Inspur NF5260FM6 Bedienungsanleitung

Inspur Server NF5260FM6

User Manual

Document Version: V1.0

Release Date: 2021/05/28

Inspur Proprietary. Do Not Duplicate or Distribute.

reserved.

No part of this document may be reproduced or transmitted in any form or by

any means without prior written consent of Inspur.

Environmental Protection

Please dispose the packaging of our products at a waste collection station for

recycling to facilitate pollution prevention and environmental protection.

Trademarks

Inspur and Inspur Logo are the registered trademarks of Inspur.

All the other trademarks or registered trademarks mentioned herein are the

property of their respective holders.

Security Statement

Inspur is intensely focused on the product safety of servers and has placed a

high priority on this. For better understanding of this product, carefully read

through the following security risk statements.

 When changing an application of a server or replacing one, you may restore

BIOS and BMC firmware settings to factory defaults, delete information, and

clear logs to protect data privacy. We also recommend that you use a trusted

third-party eraser tool to fully erase data on the drives.

 The products, services or features you purchased may obtain or use some

personal data during operation or fault locating. There should be user

privacy policies in place with adequate measures implemented in

accordance with the applicable laws to ensure that users' personal data

are fully protected.

 You can contact our Inspur customer service representative to obtain our

Statement on Open-source Software for Servers.

 Some interfaces and commands for production, assembly and return-to-

depot, and advanced commands for locating faults, if used improperly,

may cause equipment abnormality or business interruption. This is not

described herein. Please contact Inspur for such information.

 Inspur has established emergency response procedures and action plans

for security vulnerabilities, so that product safety issues can be dealt in a

timely manner. Please contact Inspur Customer Service for any safety

problems found or necessary support on security vulnerabilities when

using our products.

Inspur Proprietary. Do Not Duplicate or Distribute.

Inspur shall remain committed to safety of our products and solutions to

achieve better customer satisfaction.

Disclaimer

The products, services, or features you purchase shall be bound by the

contract entered into between you and Inspur Group. All or part of the

products, services and features described herein may not be within your

purchase or usage scope. Unless otherwise agreed in the contract, Inspur

makes no express or implied statement or warranty on the contents herein.

Images provided herein are for reference only and may contain information

or features that do not apply to your purchased model. This manual is only

used as a guide. Inspur shall not be liable for any damage, including but not

limited to loss of profits, loss of information, interruption of business,

personal injury, or any consequential damage incurred before, during, or

after the use of our products. Inspur assumes you have sufficient knowledge

of servers and are well trained in protecting yourself from personal injury or

product damages during operation and maintenance. The information in this

manual is subject to change without notice. Inspur shall not be liable for

technical or editorial errors or omissions contained in this manual.

Technical Support

Global Service Hotline: 1-844-860-0011 (toll-free)/1-760-769-1847 (DID)

Address: No. 1036, Langchao Road, Jinan, Shandong Province, China

Inspur Electronic Information Industry Co., Ltd.

Email: [email protected]

Postal Code: 250101

Foreward

Abstract

This manual describes the server's specifications, features, hardware setup,

warranty information and troubleshooting, which will help users to

understand how best to utilize the server and all its functionalities.

Target Audience

This manual is intended for:

 Technical support engineers

 Product maintenance engineers

It is recommended that server installation, configuration, or maintenance is

performed by experienced technicians with knowledge in servers only.

Safety Precautions

 If your purchases do not include Inspur on-site installation service, make

sure that you inspect the shipping cartons before unpacking the

equipment. If a shipping carton appears severely damaged, water

immersed, or the seal or pressure-sensitive adhesive tape (PSA) is broken,

report this based on your purchase channel. If you purchased from a

third-party supplier, contact your supplier directly; if you purchased

through Inspur direct sales stores, call Inspur service hotline 1-844-860-

0011/1-760-769-1847 for technical support.

 For your safety, please do not disassemble the server's components,

extend configuration or connect other peripherals arbitrarily. You can

contact Inspur for our support and guidance.

 Before disassembling the server's components, please be sure to

disconnect all the cables connected to the server.

 Please install the product-compatible operating system and use the

driver that comes with the server or provided by Inspur. You can go to our

official site, on the Top Navigator, click on Support > Product Support >

Drivers, and then find the correct driver of your product based on the

prompt. An incompatible operating system or a non-Inspur driver may

cause compatibility issues and affect the normal use of the product.

Inspur will not assume any responsibility or liability for this.

 BIOS and BMC settings are critical to configuring your server. Unless you

have specific requirements, always use the factory defaults. Do not make

unauthorized modifications. Change the BMC password the first time you

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

A potential for serious injury, or even death if not

properly handled

A potential for minor or moderate injury if not properly

handled

A potential loss of data or damage to equipment if not

properly handled

Operations or information that requires special attention

to ensure successful installation or configuration

Supplementary description of important information

Revision History

Version

Date

Description of Changes

V1.0

2021/05/28

Initial release

Table of Contents

Safety Instructions......................................................................................1

Warnings.........................................................................................................1

Precautions .....................................................................................................2

Product Specifications ................................................................................5

Introduction ....................................................................................................5

2.1.1 Features................................................................................................5

2.1.2 9 × 3.5” Configuration...........................................................................6

2.1.3 16 × 2.5” Configuration.........................................................................6

Features and Specifications ............................................................................6

Power Efficiency ..............................................................................................9

Component Description............................................................................ 12

Front Panel Components............................................................................... 12

3.1.1 9 × 3.5” Bays .......................................................................................12

3.1.2 16 × 2.5” Bays .....................................................................................13

3.1.3 Front Control Panel Button with LED ...................................................13

3.1.4 Drive Tray LEDs ................................................................................... 14

Rear Panel.....................................................................................................15

Mainboard Layout......................................................................................... 16

3.3.1 CMOS Clear Jumper .............................................................................18

Structure ....................................................................................................... 18

Operation................................................................................................. 20

Powering the Server On ................................................................................ 20

Powering the Server Off ................................................................................ 20

Extending the server from the rack ............................................................... 20

Removing the Server Top Cover ....................................................................21

Installing the Server Top Cover......................................................................22

Removing the PCIe Riser Assembly................................................................22

Installing the PCIe Riser Assembly.................................................................23

Removing the Air Director .............................................................................23

Hardware Components ............................................................................ 25

Introduction .................................................................................................. 25

Processor Components .................................................................................25

DIMM Components ........................................................................................28

5.3.1 How to Populate DIMMs......................................................................28

5.3.2 DIMM Installation Procedure...............................................................29

Hot-swap Drive Components ........................................................................30

Redundant Hot-Swap Power Supply Components ........................................31

Expansion Card Components ........................................................................ 33

Air Director Components ...............................................................................34

Fan Module Components .............................................................................. 35

Cabling..................................................................................................... 37

Firmware Upgrade and Configuration ...................................................... 38

Fault Diagnosis and Troubleshooting ....................................................... 39

FAQ About Hardware ....................................................................................39

8.1.1 No Power on Boot...............................................................................39

8.1.2 No Display after Powering-on ............................................................40

8.1.3 Status LED Alarm of the Front Panel ...................................................40

8.1.4 Stuck on Self-test or Other Screens Upon Boot.....................................41

8.1.5 Power Module LED Not Lit or Turning Red...........................................41

8.1.6 Abnormal Drive Status LEDs................................................................42

8.1.7 Excessive Noise from Chassis Fans .....................................................43

8.1.8 Server Alarm Ringing.......................................................................... 43

8.1.9 Keyboard and Mouse Not Work ..........................................................44

8.1.10 USB Port Problem ...............................................................................44

FAQ About System Software..........................................................................45

8.2.1 FAQ About OS Installation................................................................... 45

8.2.2 Error while Installing Operating System via PXE .................................46

8.2.3 Memory Capacity Error .......................................................................46

8.2.4 System Network Error .........................................................................47

Battery Replacement ................................................................................ 48

Electrostatic Discharge (ESD) .................................................................... 49

ESD Prevention.............................................................................................. 49

Anti-ESD Grounding Methods........................................................................49

Server Entrance and Runtime Environment Requirements ........................50

Ambient Temperature ................................................................................... 50

Reliability ......................................................................................................50

Altitude and Atmospheric Pressure ............................................................... 51

Alternating Temperature and Humidity.........................................................51

Extended Operating Temperature................................................................. 51

Limits of the Extended Operating Temperature.............................................51

Cooling Limits................................................................................................52

Runtime Environment Requirements.............................................................52

Electromagnetic Requirements ..................................................................... 56

Power Supply Requirements ......................................................................... 57

11.10.1 Requirements for AC Power Supply................................................57

11.10.2 Requirements for DC Power Supply................................................58

11.10.3 Considerations on AC Power Supply ..............................................58

11.10.4 HVDC Power Supply .......................................................................58

11.10.5 Requirements for HVDC Power Supply ...........................................58

11.10.6 Considerations on HVDC Power Supply..........................................59

11.10.7 DC Power Supply............................................................................60

Service Terms ........................................................................................... 61

Appendices .............................................................................................. 62

Reference Tables of Neodymium Content in HDDs........................................ 62

Glossary ........................................................................................................ 63

Abbreviations................................................................................................ 69

Safety Instructions

Warnings

The following warnings indicate potential hazards that may cause property damage,

personal injury, or death.

1. The power supply units of this system may generate a high voltage and

dangerous energy that can result in personal injury. Without the permission of

Inspur, do not remove the chassis cover to install, remove, or replace any

components in the system. Such work can only be performed by a qualified

technician who has been trained by Inspur.

2. Ensure the system is powered by an external power supply that matches the

ratings indicated on the nameplate. Please use a voltage regulator or UPS

(uninterruptible power supply) to prevent damage to the system that is caused

by voltage sags or surges.

3. If an extension cable is required, always use a three-core cable with a properly

grounded plug, and ensure that the total rated current of all the devices

connected to the extension cable does not exceed 80% of the cable's rated

current.

4. For the safety of the system and user, be sure to use the power cables and

sockets (if available) shipped with the product, and do not replace them with

other power cables or plugs.

5. To avoid electrical shocks caused by electrical leakage, always connect the

power cables of the system and peripheral devices to the properly grounded

sockets. Please plug the three-prong plug into a properly grounded and easily

accessible three-prong AC power socket. Be sure to use the ground pin of the

cable, and do not use an adapter or unplug the ground pin. Do not operate the

system without a grounding conductor installed. If you're not sure whether the

grounding protection is in place, please contact an electrician.

6. Do not insert any object into the openings of the system to avoid a fire or

electrical shock caused by a short circuit of inner components. Otherwise, it

may result in a short circuit of inner components and thus cause a fire or

electrical shock.

7. Keep the system away from heatsinks and heat sources, and ensure the

ventilation openings are not blocked.

8. Avoid contaminating the inside of the system or other components with food

debris or liquid. Do not use the product in a humid or dusty environment.

9. Always use the battery type recommended by the manufacturer or a similar

battery for replacement. Using an incorrect battery type may cause an

explosion. Never attempt to dismantle, squeeze or dismantle a battery or short

circuit the battery. Do not throw it into fire or water, or expose it to an

environment with a temperature above 60 °C. Ensure the used batteries are

properly and safely disposed of. Do not mix a used battery with a circuit board

with batteries or with other components and wastes. For information on

battery recycling, contact your local recycling agency.

10. Before installing devices on a stand-alone cabinet, install the front and side

leveling feet. For a cabinet connected to other cabinets, install the front

leveling feet first. Be sure to install the leveling feet before installing devices in

the cabinet to prevent the cabinet from tipping over to cause personal injury.

After devices and other components are installed in the cabinet, only slide one

component out of the cabinet at a time. Pulling out multiple components at a

time may cause the cabinet to tip over and result in personal injury.

11. Do not move the cabinet alone. At least two people are required to move the

cabinet.

12. Do not touch the copper busbar when the system is powered on. Do not short

circuit the copper busbar.

13. This is a "Class A" product, which may cause radio interference. You may need

to take adequate measures against its impact.

Precautions

Before using the product, please carefully read the following precautions to avoid

the issues that may cause component damage or data loss.

1. Disconnect the product's power cable from the power socket and contact Inspur

Customer Service under any of the following circumstances.

a. The power cable, extension cable, or power plug is damaged.

b. The product gets wet with water.

c. The product falls off or is damaged.

d. An object falls into the product.

e. The product does not work properly when the operating instructions are

followed.

2. If the system is exposed to moisture, follow the steps below.

a. Power off the system and devices. Disconnect their power cables, wait 10

to 20 seconds, and then open the chassis cover.

Inhaltsverzeichnis

Andere Inspur Server Handbücher

Inspur

Inspur Tiansuo TS860 Bedienungsanleitung

Inspur

Inspur NF5266M6 Bedienungsanleitung

Inspur

Inspur I48 Bedienungsanleitung

Inspur

Inspur Yingxin NP3020M2 Bedienungsanleitung

Inspur

Inspur NF3120M5 Bedienungsanleitung

Inspur

Inspur NF5220 Bedienungsanleitung

Inspur

Inspur NF5280M6 Bedienungsanleitung

Inspur

Inspur NX5760M3 Bedienungsanleitung

Inspur

Inspur 3408 Series Merkblatt

Inspur

Inspur SA5112M4 Bedienungsanleitung

Inspur

Inspur Yingxin NX 5440 Bedienungsanleitung

Inspur

Inspur NP5540M3 Bedienungsanleitung

Inspur

Inspur NF5488M5 Bedienungsanleitung

Inspur

Inspur i24 Bedienungsanleitung

Inspur

Inspur NF8260M5 Bedienungsanleitung

Inspur

Inspur NF5888M5 Bedienungsanleitung

Inspur

Inspur Yingxin Bedienungsanleitung

Inspur

Inspur NF5180M6 Bedienungsanleitung

Inspur

Inspur NP3060 Bedienungsanleitung

Inspur

Inspur NF5468A5 Bedienungsanleitung

Inspur

Inspur SA5212M4 Bedienungsanleitung

Inspur

Inspur NF5266M6 Bedienungsanleitung

Inspur

Inspur NF5180M5 Bedienungsanleitung

Inspur

Inspur NF5266M5 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung