Inspur NP3060 Bedienungsanleitung

Dear User of Inspur Yingxin Server,

Heartfelt thank you for your use of Inspur Yingxin Server!

This manual introduces the technical characteristics, the system installation and

setup of the server to help you to fully understand and expediently use this server.

Please deliver the package of our product to the waste recycling station for

recycling, in favor of pollution prevention and humankind’s beneﬁt.

This manual is the property of the Inspur Group Co., Ltd.

This User Manual is not to be copied by any group or person in any manner

without the consent of Inspur Group Co., Ltd. The Inspur Group Co., Ltd. reserves the

right of revising this manual momentarily.

Any alteration about the content of this manual will not be informed.

Please contact Inspur Group Co., Ltd. if you have any questions or advice about

this manual.

Inspur Group Co., Ltd.

February, 2012

“Inspur” is registered trademark of the Inspur Group Co., Ltd.

Other trademarks belong to other corresponding registered companies.

Statements

Please read the following statements before you use this server. Only when you

have read this statement hereinafter and agreed the following terms, you can formally

use this server. If you have any questions about the following terms, please contact our

supplier or us directly. If you have no questions about these terms and start to use this

server, it acquiesces that you have agreed the following terms.

1. We must call your attention that you must not alter any other parameters in

the motherboard BIOS of this server at any time, except for the parameters which we

promote that you can alter.

2. If there are any hardware problems when you use this server, or you wish to

upgrade the hardware, please feed back the detailed hardware configuration of your

server to our Customer Service. Don’t disassemble the server case or any hardware

components in the case by yourself.

3. In this server, the MEMORY, CPU, CPU Fan, Fan, Hard Disk Bracket, Hard

Disk and so on are all in given standard. Please don’t use them together with the

corresponding components of any other computers.

4. When you have any software problems during the application of this server,

we hope that you ﬁrstly contact the corresponding software supplier and then he will

for the software problems about the installation and operation of the database, network

management software or other networking products.

5. Please read carefully our user manual before you use Inspur Yingxin server.

6. We must call your attention that in the application process you should pay

attention to doing necessary backup of your ﬁle.

7. This is a Grade A product, and this product may cause radio jamming. In this

case, users need to adopt feasible measures to the interference.

8. When the product is out of use, please do not dispose it with other wastes.

Considering the safe and green recycle utilization and humankind benefit, the user

should refer to retailers or local government departments for the related disposal

method and locations.

9. The copyright of the marks and names of all the software and hardware

products involved in this manual is reserved by the relevant companies.

10. In the statements above, “us” indicates Inspur Group Co., Ltd; Inspur Group

Co., Ltd. holds the right of ﬁnal explanation about the above statements.

Regarding the Manual

Chapter One Safety Information

In this chapter, safety information regarding server usage is introduced.

Chapter Two Product Description

In this chapter, the technical characteristics, appearance characteristics and I/O

interface technical speciﬁcation of this server are introduced.

Chapter Three System Setup

In this chapter, the setup of jumper wire and the system BIOS of this server is

introduced.

Chapter Four SATA RAID Setup

In this chapter, how to set up the onboard SATA RAID is introduced.

Chapter Five Operating System Installation

In this chapter, how to install the prevailing operating systems to the server is

introduced.

Chapter Six Common Problem and Trouble-shooting

In this chapter, solutions of some common problems are introduced.

We suggest you read this manual seriously before you use this server for sake of

the unnecessary faults in your operation.

Address: No.1036 Langchao Road, Jinan City, China ( Inspur Group Co., Ltd.)

Postcode: 250101

Content

Chapter One Safety Information.........................................................................1

Chapter Two Product Description.......................................................................6

2.1 Server Technical Speciﬁcation .................................................................6

2.2 Front Panel Introduction ..........................................................................8

2.3 Back Panel Introduction...........................................................................9

Chapter Three System Setup ...............................................................................11

3.1 Motherboard BIOS Setup.........................................................................11

3.2 System Jumper .........................................................................................18

Chapter Four SATA RAID Setup ........................................................................21

4.1 How to Enter the Conﬁguration Interface of SATA HostRaid .................21

4.2 Control Key Application ..........................................................................21

4.3 SATA HostRaid Conﬁguration .................................................................21

Chapter Five Operating System Installation......................................................25

5.1 Application Instructions for Inspur Driver U Disk ..................................26

5.2 Manually Install Windows Server 2003 Enterprise Edition.....................30

5.3 Manually Install Windows Server 2008 Enterprise Edition.....................36

5.4 Manually Install Red Hat Enterprise Linux 5.2 .......................................40

Chapter Six Common Problems and Trouble-shooting.....................................45

6.1 Restarting the Server ................................................................................45

6.2 Problems When Starting the Machine......................................................45

6.3 Machine Alarm.........................................................................................48

6.4 Additional Notes.......................................................................................48

6.5 Technical Support Information.................................................................49

Chapter One Safety Information

Warning: the following warnings show that there are potential dangers

that may cause property loss, personal injury or death:

Warning 1: The power supply equipment in the system may generate high

voltage and dangerous electrical energy and thus cause personal injury. Please do

not dismount the cover of the host or to dismount and replace any component in

the system by yourself, unless otherwise informed by Inspur; only maintenance

technicians trained by Inspur have the right to disassemble the cover of the host,

dismount and replace the internal components.

Warning 2: Please connect the equipment to appropriate power supply, and

the power should be supplied by external power supply which is indicated on the

rated input label. To prevent your equipment from damages caused by momentary

spike or plunge of the voltage, please use relevant voltage stabilizing equipment or

uninterruptible power supply equipment.

Warning 3: If extended cables are needed, please use the three-core cables

matched with correct earthed plug, and check the ratings of the extended cables to

make sure that the sum of rated current of all products inserted into the extended

cables do not exceed 80% of the limits of the rated currents of the extended cables.

Warning 4: Please be sure to use the supplied power supply component, such

as power lines, power socket (if supplied with the equipment) etc.. For the safety of

equipment and the user, do not replace randomly power cables or plugs.

Warning 5: To prevent electric shock dangers caused by leakage in the

system, please make sure that the power cables of the system and peripheral

equipment are correctly connected to the earthed power socket. Please connect the

three-core power line plug to the three-core AC power socket that is well earthed

and easy to access, be sure to use the earthing pin of power lines and do not use

the patch plug or the earthing pin unplugged with cables. In case of the earthing

conductors not installed and it is uncertain whether there are appropriate earthing

protections, please do not operate or use the equipment. Contact and consult with

！

Chapter One Safety Information

the electrician, please.

Warning 6: To avoid short circuit of internal components and ﬁre or electric

shock hazards, please do not ﬁll any object into the open pores of the system.

Warning 7: Please place the system far away from the cooling plate and at

the place with heat sources, and be sure not to block the air vents.

Warning 8: Be sure not to scatter food or liquid in the system or on other

components, and do not use the product in humid and dusty environment.

Warning 9: The replacement of batteries with those of another model may

cause explosion. When replacement of batteries is required, please consult ﬁrst the

manufacturer and choose batteries of the same or a similar model recommended

by the manufacturer. Do not dismount, extrude and pink the batteries or make the

external connection point short circuit, and do not expose them in the environment

over 60°C. Never throw them into ﬁre or water. Please do not try to open or repair

the batteries, and be sure to reasonably deal with the flat batteries and do not

put the ﬂat batteries, the circuit boards that may include the batteries and other

components with other wastes. For relevant battery recovery, please contact the

local waste recovery and treatment mechanism.

If what you bought is the chassis, besides carefully read the installation

description attached with the cabinet products and get known about the special

warning notices and installation process, you must abide by the following

preventive measures to guarantee the cabinet to be stable and safe:

Warning 10: Before installing equipment in the chassis, please install front

and side supporting feet on the independent chassis; for cabinet connecting with

other chassis, it shall install the front supporting foot ﬁrst. If you fail to install

correspondingly the supporting foot before installing equipment in the chassis,

it may cause the cabinet to turn over in some cases, and thus may cause personal

injury. Therefore, it is necessary to install supporting feet before installing

equipment in the chassis. After installing the equipment and other components in

the chassis, it can only pull out one component from the cabinet through its sliding

component at one time. Pulling out several components at the same time may lead

the cabinet to turn over and cause serious personal injury.

Warning 11: Please do not move the chassis. Considering the height and

weight of the chassis, at least two people are needed to complete its movement.

Chapter One Safety Information

Warning 12: Declaration

The product is Grade A product, and in the living environment, it may cause

radio interference. In such case, it may need the user to take feasible measures for

the interference.

Notes: in order to help you use the equipment, the following considerations can

help avoid the occurrence of problems that may damage the components or cause data

loss:

1. In case of the following cases, please unplug the power line plug of products

from the power socket and contact the customer service department of Inspur:

- The power cables, extended cables or power plugs are damaged.

- The products get wet by water.

- The products have fallen off or been damaged.

- Objects fall into the products.

- When operating according to the operation instructions, the products cannot

function normally.

2. If the system becomes damp, please treat it according to the following steps:

- Switch off the power supplies of the system and the equipment, disconnect them

with the power socket, wait for 10 to 20 minutes, and then open the cover of the host.

- Move the equipment to the ventilation place to dry the system at least for 24

hours and make sure that the system is fully dried.

- Close the cover of the host, re-connect the system to the power socket, and then

start the equipment.

- In case of operation failure or abnormal situation, please contact Inspur and get

technical support.

3. Pay attention to the position of the system cables and power cables, wire them

in places not to be stepped on or knocked down and ensure not to place other objectives

on the cables.

4. Before dismounting the cover of host or contacting the internal components,

you shall cool down the equipment first; to avoid damaging the main-board, please

power off the system and wait for 5 seconds, and then dismount the components from

the main-board or disconnect the connection of peripheral equipment of the system.

5. If there are modulator-demodulator, telecommunication or local area network

options in the equipment, please pay attention to the following matters:

Chapter One Safety Information

-In case of thunder and lightning weather, please do not connect or use the

modulator-demodulator. Otherwise, it may be subject to lightning strike.

- Never connect or use modulator-demodulator in moist environment.

- Never insert the modulator-demodulator or telephone cables to the socket of

network interface controller (NIC).

-Before unpacking the product package, contacting or installing internal

components or contacting un-insulated cables or jacks of the modulator-demodulator,

please disconnect the modulator-demodulator cables.

6. In order to prevent the electrostatic discharge from damaging the electronic

components in the equipment, please pay attention to the following matters:

- You shall conduct off the static electricity on the body before dismounting or

contacting any electronic component in the equipment. You can conduct off the static

electricity on the body by contacting the metal earthing objects (such as the unpainted

metal surface on the chassis) to prevent the static electricity on the body from

conducting itself to the sensitive components.

- For electrostatic sensitive components not ready to be installed for application,

please do not take them out from the antistatic package materials.

- During the work, please touch the earthing conductor or the unpainted metal

surface on the cabinet regularly to conduct off the static electricity on the body that

may damage the internal components.

7. When dismounting the internal components with the approval of Inspur, please

pay attention to the following matters:

- Switch off the system power supply and disconnect the cables, including

disconnecting any connection of the system. When disconnecting the cables, please

grab the connector of cables and plug it out, and never pull the cables.

- Before dismounting the cover of cabinet or touching the internal components,

the products need to be cooled down.

- Before dismounting and touching any electronic component in the equipment,

you shall conduct off the static electricity on the body by touching the metal earthing

objectives.

- During the dismounting process, the operation shall not be too big, so as to

prevent damage to the components or scratching of the arms.

- Carefully deal with the components and plug-in cards, and please never touch

Chapter One Safety Information

the components or connection points on the plug-in cards. When taking the plug-in

cards or components, you should grab the edges of the plug-in cards or components or

their metal ﬁxed supports.

8. During the process of cabinet installation and application, please pay attention

to the following matters:

- After the installation of cabinet is ﬁnished, please ensure that the supporting feet

have been ﬁxed to the rack and supported to the ground, and all weight of the rack have

been fell onto the ground.

- It shall install into the cabinet according to the sequences from the bottom to the

top, and ﬁrst install the heaviest component.

- When pulling out the components from the cabinet, it shall apply force slightly

to ensure the cabinet to keep balance and stabilization.

- When pressing down the release latch of the sliding rail of components and

sliding in or out, please be careful, as the sliding rail may hurt your ﬁgures.

- Never make the AC power branch circuit in the cabinet overload. The sum of

cabinet load shall not exceed 80% of the ratings of branch circuits.

- Ensure that components in the cabinet have good ventilation.

- When repairing components in the cabinet, never step on any other components.

Inhaltsverzeichnis

Andere Inspur Server Handbücher

Inspur

Inspur NF3120M5 Bedienungsanleitung

Inspur

Inspur NF5486M5 Bedienungsanleitung

Inspur

Inspur NF5266M5 Bedienungsanleitung

Inspur

Inspur NF5266M5 Bedienungsanleitung

Inspur

Inspur Yingxin Bedienungsanleitung

Inspur

Inspur NF5486M5 Bedienungsanleitung

Inspur

Inspur Yingxin Bedienungsanleitung

Inspur

Inspur NF3120M5 Bedienungsanleitung

Inspur

Inspur NF8260M6 Bedienungsanleitung

Inspur

Inspur 3408 Series Merkblatt

Inspur

Inspur NF5280M5 Bedienungsanleitung

Inspur

Inspur NX5460M4 Bedienungsanleitung

Inspur

Inspur NF8380M5 Bedienungsanleitung

Inspur

Inspur OS Bedienungsanleitung

Inspur

Inspur NF8480M5 Bedienungsanleitung

Inspur

Inspur i24 Bedienungsanleitung

Inspur

Inspur NE5260M5 Bedienungsanleitung

Inspur

Inspur NF3180A6 Bedienungsanleitung

Inspur

Inspur NF5180M5 Bedienungsanleitung

Inspur

Inspur NF5280M5 Bedienungsanleitung

Inspur

Inspur Yingxin NF5280M2 Bedienungsanleitung

Inspur

Inspur NX8840 Bedienungsanleitung

Inspur

Inspur NF5270M3 Bedienungsanleitung

Inspur

Inspur Tiansuo TS860 Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung