V2 ENGLISH 17-0767
Adjusting the lights
Note: If you turn o or unplug your light strip, it will remember
your last brightness and color settings.
• Press (power) to turn the light strip on and o.
• Press (COLOR) repeatedly to change the color
combination. There are 20 available colors.
• Press (BRIGHT) repeatedly to adjust the brightness.
There are eight light levels.
SPECIFICATIONS
• Input: 5V DC, 1A
• USB power supply (not included): 5V DC, 0.5A
minimum (1A or more recommended)
• Length: 6.5 ft. (1.9 m)
TROUBLESHOOTING
LEDs will not turn on.
• Press the power button to make sure that your light is
turned on, then press (BRIGHT) to increase the
brightness.
• Make sure that your lights are connected to a working
USB port or power outlet. If connected to a computer,
turn on your computer.
LEDs icker or turn on and o.
• Make sure that your lights are plugged into a working
power outlet or USB port. Try plugging into a dierent
power source.
• Make sure that the cable is not damaged.
SAFETY INFORMATION
• To avoid damage to the light strip, do not sharply twist or
bend the light strip 90°.
• Do not cut the silver solder markings. Only cut in the
center of the copper-colored pads.
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and
Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2017 Best Buy. All rights reserved.
Made in China
NS-PCG6RGB18_17-0767_QSG_V2_EN_Final.ai 2 11/14/2017 10:03:35 AM
