ICW ELITE 5220 Bedienungsanleitung

ELITE 5220 BEARING REPLACEMENT - 05/02/16 pjm

ELITE 5220 FRONT BEARING REPLACEMENT

Page 1 of 2

DO NOT use power tools to assemble or

adjust the arm. Use hand tools ONLY.

IMPORTANT

•Do not attempt to adjust the Elite arm until all

components are mounted (monitor, keyboard, etc.)

•Arm must be completely horizontal (extended)

before adjusting the arm’s tension. Failure to do so will

damage the arm and void the warranty.

•NEVER loosen or remove any of the shoulder

bolts. Doing so will cause the arm to immediately

come apart with tremendous force, and could cause

serious injury.

• If equipment requiring AC power is mounted to this unit,

haveacertiedelectricianinspecttheinstallation.

• Failure to install this unit according to these instructions

will void all ICW warranties. If installed incorrectly, ICW

is not liable for any damage or injury caused by the unit.

The Elite arm contains high pressure gas

springs. The following cautions MUST be

observed to avoid serious injury.

DANGER!

RELEASE ARM RESISTANCE

Extend the Elite straight out as shown

before releasing the arm’s resistance.

Be sure all equipment is mounted on

the arm before adjusting.

Completely release the

resistance of the arm section

closest to the monitor. Use

the T-handle provided.

DO NOT USE

POWER TOOLS TO ADJUST

END COVERS:

Remove the end

covers by unscrewing

the two 3/4” long

10-24atheadscrews

using a Phillips head

screwdriver.

CENTER COVER:

Remove the center

cover by unscrewing

the four 3/4” long

10-24atheadscrews

using a Phillips head

screwdriver.

TOP COVERS:

Remove the long

arm covers by

unscrewing the

two 1/4” long 6-32

atheadscrews

in the center of

the cover using

a Phillips head

screwdriver.

TORQUE 120 INCH POUNDS. DO NOT LOOSEN.

REMOVE ARM COVERS

REPLACE BOLT & BEARING ASSEMBLIES

Fold arm. Remove

existing bolt and bearing

assemblies beneath the

Elite foot. Replace with

new hardware provided.

40mm ID

bearing

assembly

3/8 bolt

assembly

with 3/8 ID

bearing

REMOVE MONITOR

Unplug and remove the

monitor by unscrewing

the adjustment knob.Save

all hardware. Remove

keyboard or secure it to

keyboard tray.

If you have any questions, please call our

customer service representatives. They will be

able to answer your installation questions.

Toll free 1-800-558-4435

ELITE 5220 BEARING REPLACEMENT - 05/02/16 pjm

ELITE 5220 REAR BEARING REPLACEMENT

Page 2 of 2

REATTACH ARM COVERS

TOP COVERS:

Reattach the long arm covers by replacing the two

1/4”long6-32atheadscrewsinthecenterofthe

cover using a Phillips head screwdriver.

CENTER COVER:

Reattach the center cover by replacing the four 3/4”

long10-24atheadscrewsusingaPhillipshead

screwdriver.

END COVERS:

Reattach the end covers by replacing the two 3/4”

long10-24atheadscrewsusingaPhillipshead

screwdriver.

ADJUST ARM RESISTANCE

Extend the Elite straight out as

shown before increasing the

arm’s resistance. Be sure all

equipment is mounted on the

arm before adjusting.

DO NOT USE

POWER TOOLS TO ADJUST

Replacing the rear bearing assemblies on the Elite 5220 may require two people.

END COVERS:

Remove the end

covers by unscrewing

the two 3/4” long

10-24atheadscrews

using a Phillips head

screwdriver.

CENTER COVER:

Remove the center

cover by unscrewing

the four 3/4” long

10-24atheadscrews

using a Phillips head

screwdriver.

TOP COVERS:

Remove the long

arm covers by

unscrewing the

two 1/4” long 6-32

atheadscrews

in the center of

the cover using

a Phillips head

screwdriver.

TORQUE 120 INCH POUNDS. DO NOT LOOSEN.

REMOVE ARM COVERS

ATTACH MONITOR

Attach the monitor by

screwing the knob through

the rail into the VESA.

REPLACE BOLT & BEARING ASSEMBLIES

Fold arm. Remove

existing bolt and bearing

assemblies beneath the

wall ear. Replace with

new hardware provided.

This process may be easier if one person holds and

lifts the arm up while a second person installs the

replacement bolt and bearing assemblies.

3” Needle

bearing

If you have any questions, please call our

customer service representatives. They will be

able to answer your installation questions.

Toll free 1-800-558-4435

Andere ICW Rack & Stand Handbücher

ICW

ICW LTU-W3-A2 Bedienungsanleitung

ICW

ICW TITAN ELITE T2EQ-C8X5 Bedienungsanleitung

ICW

ICW EV65 Bedienungsanleitung

ICW

ICW ELITE DOUBLE ARM Bedienungsanleitung

ICW

ICW TITAN ELITE T2E12P-WT2-KUB Bedienungsanleitung

ICW

ICW T2 Bedienungsanleitung

ICW

ICW Elite ELP5220 Bedienungsanleitung

ICW

ICW TITAN Bedienungsanleitung

ICW

ICW ERGOVISION 65 Bedienungsanleitung

ICW

ICW TITAN 2020 Bedienungsanleitung

ICW

ICW Elite Bedienungsanleitung

ICW

ICW ULTRA 180 ARM Bedienungsanleitung

ICW

ICW UL90 Bedienungsanleitung

ICW

ICW ELITE 5220 Bedienungsanleitung

ICW

ICW MD Bedienungsanleitung

ICW

ICW ULTRA 180 Bedienungsanleitung

ICW

ICW UL500 Bedienungsanleitung

ICW

ICW PRO SLIDE Bedienungsanleitung

ICW

ICW Ultra 110 Series Bedienungsanleitung

ICW

ICW Elite Bedienungsanleitung

ICW

ICW SINGLE ARM ELITE Bedienungsanleitung

ICW

ICW GX170 Bedienungsanleitung

ICW

ICW Elite Bedienungsanleitung

ICW

ICW ULTRA Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung