IKUSI ONE ZERO Bedienungsanleitung

ONE

Programmable terrestrial ﬁltering header

User manual

ZERO

REF. 2848

4 General safety instructions

4 Types of notices

5 Basic safety instructions

6 Introduction

6 General description

6 Main features

7 General use of the unit

9 Unit installation and conﬁguration

9 Installation

9 Power connection

10 Fast menu guide

11 Language selection

11 Manual setting

13 Advanced settings

15 Self-installation

16 Maintenance

16 Unit care

16 Troubleshooting

17 Technical speciﬁcations

17 ONE ZERO Model (FFP-110)

18 Technical appendix

19 Warranty

20 Unit recycling

21 CE Certiﬁcate

Contents

General safety instructions

JRead all of this user manual carefully before plugging in the unit.

JAlways have these instructions to hand during installation.

JFollow all of the instructions and safety notices regarding unit handling.

Types of notices

The meaning of the safety notices used in this manual are described below.

DANGER OF DEATH OR INJURY

This safety notice indicates a possible danger for the life and health of people.

Not following these instructions may lead to serious consequences to health and

may even cause fatal injuries.

RISK OF DAMAGE TO THE UNIT

This safety notice indicates a possible dangerous situation. Not following these

instructions may lead to the unit being damaged.

NOTE

This type of notice is a note containing applicable advice and useful information

for optimum use of the unit.

HANDLING THE INSIDE OF THE UNIT IS FORBIDDEN

This notice forbids any work that may affect the working order of the unit or its

warranty.

DO NOT DISPOSE OF AS URBAN WASTE

This type of notice indicates that the unit must not be disposed of as unselected

urban waste.

DANGER

ATTENTION

General safety instructions/Basic safety instructions

Basic safety instructions

DANGER OF DEATH OR INJURY

JDo not install the unit during an electrical storm. This could lead to electro-

static discharge from lightning.

JDo not open the unit. There is a risk of electrostatic discharge.

RISK OF DAMAGE TO THE UNIT

JThe unit must be appropriately ventilated. Install the unit in a dust-free

location. Do not place the unit in a location where the ventilation slots are

covered or blocked. Install the unit in a location with at least 20 cm around it

free of other objects.

JDo not expose the unit to rain or moisture. Install the unit in a dry location

with no water inltrations or condensation. Should a liquid enter the unit,

disconnect it immediately from the mains.

JKeep the unit away from ammable objects, candles and anything that may

cause a re.

JConnect the unit to an easily accessible power socket. In the event of an

emergency, it will then be possible to quickly unplug the unit.

JDo not expose the unit to sources of heat (sun, heating, etc.).

DANGER

ATTENTION

ENEN

Introduction

General description

Main features

The ONE ZERO model is a programmable terrestrial ltering header, designed to selectively

lter analogue and digital UHF channels. It is suitable for individual and collective dwellings

and it is the ideal solution to correctly equalise television channels that come through the

aerial with different frequencies and amplitudes.

The ONE ZERO model has 10 tuneable UHF lters that can process between 1 and 5 chan-

nels each. Individual adjustment of each frequency lter, number of channels and automatic

gain control allows for level equalisation of selected channels.

JProgramming:

FSelf-installation function.

FAll settings are automatically memorised.

FNo external programmer required, programmed directly from the headend.

KEY

1 Unavailable inputs

2 UHF3 input

3 UHF2 input

4 UHF1 input

5 Mains connector

6 Control button

7 Screen (LCD)

8 Front panel with cluster map

9 Earthing

10 TV outlet

11 Cloning connector

Introduction/General use of the unit

FReprogrammable as many times as required.

J10 tuneable UHF lters that can each process between 1 and 5 channels.

JSignal processing:

FUHF inputs with low noise gure (< 6 dB).

FAutomatic signal level equalisation.

FAutomatic gain control.

JExtra functions:

FInternal conguration cloning with transferral between units.

FUnit locking by security code.

JDimensions: 300 mm x 250 mm x 41 mm

JWeight: 2.2 kg

General use of the unit

Interaction with the unit using the control button and how to interpret the instructions

displayed on the LCD screen are described below. The programme includes a main menu

formed by submenus that can be selected to modify the unit operating settings.

Instructions displayed on the LCD screen

This symbol is displayed when manual setting is selected. It refers to the

clusters indicated on the panel.

This symbol is displayed in the manual setting menu. Visually locate it on

the LCD screen and see the cluster map on the panel to see which of the

3 unit clusters is selected.

This acronym appears on the main menu. Select it to return to the lan-

guage selection menu.

This symbol is displayed in manual settings and advanced settings and

visually indicates the possibility of moving vertically.

This symbol is displayed in manual and advanced settings and always

includes a numeric value and visually indicates the gain level.

This icon is displayed with the unit lock enabled when the unit is

switched on and after periods when the unit is not in use.

Introduction/General use of the unit

Vertical button movement

In the menus and submenus, move the button up or down to browse

upwards and downwards position by position.

In the settings, move the button up or down to modify values position by

position.

NOTE

Keep the button pressed up or down to browse or to modify

values more quickly.

Horizontal button movement

In the menus, move the button to the left or the right to select and go

back position by position.

In the settings, move the button to the left or the right to select and go

back position by position.

NOTE

Keep the button pressed to the left or to the right to browse

more quickly.

Press button

In the menus, this selects the submenu.

In the submenus, this selects the setting.

In the settings, this selects the parameter value.

Unit installation and conﬁguration

Only the LCD screen and the control button are required to congure the unit. Follow the

steps below to install the unit and congure the different parameters.

Installation

RISK OF DAMAGE TO THE UNIT

Mechanical handling of the unit while

it is switched on may lead to it being

damaged. Do not plug the unit into the

mains before or during installation.

1) Fit and tighten the bolts and plugs securing

the unit to the wall.

2) Connect the coaxial cable from the aerial to

the unit.

3) Connect the coaxial cable from the outlet to

the unit.

Power connection

DANGER OF DEATH OR INJURY

Incorrect unit power connection may

cause an electric shock. Follow the

steps below for the electrical installation

of the unit.

1) Connect the earthing cable.

2) Connect the power plug to the unit mains

connector.

3) Connect the power plug to the mains socket.

ATTENTION

DANGER

Unit installation and conﬁguration/Fast menu guide

Fast menu guide

Language

selection

(10-0-0)

(7-0-3)

Filter allocation

to aerials

(9-0-1)

(2-5-3)

(2-7-1)

Mast-head amplier power supply

Aerial lter setting

Self-installation

Input preamps Conguration

cloning

Lock Unit

information

Restore set-

tings

Manual setting Advanced settings

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere IKUSI Verstärker Handbücher

IKUSI

IKUSI ONE Series Bedienungsanleitung

IKUSI

IKUSI SAE Series Bedienungsanleitung

IKUSI

IKUSI ONE+ SAT Bedienungsanleitung

IKUSI

IKUSI ONE 118 Bedienungsanleitung

IKUSI

IKUSI NBS-800 Series Bedienungsanleitung

IKUSI

IKUSI NBS-801-C69 Bedienungsanleitung

IKUSI

IKUSI NBS-200 Bedienungsanleitung

IKUSI

IKUSI ATP-900 Bedienungsanleitung

IKUSI

IKUSI One Sat 118 Bedienungsanleitung

IKUSI

IKUSI 2844 Bedienungsanleitung

IKUSI

IKUSI ONE SAT Bedienungsanleitung

IKUSI

IKUSI NBS-800 Series Bedienungsanleitung

IKUSI

IKUSI SRF Series Bedienungsanleitung

IKUSI

IKUSI SBA190 Series Bedienungsanleitung

IKUSI

IKUSI NBS-801-C48 Bedienungsanleitung

IKUSI

IKUSI NBS-801-C60 Bedienungsanleitung

IKUSI

IKUSI NBS-600 Series Bedienungsanleitung

IKUSI

IKUSI NBS-600 Series Bedienungsanleitung

IKUSI

IKUSI NBS-200 Series Bedienungsanleitung

IKUSI

IKUSI One Sat 118 Bedienungsanleitung

IKUSI

IKUSI ONE SAT Bedienungsanleitung

IKUSI

IKUSI ONE Compact Gebrauchsanweisung

IKUSI

IKUSI One Sat 123 Bedienungsanleitung

IKUSI

IKUSI SBA-103-C60 Bedienungsanleitung

Beliebte Verstärker Handbücher anderer Marken

ASTRO

ASTRO HVO V40 P Bedienungsanleitung

Marantz

Marantz SUPERSCOPE BLA-545 Montageanleitung

NAD

NAD CI980 Bedienungsanleitung

Technics

Technics SE-CH770 Bedienungsanleitung

Harman Kardon

Harman Kardon HK6300 Bedienungsanleitung

NAD

NAD T975 Bedienungsanleitung

McIntosh

McIntosh MA6850 Bedienungsanleitung

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Bedienungsanleitung

Viatron

Viatron Autrix Bedienungsanleitung

GME

GME GA9800 Bedienungsanleitung

Atlas

Atlas CP700 Bedienungsanleitung

Roland

Roland KC-1000 Bedienungsanleitung

Pyle

Pyle PFMRA350BW Bedienungsanleitung

Advantage

Advantage S-250 Bedienungsanleitung

IRT Electronics

IRT Electronics DVA-3007 Bedienungsanleitung

Dimavery

Dimavery BA-100 Series Bedienungsanleitung

Sony

Sony XM-S400D Bedienungsanleitung

Schertler

Schertler ROY X Bedienungsanleitung