IDataLink Maestro Rr Bedienungsanleitung

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certiﬁed technician. Logos and trademarks used here in

are the properties of their respective owners.

WARNING

Pressing the printer icon or “quick printing” this document will print

all of the guides in this compilation.

Open the Bookmarks menu and find your vehicle OR scroll

down until you find the install guide for your vehicle.

Print only the pages for your vehicle using the advanced

options in the Print menu.

Install your Maestro RR according to the guide for your vehicle.

HOW TO USE THIS INSTALL GUIDE

SELECT VEHICLE

PRINT PAGES NEEDED

ELECTRONICS

Click here for:

Radar Integration Installation Guide

Radar Integration Owner’s Guide for Kenwood

and JVC Radios

2016-2018

Ford EscapE

with 4,3" scrEEn

INSTALL GUIDE

RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certiﬁed technician. Logos and trademarks used here

in are the properties of their respective owners.

PRODUCTS REQUIRED

iDatalink Maestro RR or RR2 Radio Replacement Interface

iDatalink Maestro FO2 Installation Harness

PROGRAMMED FIRMWARE

ADS-RR(SR)-FOR02B-DS

ADDITIONAL RESOURCES

Maestro RR2 Programmable Outputs Guide

OPTIONAL ACCESSORIES

Ford EscapE with 4,3" scrEEn 2016-2018

WELCOME

NEED HELP?

Congratulations on the purchase

of your iDatalink Maestro RR Radio

replacement solution. You are

now a few simple steps away from

enjoying your new car radio with

enhanced features.

Before starting your installation,

please ensure that your iDatalink

Maestro module is programmed

with the correct ﬁrmware for your

vehicle and that you carefully review

the install guide.

Please note that Maestro RR will

only retain functionalities that

were originally available in the

vehicle.

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 4

Radio Wire Reference Chart 5

Troubleshooting Table 6

1 866 427-2999

maestro.idatalink.com/support

www.12voltdata.com/forum

[email protected]

Ford EscapE with 4,3" scrEEn 2016-2018

INSTALLATION INSTRUCTIONS

STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from

aftermarket radio main harness to the F02 T-harness and

match the wire functions.

STEP 2

• Connect the factory harness to the F02 T-harness.

STEP 3

• Connect the screen harness to the F02 T-harness.

STEP 4

• Plug the OBDII connector into the OBDII of the vehicle.

STEP 5

• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Connect the auxiliary and backup camera RCA cables into

the aftermarket radio (if equipped).

• Plug the Data cable to the data port of the aftermarket

radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio

jack of the aftermarket radio (If the radio does not have a

dedicated iDatalink audio input, plug into the AUX port of

the radio).

STEP 6

• Connect all the harnesses to the Maestro RR module then

then test your installation.

Ford EscapE with 4,3" scrEEn 2016-2018

AUX INAUX IN

BACKUP CAMBACKUP CAM

STEP 4 OBDII CONNECTOR

CUT AND REMOVE

THE RCA JACKS

STEP 1

MAIN

HARNESS

RCA CABLES

WIRES FROM

VEHICLE

FO2 T-HARNESS

FACTORY RADIO HARNESS

CONNECT ONLY WHEN

THERE IS NO SYNC IN

VEHICLE

WHITE - LF SPEAKER (+)

WHITE/BLACK - LF SPEAKER (-)

GRAY - RF SPEAKER (+)

GRAY/BLACK - RF SPEAKER (-)

GREEN - LR SPEAKER (+)

GREEN/BLACK - LR SPEAKER (-)

PURPLE/BLACK - RR SPEAKER (-)

YELLOW - 12V (+)

BLACK - GROUND

RED - ACCESSORY (+)

BLUE/WHITE - AMP. TURN ON (+)

PURPLE - RR SPEAKER (+)

STEP 2

STEP 5

STEP 6

ORANGE - PARKING LIGHT (+)

PURPLE/WHITE - REVERSE LIGHT (+)

LTGREEN - E-BRAKE (-)

YELLOW/BLACK - FOOT BRAKE

PINK - VEHICLE SPEED

BROWN (NOT CONNECTED)

WIRING DIAGRAM

DATA

CABLE

AUDIO

CABLE

CONNECT TO

AFTERMARKET RADIO

SEE RADIO

WIRE

REFERENCE

CHART FOR

RADIO WIRE

COLORS

MAESTRO RR MODULE

STEERING WHEEL

CONTROL CABLE

NOT REQUIRED

BLUE

BLUE - POWER ANTENNA

SCREEN HARNESS ABOVE RADIO

STEP 3

Ford EscapE with 4,3" scrEEn 2016-2018

RADIO WIRE REFERENCE CHART

Wire

Description Polarity Wire Color on Maestro

T-Harness

Wire Color on Alpine

cable

Wire Color on Kenwood

cable

Wire Color on Pioneer

cable

Wire Color on Sony

cable

Illumination (+) Orange N/A Orange/White Orange/White Orange

Reverse Light (+) Purple/White Orange/White Purple/White Purple/White Purple/White

E-Brake (-) Lt Green Yellow/Blue Lt Green Lt Green Lt Green

Foot Brake (+) Yellow/Black Yellow/Black N/A Pink N/A

VSS (vehicle speed sensor) (DATA) Pink Green/White N/A N/A N/A

Power Antenna (+) Blue Blue Blue N/A N/A

Ford EscapE with 4,3" scrEEn 2016-2018

TROUBLESHOOTING TABLE

PROBLEM SOLUTION

Gauges do not work, radio shows OBD2 Error 1 or Error 2. Ensure OBDII connector is securely attached to the OBD2 connector of the

vehicle.

If you hardwired connections at the OBDII, check connections at the OBDII

connector. Make sure the RED/BROWN wire is on PIN 6 and the YELLOW/

BROWN wire is connected to PIN 14 of the OBDII connector. Do not use

T-Taps. Soldering or military splicing methods are recommended.

Reset the RR.

The light on the Maestro is blinking RED TWICE. Ensure the 4-pin data cable is connected between the radio and the RR, and

that it is plugged into the black port on the Maestro RR. The red and blue

ports on the RR should be empty.

Make sure the correct radio model and serial number were entered during

the ﬂash. Verify the radio’s serial number entered during the ﬂash matches

what is listed on the radio screen. This can be found in the settings of the

radio, listed as Device Id, Device Number, or Serial Number.

The light on the Maestro is ﬂashing RED ONCE. There is no ﬁrmware on the module; ﬂash the RR module.

MAESTRO RR RESET PROCEDURE:

Turn the key to the OFF position, then disconnect all connectors from the module.

Press and hold the module’s programming button and connect all the connectors back to the module. Wait, the module’s LED will ﬂash RED rapidly (this may

take up to 10 seconds).

Release the programming button. Wait, the LED will turn solid GREEN for 2 seconds to show the reset was successful.

TECHNICAL ASSISTANCE

Phone: 1-866-427-2999

Email: maestr[email protected]

Web: maestro.idatalink.com/support add www.12voltdata.com/forum/

IMPORTANT: To ensure proper operation, the aftermarket radio needs to have the latest ﬁrmware from the manufacturer. Please visit the radio

manufacturer’s website and look for any updates pertaining to your radio.

ELECTRONICS

Click here for:

Radar Integration Installation Guide

Radar Integration Owner’s Guide for Kenwood

and JVC Radios

2018

Ford F-sEriEs supEr duty

XL, BasE with no cd pLayEr

INSTALL GUIDE

RETAINS STEERING WHEEL CONTROLS, FACTORY AMPLIFIER, AND MORE!

NOTICE: Automotive Data Solutions Inc. (ADS) recommends having this installation performed by a certiﬁed technician. Logos and trademarks used here

in are the properties of their respective owners.

PRODUCTS REQUIRED

iDatalink Maestro RR or RR2 Radio Replacement Interface

iDatalink Maestro FO2 Installation Harness

PROGRAMMED FIRMWARE

ADS-RR(SR)-FOR02B-DS

ADDITIONAL RESOURCES

Maestro RR2 Programmable Outputs Guide

OPTIONAL ACCESSORIES

Ford F-sEriEs supEr duty XL, BasE with no cd pLayEr 2018

WELCOME

NEED HELP?

Congratulations on the purchase

of your iDatalink Maestro RR Radio

replacement solution. You are

now a few simple steps away from

enjoying your new car radio with

enhanced features.

Before starting your installation,

please ensure that your iDatalink

Maestro module is programmed

with the correct ﬁrmware for your

vehicle and that you carefully review

the install guide.

Please note that Maestro RR will

only retain functionalities that

were originally available in the

vehicle.

TABLE OF CONTENTS

Installation Instructions 3

Wiring Diagram 4

Radio Wire Reference Chart 5

Troubleshooting Table 6

1 866 427-2999

maestro.idatalink.com/support

www.12voltdata.com/forum

[email protected]

Ford F-sEriEs supEr duty XL, BasE with no cd pLayEr 2018

INSTALLATION INSTRUCTIONS

STEP 1

• Unbox the aftermarket radio and locate its main harness.

• Connect the wires shown on the next page from

aftermarket radio main harness to the F02 T-harness and

match the wire functions.

STEP 2

• Connect the factory harness to the F02 T-harness.

STEP 3

• Plug the OBDII connector into the OBDII of the vehicle

(located under driver side dash).

STEP 4

• Plug the aftermarket radio harnesses into the aftermarket

radio.

• Connect the auxiliary and backup camera RCA cables into

the aftermarket radio (if equipped).

• Plug the Data cable to the data port of the aftermarket

radio.

• Insert the Audio cable into the iDatalink 3.5 mm audio

jack of the aftermarket radio (If the radio does not have a

dedicated iDatalink audio input, plug into the AUX port of

the radio).

STEP 5

• Connect all the harnesses to the Maestro RR module then

then test your installation.

Andere Handbücher für maestro Rr

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere iDataLink Autozubehör Handbücher

iDataLink

iDataLink maestro Rr Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

iDataLink

iDataLink Maestro AR Bedienungsanleitung

iDataLink

iDataLink Maestro RR Bedienungsanleitung

iDataLink

iDataLink maestro mus1 Bedienungsanleitung

iDataLink

iDataLink Maestro RR Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

iDataLink

iDataLink maestro mus1 Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

iDataLink

iDataLink Maestro RR Bedienungsanleitung

iDataLink

iDataLink ADS-ALCA Bedienungsanleitung

iDataLink

iDataLink Maestro HRR-HO1 Bedienungsanleitung

iDataLink

iDataLink BLADE Series Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

iDataLink

iDataLink SUB9 Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

iDataLink

iDataLink Maestro RR Bedienungsanleitung

iDataLink

iDataLink Maestro K150 Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

iDataLink

iDataLink maestro Rr Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung

Prorack

Prorack K1163 Bedienungsanleitung