Inspur NF5280M5 Bedienungsanleitung

Inspur Server NF5280M5

Acceptance Manual

Version 1.2

Release date 2020-01

Inspur proprietary and confidential information

Honorific customer：

No part of this document may be reproduced or modified or transmitted in any form or by any

means without prior written consent.

Note: The products, services or features you purchase should be subject to Inspur Group's

commercial contracts and terms. All or part of the products, services, or features described in

this document may not be within the scope of your purchase or use. Unless otherwise agreed

in the contract, Inspur Group makes no express or implied statement or warranty on the

contents of this document. The content of this document may be updated from time to time

due to product version upgrades or other reasons. Unless otherwise agreed, this document is

intended as a guide only, and all statements, information, and recommendations in this

document do not constitute any express or implied warranty.

Inspur and 浪潮 are registered trademarks of Inspur Group.

Windows is a registered trademark of Microsoft Corporation.

Intel and Xeon are registered trademarks of Intel Corporation.

Other trademarks belong to their respective registered companies.

Technical Service：

4008600011

Address：

1036 Langchao Road, Jinan City, China

Inspur Electronic Information Industry Co., Ltd.

Postcode：

250101

Inspur proprietary and confidential information

Version Update

Date

Version

Prepared / Revised

Reviewer

Approver

Description

2020-01-10

1.2

iii

Inspur proprietary and confidential information

Contents

Contents.......................................................................................................................................... iii

1Hardware Test...........................................................................................................................4

1.1 Hardware Test.................................................................................................................4

1.1.1 Packaging............................................................................................................4

1.1.2 Chassis ................................................................................................................5

1.1.3 PSUs....................................................................................................................5

1.1.4 Hardware Detection ............................................................................................7

1.1.5 Hard Disk Controllers.........................................................................................8

1.1.6 Alarm, Firmware Version, and Hardware Status Detection..............................10

2BMC Test................................................................................................................................12

2.1 BMC Test......................................................................................................................12

2.1.1 BMC Test..........................................................................................................12

3Hard Disk Controller Test.......................................................................................................22

3.1 Hard Disk Controller Test.............................................................................................22

3.1.1 Configuring RAID1 ..........................................................................................22

3.1.2 Configuring RAID5 ..........................................................................................23

4Network Port Test...................................................................................................................25

4.1.1 Network Port PXE.............................................................................................25

5Customer Acceptance Sign-off Sheet .....................................................................................27

Inspur proprietary and confidential information

1Hardware Test

1.1 Hardware Test

1.1.1 Packaging

Table1-1 Packaging

Item

Content

Objective

To verify the server packaging.

Prerequisites

The structure of the mainboard and hard disk backplane is

intact.

Procedure

1. Check whether the packaging is intact and not soaking.

2. Check whether the anti-shock or anti-dumping label turns

red (if there is a corresponding label). The common labels

are as follows:

3. Check the components in the carton against the packing

list.

Expected result

1. The packaging is in good condition and has no water

stain.

2. The anti-shock or anti-fall label is green.

3. All components listed in the packing list are intact.

Description

None

Inspur proprietary and confidential information

1.1.2 Chassis

Table 1-2 Chassis Structure

Item

Content

Objective

To verify the server chassis structure.

Prerequisites

The structure of the mainboard and hard disk backplane is

intact.

Procedure

1. Check whether there are any scratches or oxidation on the

chassis surface or deformation of the chassis cover.

2. Check whether the mounting ears are in good condition

and properly install.

3. Check whether the surface label and mylar label are

damaged or missing.

Expected result

1. The chassis is in good condition, without scratches,

oxidation, or deformation.

2. The mounting ears are in good condition and properly

installed.

3. The surface label and mylar label of the case are complete

and not damaged.

Description

None

1.1.3 PSUs

Table 1-3 PSUs

Item

Content

Objective

To verify the installation and power-on status of the power

supply units (PSUs).

Prerequisites

The structure of the mainboard and hard disk backplane is

intact.

Inspur proprietary and confidential information

Procedure

1. Install PSUs into the slots. You can install one to four

PSUs, and install filler modules in the vacant slots.

2. Connect power cables to the PSUs, wait for 10 seconds,

and press the power button to power on the server.

Expected result

1. The PSUs and filler panel are installed smoothly and

properly.

2. The PSUs fit the chassis properly.

3. The PSUs are working properly and the indicators are

steady green when the server is being powered on.

4. No abnormal noise is heard during the power-on

operation.

Description

None

Table 1-4 PSU Hot Swap Function

Item

Content

Objective

To verify the PSU hot swap function.

Prerequisites

The structure of the mainboard and hard disk backplane is

intact.

Procedure

1. Insert one PSU into the slot.

2. Connect the power cables and wait 10 seconds till the

server is powered on.

3. Insert second PSU into another slot. Connect power

cables to the PSU and check that the power status

indicator is steady green.

4. Remove the first PSU from the slot.

5. Insert the first PSU into the slot. Connect power cables to

the PSU and check that the power status indicator is

steady green.

6. Remove the power cable from the second PSU

Inspur proprietary and confidential information

Expected result

The server is operating properly during the test.

Description

None

Table 1-5 PSU Backup Function

Item

Content

Objective

To verify the PSU backup function.

Prerequisites

The structure of the mainboard and hard disk backplane is

intact.

Procedure

1. Insert two PSUs into the server.

2. Connect power cables to the PSUs and wait 10 seconds

until the server is powered on.

3. Check that the power status indicators on the PSUs are

steady on.

4. Remove the power cable from the first PSU, and remove

the first PSU from the slot. Check that the other PSU and

the server are operating properly.

5. Insert the first PSU into the slot. Check that the power

status indicator is steady on.

6. Remove the power cable from the second PSU, and

remove the second PSU from the slot. Check that the

other PSU and the server are operating properly.

Expected result

The server is operating properly during the test.

Description

None

1.1.4 Hardware Detection

Table 1-6 Hardware Detection

Item

Content

Objective

To verify that the system detects hardware properly.

Inspur proprietary and confidential information

Prerequisites

The structure of the mainboard and hard disk backplane is

intact.

Procedure

1. Power on the system, during the system startup, press

DEL to enter the BIOS setup screen.

2. View the CPU model and quantity.

3. View the total memory capacity.

4. ChooseAdvanced > PXE Configuration, and view the

MAC addresses of the network ports.

5. View the system serial number (S/N).

6. View the basic input/output system (BIOS) version.

Expected result

1. The BIOS SETUP screen is displayed.

2. The CPU model and quantity are the same as the actual

configurations.

3. The total memory capacity is consistent with actual

configurations.

4. ChooseAdvanced > PXE Configuration, the MAC

addresses of the network ports are displayed.

5. The System S/N parameter is specified.

6. The BIOS version is displayed.

7. No abnormal noise is heard during the startup.

Description

None

1.1.5 Hard Disk Controllers

Table 1-7 Hard Disk Controllers

Item

Content

Objective

To verify that the RAID controller card operates properly.（LSI

SAS 3008）

Inspur proprietary and confidential information

Prerequisites

The structure of the mainboard and hard disk backplane is

proper, and hard disks are detected after the server is powered

on.

Procedure

1. Power on the system, log in to the web interface through

the management network port. Press Ctrl+C to enter

controller card setup screen during the system

startup.( UEFI mode needs to be viewed in the BIOS)

2. View the LSI SAS 3008 BIOS version and the firmware

version on the displayed screen.

3. On theAdapter Properties screen, check the NVDATA

version.

4. On the SAS Topology menu, expand the menu, and check

the hard disk model and quantity.

Expected result

1. The SETUP screen is displayed after you press Ctrl+C.

2. The LSI SAS3008 BIOS versions, firmware versions, and

NVDATA versions are displayed.

3. The hard disk model and quantity are the same as actual

configurations.

Description

None

Table 1-8 Hard Disk Controllers

Item

Content

Objective

To verify that the RAID controller card operates properly.（LSI

SAS 3108）

Prerequisites

The structure of the mainboard and hard disk backplane is

proper, and hard disks are detected after the server is powered

on.

Andere Handbücher für NF5280M5

Inhaltsverzeichnis

Andere Inspur Server Handbücher

Inspur

Inspur NF5180M5 Bedienungsanleitung

Inspur

Inspur NF5266M5 Bedienungsanleitung

Inspur

Inspur Yingxin NF5280M2 Bedienungsanleitung

Inspur

Inspur NF5888M5 Bedienungsanleitung

Inspur

Inspur i48M6 Bedienungsanleitung

Inspur

Inspur NF5266M5 Bedienungsanleitung

Inspur

Inspur NF5280M5 Bedienungsanleitung

Inspur

Inspur NF5448A6 Kurzanleitung

Inspur

Inspur NP5540M3 Bedienungsanleitung

Inspur

Inspur NF5488A5 Bedienungsanleitung

Inspur

Inspur NF3120M5 Bedienungsanleitung

Inspur

Inspur 3408 Series Merkblatt

Inspur

Inspur SA5112M4 Bedienungsanleitung

Inspur

Inspur Yingxin NX 5440 Bedienungsanleitung

Inspur

Inspur NP3060 Bedienungsanleitung

Inspur

Inspur Yingxin Bedienungsanleitung

Inspur

Inspur Yingxin NP3020M2 Bedienungsanleitung

Inspur

Inspur NF5270M3 Bedienungsanleitung

Inspur

Inspur NF5466M5 Bedienungsanleitung

Inspur

Inspur NF5468A5 Bedienungsanleitung

Inspur

Inspur ON5263M5 Bedienungsanleitung

Inspur

Inspur NF3180A6 Bedienungsanleitung

Inspur

Inspur Tiansuo TS860 Bedienungsanleitung

Inspur

Inspur NF5288M5 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung