•Be careful when tightening the clamps of the hand clamp.
•The device should be cleaned with the use of appropriate
tools and cleaning agents, as listed in the section on cleaning
and maintenance.
•Use only original spare parts or those recommended by the
manufacturer.
•Keep the package with the tool out of the reach of children.
•The tool may contain sharp edges and metal filings on the
surface.
•The tool should be stored and transported in accordance
with the manufacturer's recommendations.
•The tool was manufactured in industrial conditions with all
safety conditions.
Bezpieczeństwo i ochrona środowiska3
3.2 Storage
The Dallas 2 tool is delivered by the manufacturer in unit packages
or in a professional box, depending on the type of order.
It is recommended to store the tool in a separate, rigid unit package
to ensure the durability of the tool.
Transport, cleaning and maintenance4
4.1 Maintenance
After each use, the tool should be washed with water and dried
or wiped with a cloth. Scrape off deposits with a copper brush.
4.2 Storage
•If the tool is not in use for an extended period of time, it should
be stored in a safe and dry place.
•Keep the tool away from heavy, sharp objects.
•Place the tool in the appropriate place in a chest or a box.
•The tool must be kept out of the reach of children.
•Do not expose the tool to direct sunlight.
•Do not keep the tool in places where the temperature is above
35 degrees Celsius.
•Transport the tool in packaging protecting against physical
damage.
•Do not place heavy loads on the tool or package. This can
damage the entire tool or its components.
•Dropping the tool may disturb its functioning or result in
permanent damage.
4.3 Transportation
10Dallas 2- user manual9Dallas 2- user manual
