abnormal function. Please contact your local retailer ASAP.
3. Do not try to dismantle or modify the device
There is risk of personal injury or device damage resulting from opening the shell.
Please contact your local retailer if there is internal setup or maintenance requirement.
We are not liable for any problems caused by unauthorized modifications or attempted repair.
4. Do not allow other object falling into the device
Please make sure there is no metal or inflammable, explosive substance in the speed dome.
The above mentioned objects in the device may result in fire, short-circuit or damage.
Please shut down the device and disconnect the power cable if there is water or liquid falling
into the camera. Please contact your local retailer ASAP.
Please pay attention to the camera. Avoid the sea water or rain to erode the camera.
5. Handle carefully
Do not allow this series product fall down to the ground.
Avoid heavy vibration.
6. Installation Environment Requirement
This series speed dome should be installed in a cool, dry place away from direct sunlight,
inflammable, explosive substances and etc.
This series product shall be away from the strong electromagnetism radiant, please keep it
away from wireless power, TV transmitter, transformer and etc.
7. Daily Maintenance
Please use the soft cloth to clean dust on the shell, or you can use soft cloth with cleaning
liquid to clean the shell and then use soft cloth to make it dry.
vi
Do not use gasoline, dope thinner or other chemical material to clean the shell. It may result
in shell transfiguration or paint flake.
Do not allow the plastic or rubber material to touch the shell for a long time. It may result in
paint flake.
1
1INTELLIGENT SPEED DOME INSTALLATION
PREPARATION
1.1 Basic Requirement
All installation and operation here should conform to your local electrical safety codes.
Before installation, please open the package and check all the components are included.
Please make sure the speed dome installation environment and installation mode can meet
your requirement. If there is special requirement, please contact your local retailer for more
information.
We assume no liability or responsibility for all the fires or electrical shock caused by
improper handling or installation.
1.2 Check installation space and installation location intension
Please make sure the installation environment has enough space to install the speed dome and
its corresponding bracket.
Please make sure the ceiling, wall and the bracket can support the speed dome and its
corresponding installation component. It shall sustain the 8X weight of the speed dome.
1.3 Please keep all package material well for future use
Please keep speed dome package material well in case you need to send it back to your local
retailer or manufacturer for maintenance work.
Non-original package material may result in device damage during the transportation.
2
2SETUP BEFORE INSTALLATION
2.1 Check Accessories
Before the installation, please check the accessories one by one according to the packing list.
Please make sure all the components listed are included.
2.2 Open Device
Remove the package and then take out the device. See Figure 2-1.
Figure 2-1
2.3 About Ceiling Installation Position Map
The ceiling installation position map is to define hard ceiling holes position and cable exit position.
The beeline part is the mechanical blind spot. Please paste it according to your actual
requirement to avoid mechanical blind spot. See Figure 2-2.
3
Figure 2-2
2.4 Dial Switch Setting (Analog Speed Dome, HDCVI Intelligent Speed
Dome)
Open the cover of the pedestal, then you can see there are two dial switches on the PTZ which
are used to set terminal matched resistance. Please refer to Figure 2-3 and Figure 2-4 for more
information
Figure 2-3
Inhaltsverzeichnis
Andere ICRealtime Sicherheitskamera Handbücher
ICRealtime
ICRealtime ICIPP3020HDIR Bedienungsanleitung
ICRealtime
ICRealtime PTZ-N23X4-S Bedienungsanleitung
ICRealtime
ICRealtime ICIP-3000CCD-W Bedienungsanleitung
ICRealtime
ICRealtime ICHD-2000P20X Original Betriebsanleitung
ICRealtime
ICRealtime EL-3000N Bedienungsanleitung
ICRealtime
ICRealtime IPEL-B2012X-IRW1 Bedienungsanleitung
ICRealtime
ICRealtime F Series Bedienungsanleitung
ICRealtime
ICRealtime EL-790 Bedienungsanleitung
ICRealtime
ICRealtime ICIP-P2012C Bedienungsanleitung
ICRealtime
ICRealtime ICHD850VDIR Bedienungsanleitung
ICRealtime
ICRealtime F Series Bedienungsanleitung
ICRealtime
ICRealtime ICR300H3W Bedienungsanleitung
ICRealtime
ICRealtime ICR300H3B Bedienungsanleitung
ICRealtime
ICRealtime EL700 Bedienungsanleitung
ICRealtime
ICRealtime K6 Bedienungsanleitung
ICRealtime
ICRealtime AVS Series Bedienungsanleitung
ICRealtime
ICRealtime ICIP-D2360 Bedienungsanleitung
ICRealtime
ICRealtime ICIP-B2000 Bedienungsanleitung
ICRealtime
ICRealtime Pixim I-Sniper EL-720 Bedienungsanleitung
ICRealtime
ICRealtime EL-470 Bedienungsanleitung
