IKUSI ONE SAT Bedienungsanleitung

Programmable multichannel ampliﬁer

ONE

SAT / 118 / Home

REF. 2844 / 2845 / 2849

User Guide

30 General safety instructions

30 Types of notices

31 Basic safety instructions

32 Introduction

33 General description

33 Main features

34 General equipment use

36 Equipment installation and conﬁguration

36 Installation

36 Power connection

37 Quick menu guide

38 Language selection

38 Manual setting

41 Advanced settings

43 Self-installation

45 Maintenance

45 Equipment care

45 Troubleshooting

46 Technical speciﬁcations

46 ONE 118 Model (AFP-201)

47 ONE SAT Model (AFP-292)

48 ONE Home Model (AFP-HOME)

49 Technical annex

50 Warranty

51 Equipment recycling

52 CE Certiﬁcate

Contents

General safety instructions

JRead all of this user manual carefully before plugging in the equipment.

JAlways have these instructions to hand during installation.

JFollow all of the instructions and safety notices regarding equipment handling.

Types of notices

The meaning of the safety notices used in this manual are described below.

DANGER OF DEATH OR INJURY

This safety notice indicates a possible danger for the life and health of people.

Not following these instructions may lead to serious consequences to health and

may even cause fatal injuries.

RISK OF EQUIPMENT DAMAGE

This safety notice indicates a possible dangerous situation. Not following these

instructions may lead to the equipment being damaged.

NOTE

This type of notice is a note containing applicable advice and useful information

for optimum use of the equipment.

HANDLING THE INSIDE OF THE EQUIPMENT IS FORBIDDEN

This notice forbids any work that may affect the working order of the equipment

or its warranty.

DO NOT DISPOSE OF AS URBAN WASTE

This type of notice indicates that the equipment must not be disposed of as

unselected urban waste.

DANGER

TTENTION

General safety instructions / Basic safety instructions

Basic safety instructions

DANGER OF DEATH OR INJURY

JDo not install the equipment during an electrical storm. This could lead to

electrostatic discharge from lightning.

JDo not open the equipment. This could lead to electric discharge.

RISK OF EQUIPMENT DAMAGE

JThe equipment must be appropriately ventilated. Install the equipment in a

dust-free location. Do not place the equipment in a location where the venti-

lation slots are covered or blocked. Install the equipment in a location with at

least 20 cm around it free of other objects.

JDo not expose the equipment to rain or moisture. Install the equipment in

a dry location with no inltration or condensation of water. Should a liquid

enter the equipment, disconnect it immediately from the mains.

JKeep the equipment away from ammable objects, candles and anything

that may cause a re.

JConnect the equipment to an easily accessible power socket. In the event of

an emergency, it will then be possible to quickly unplug the equipment.

JDo not expose the equipment to sources of heat (sun, heating, etc.).

DANGER

ATTENTION

Introduction

General description

Main features

The ONE 118, ONE SAT and ONE Home models are programmable amplication headends

designed to selectively lter analogue and digital UHF channels. Suitable for single-family

and collective dwellings, they are the ideal solution for managing signals of different fre-

quencies and bandwidths.

FM and VHF signals are also amplied. The ONE SAT model also amplies satellite IF sig-

nals. Individual adjustment of each frequency lter, number of channels and automatic gain

control allows for level equalize of selected channels.

JProgramming:

FSelf-installation function.

FAll settings are automatically memorised.

FNo external programmer required, programmed directly from the headend.

KEY

1 BI-FM input

2 BIII-DAB input

3 VHF-UHF/EXT input *

4 UHF3 input

5 UHF2 input

6 UHF1 input

7 SAT-IF1 input *

8 Mains connector

9 Control button

10 Screen (LCD)

11 Front panel with cluster map

12 SAT-IF2 input with no amplication *

13 Output 2; TV+SAT2 *

14 Output test 2*

15 Output test 1

16 Output 1; TV+SAT1 **

17 Earthing

* ONE SAT model only

** In ONE 118 model TV only

Introduction / Main features

FReprogrammable as many times as required.

J10 tuneable UHF lters with the capacity to process 1 to 5 channels each.

JSignal processing:

FTerrestrial inputs with low noise gure (< 6 dB).

FSatellite input with low noise gure (< 9 dB).

FAutomatic signal level equalisation.

FAutomatic gain control.

JExtra functions:

FInternal conguration cloning with transferral to another equipment.

FEquipment locking by security code.

JDimensions : 290 mm x 240 mm x 20 mm

JWeight : 2 kg

The main features of the ONE 118 and ONE SAT models are described below.

ONE 118 Model

Recommended for small and medium-sized installations made up of 10 UHF lters deli-

vering an output level of 118 dBμV.

JInputs:

F5 terrestrial inputs = BI-FM, BIII-DAB, UHF1, UHF2, UHF3.

FBI-FM gain = 35 dB.

FBIII-DAB gain = 40 dB.

FUHF gain = 55 dB.

JOutputs:

F1 TV output.

F1 Test output.

FVHF/UHF output level = 118 dBµV. 1

1 IMD3-60 dB, DIN 45004B (see channel reduction table in Technical Annex)

ONE SAT Model

Recommended for small and medium-sized installations, comprising 10 UHF lters it in-

cludes one satellite input and two mixed television-satellite outputs. CTI compliant.

Compatible with UNICABLE TM

JInputs:

F6 terrestrial inputs= BI-FM, BIII-DAB, UHF1, UHF2, UHF3, VHF-UHF/EXT.

F2 satellite IF inputs.

FBI-FM gain = 30 dB (2 outputs) or 35 dB (1 output).

FBIII-DAB gain = 35 dB (2 outputs) or 40 dB (1 output).

FUHF gain = 55 dB (2 outputs) or 60 dB (1 output).

FVHF-UHF/EXT gain = 35 dB (2 outputs) or 40 dB (1 output).

Introduction / General equipment use

FSAT1 gain = 40 dB.

FSAT2 gain = -1.5 dB.

JOutputs (2 congurable outputs):

a)

F2 TV+FI outputs

F2 Test outputs

FVHF output level = 113 dBµV.1

FUHF output level = 118 dBµV.1

FFI/SAT output level = 116 dBμV.2

F1 TV+FI output

F1 Test output

FVHF output level = 118 dBµV.1

FUHF output level = 123 dBµV.1

FFI/SAT output level = 116 dBμV.2

1 Terrestrial: IMD3-60 dB, DIN 45004B

2 Satellite: IMD3 -35dB, EN50083-3. See channel reduction table in Technical Annex

ONE Home Model

Recommended for small installations made up of 10 UHF lters delivering an output level

of 118 dBμV.

JInputs:

F2 terrestrial inputs = BI-FM, UHF1

FBI-FM gain = 2 dB.

FUHF gain = 40 dB.

JOutputs:

F1 TV output.

F1 Test output.

FVHF/UHF output level = 113 dBµV. 1

1 IMD3-60 dB, DIN 45004B (see channel reduction table in Technical Annex)

General equipment use

Interaction with the equipment using the button and the interpreting of the instructions

displayed on the LCD screen are described below. The programme includes a main menu

formed by submenus that can be selected to modify the equipment operating settings.

Instructions displayed on the LCD screen

This symbol is displayed when manual setting is selected. It refers to the

clusters indicated on the panel.

Introduction / General equipment use

This symbol is displayed in the manual setting menu. Visually locate it on

the LCD screen and see the cluster map on the panel to see which of the

5 equipment clusters is selected.

This acronym is displayed in the main menu. Select it to go back to the

language selection menu.

This symbol is displayed in manual settings and advanced settings and

visually indicates the possibility of moving vertically.

This symbol is displayed in manual and advanced settings and always

includes a numeric value and visually indicates the gain level.

This icon is displayed when the equipment lock is enabled when the

equipment is switched on and after periods when the equipment is not in

use.

Vertical button movement

In the menus and submenus, move the button up or down to browse

upwards and downwards position by position.

In the settings, move the button up or down to modify values position by

position.

NOTE

Keep the button pressed up or down to browse or to modify

values more quickly.

Horizontal button movement

In the menus, move the button to the left or the right to select and go

back position by position.

In the settings, move the button to the left or the right to browse, select

and go back position by position.

NOTE

Keep the button pressed to the left or to the right to browse

more quickly.

Press button

In the menus, this selects the submenu.

In the submenus, this selects the setting.

In the settings, this selects the parameter value.

▲

▼

Equipment installation and conﬁguration / Installation

Equipment installation and conﬁguration

Only the LCD screen and the button are required to congure the equipment. Follow the

steps below to install the equipment and congure the different parameters.

Installation

RISK OF EQUIPMENT DAMAGE

Mechanical handling of the equipment

while it is switched on may lead to it

being damaged. Do not plug the equi-

pment into the mains before or during

installation.

1) Fit and tighten the bolts and plugs securing

the equipment to the wall.

2) Connect the coaxial cable from the aerial to

the equipment.

3) Connect the coaxial cables from the outputs

to the equipment.

If only one of the 2 outputs is used, terminate

the spare port with a 75Ωloadplug.

Power connection

DANGER OF DEATH OR INJURY

Incorrect equipment power connection

may cause an electric shock. Follow the

steps below for the electrical installation

of the equipment.

1) Connect the ground cable.

2) Connect the power plug to the equipment

mains connector.

3) Connect the power plug to the mains socket.

ATTENTION

+12V

POWER







QPSK IN





RF OUT









QPSK IN





RF OUT









QPSK IN





RF OUT









QPSK IN





RF OUT





SRF-111





SRF-111





SRF-111





SRF-111





SRF-111





+24V



+18V





+13V





+18V



+13V



:700 mA







INPUT

OUTPUT

AUX INPUT



GAIN

OUTPUT TEST

INPUT TEST

HPA-120





















+12V

POWER







QPSK IN





RF OUT









QPSK IN





RF OUT









QPSK IN





RF OUT









QPSK IN





RF OUT





SRF-111





SRF-111





SRF-111





SRF-111





SRF-111





+24V



+18V





+13V





+18V



+13V



:700 mA







INPUT

OUTPUT

AUX INPUT



GAIN

OUTPUT TEST

INPUT TEST

HPA-120









   























     







    



+12V

POWER







QPSK IN





RF OUT









QPSK IN





RF OUT









QPSK IN





RF OUT









QPSK IN





RF OUT





SRF-111





SRF-111





SRF-111





SRF-111





SRF-111





+24V



+18V





+13V





+18V



+13V



:700 mA







INPUT

OUTPUT

AUX INPUT



GAIN

HPA-120

















DANGER

Equipment installation and conﬁguration / Fast menu guide

Language

selection

(10-0-0)

(7-0-3)

Filter allocation

to aerials

(9-0-1)

(2-5-3)

(2-7-1)

General

gain

BI - BII inputBIII-DAB input

UHF output VHF-UHF/EXT

input

SAT-IF adjustment

Self-installation

Input preamps

Equipment

information Lock

Restore

values

cloning

Manual setting Advanced settings

Frequency

plan

Outputs numbers

conguration

Filter Adjustment

OUTPUT CONF

TV2 & TV1

Automatic

Gain Control

Deletion 61-69

channels

A.G.C.

OFF

LTE PROTECTION

OFF

Fast menu guide EN

Andere Handbücher für ONE SAT

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IKUSI Verstärker Handbücher

IKUSI

IKUSI NBS-600 Series Bedienungsanleitung

IKUSI

IKUSI SRF Series Bedienungsanleitung

IKUSI

IKUSI ATP-900 Bedienungsanleitung

IKUSI

IKUSI SBA-103-C60 Bedienungsanleitung

IKUSI

IKUSI ONE Compact Gebrauchsanweisung

IKUSI

IKUSI One Sat 118 Bedienungsanleitung

IKUSI

IKUSI ONE 118 Bedienungsanleitung

IKUSI

IKUSI ONE Series Bedienungsanleitung

IKUSI

IKUSI One Sat 118 Bedienungsanleitung

IKUSI

IKUSI 2844 Bedienungsanleitung

IKUSI

IKUSI NBS-801-C48 Bedienungsanleitung

IKUSI

IKUSI MB-01 Bedienungsanleitung

IKUSI

IKUSI NBS-200 Bedienungsanleitung

IKUSI

IKUSI NBS-800 Series Bedienungsanleitung

IKUSI

IKUSI ONE SAT Bedienungsanleitung

IKUSI

IKUSI NBS-801-C60 Bedienungsanleitung

IKUSI

IKUSI One Sat 123 Bedienungsanleitung

IKUSI

IKUSI SAE Series Bedienungsanleitung

IKUSI

IKUSI SBA190 Series Bedienungsanleitung

IKUSI

IKUSI NBS-800 Series Bedienungsanleitung

IKUSI

IKUSI NBS-600 Series Bedienungsanleitung

IKUSI

IKUSI ONE+ SAT Bedienungsanleitung

IKUSI

IKUSI NBS-200 Series Bedienungsanleitung

IKUSI

IKUSI NBS-801-C69 Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung