Intel PRO/1000 T Bedienungsanleitung

A76139-001

Quick Installation Guide

Intel®PRO/1000 T

Full Manual

on CD.

See inside

for details.

IP Storage Adapter

Bringing Gigabit Ethernet to Network Storage

Support:

http://support.intel.com

Network Products:

http://www.intel.com/network/connectivity

Intel Corporation

5200 N.E. Elam Young Parkway

Hillsboro, OR 97124-6497

Intel Corporation assumes no responsibility for errors

or omissions in this document. Nor does Intel make any

commitment to update the information contained

herein.

* Other product and corporate names may be

trademarks of other companies and are used only for

explanation and to the owners’ benefit, without intent

to infringe.

2Intel®PRO/1000 T IP Storage Adapter Quick Installation Guide

Additional Information

Online User Configuration Guide

The full User Configuration Guide is located on the Intel®PRO/1000 T IP

Storage Adapter CD. Use your web browser to view or print topics from

the User Configuration Guide. The guide covers additional configuration

topics and SAN configuration instructions. To view the guide, put the CD

in your drive and wait for the Autorun screen to display. Click the User

Configuration Guide button to access the information.

Online Services

You can use the Internet to download software updates, troubleshooting

tips, installation notes, and more. Online services are on the World Wide

Web at: http://support.intel.com

Late-Breaking News

Look for the Late-Breaking News document in the box. This document

provides useful information about adapter compatibility as well as

special installation release notes that were not available at the time the CD

was created.

Legal Disclaimers

Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497

Intel Corporation assumes no responsibility for errors or omissions in this document. Nor

does Intel make any commitment to update the information contained herein.

* Other names and brands may be claimed as the property of others.

Intel is a trademark or registered trademark of Intel Corporation or its subsidiaries in the

United States and other countries.

QuickInstallGuide.fm Page 2 Tuesday, February 12, 2002 11:21 AM

Intel®PRO/1000 T IP Storage Adapter Quick Installation Guide 3

Contents

Additional Information ....................................... 2

Legal Disclaimers and Copyright............................... 2

HowtoUseThisGuide...................................... 3

SystemRequirements ...................................... 4

InsertingtheAdapterintheComputer .......................... 5

AttachingtheNetworkCable ................................. 6

Installing/Uninstalling the Drivers and Updating Driver Information . . . . 7

BasicConfigurationInformation.............................. 13

Basic Troubleshooting ..................................... 16

Adapter Specifications ..................................... 17

Intel Automated Customer Support ........................... 18

How to Use This Guide

The Intel® PRO/1000 T IP Storage Adapter allows companies to build

cost-effective Storage Area Networks (SANs) using standard LAN/

Ethernet infrastructure. It uses the new, open iSCSI standard to transmit

SCSI storage data over native Ethernet networks, dramatically lowering the

total cost of ownership for storage networks while still offering increased

reliability, availability, scalability, and manageability of stored data. This

adapter is designed to optimize PCI server bus architecture with 66 MHz/

64-bit performance for high-end storage environments, and connects

devices located anywhere on an Ethernet network.

This Quick Installation Guide provides information on how to install the

PRO/1000 T IP Storage Adapter, how to download Windows and Linux

drivers, and basic adapter configuration information. For complete details

on adapter configuration and maintenance, refer to the PRO/1000 T IP

Storage Adapter User Configuration Guide on the CD-ROM.

QuickInstallGuide.fm Page 3 Tuesday, February 12, 2002 11:21 AM

4Intel®PRO/1000 T IP Storage Adapter Quick Installation Guide

System Requirements

Before installing the Intel PRO/1000 T IP Storage Adapter, check your

system for the following minimum configuration requirements:

• One open 32-bit or 64-bit bus master PCI slot

•64MBofsystemmemory

•ThelatestBIOSforyourcomputer

• Microsoft Windows*^ 2000 (SP2 or later), Windows NT*^ 4.0 (SP 6 or

later), Linux Red Hat* version 7.1 (2.4 kernel)

• Category 5, twisted-pair cabling for 100/1000 Mbps operation, and an

802.3ab-compliant gigabit switch such as the Intel® NetStructure™

480T switch. For best results at 1000 Mbps, use CAT 5e cabling.

^You can download the necessary software patches from Microsoft (see below).

Microsoft Service Packs

Visit the following Microsoft web site for the latest Service Pack

information. If this site has changed, go to the main Microsoft site and

search for the term, “Service Pack.”

http://www.microsoft.com/ntserver/

QuickInstallGuide.fm Page 4 Tuesday, February 12, 2002 11:21 AM

Intel®PRO/1000 T IP Storage Adapter Quick Installation Guide 5

Inserting the Adapter in the Computer

1. Turn off and unplug your computer if it is not a Hot Plug system. For

Hot Plug servers, see your server’s documentation.

2. Remove the cover from the computer.

WARNING: Turn off and unplug the computer before remov-

ing the computer cover. Failure to do so could endanger you

and may damage the adapter or computer.

3. Remove the cover bracket from the 32-bit or 64-bit PCI bus master

slot. A 64-bit slot should be used whenever possible. In a 32-bit PCI

slot, the end of the edge connector will be exposed and not connected.

Make sure the exposed end does not contact any conducting part of the

motherboard (see Figure 1).

NOTE: The NIC cards in the PCI bus slots in Figure 1 are for illustration

purposes only to show ease of installation. The actual PRO/1000

T IP Storage Adapter card is longer and contains more compo-

nents than the NICs depicted in Figure 1.

Figure 1. Adapter card being inserted in PCI bus master slots

4. Press the adapter into the slot until the adapter is firmly seated. Secure

the adapter bracket.

5. Repeat steps 3 and 4 for each adapter you want to install.

6. Replace the computer cover and plug in the power cord.

7. Turn the power on. The computer PCI BIOS automatically assigns

resources to the adapter(s). If you receive a PCI configuration error, see

“Troubleshooting” in the User Configuration Guide on the CD.

PC-3899

ISA Slot 32-bit PCI Slot

64-bit Slot

QuickInstallGuide.fm Page 5 Tuesday, February 12, 2002 11:21 AM

6Intel®PRO/1000 T IP Storage Adapter Quick Installation Guide

Attaching the Network Cable

RJ-45 Adapter

Insert the Category 5 twisted pair RJ-45 network cable into the adapter

connector, as shown in Figure 2.

Figure 2. RJ-45 network cable being inserted into an adapter connector

For 1000Base-T or 100Base-TX, you must use Category 5 network cable

(four twisted-pair wiring). If you plan to run the adapter at 1000 Mbps, it

must be connected to a compatible 1000 Mbps switch.

NOTE: Most compatible switches do not support all three speeds

(10/100/1000) on a single port. Refer to the switch documenta-

tion for details.

For 10Base-T, use Category 3, 4, or 5 twisted-pair wiring. Residential

environments require the use of a Category 5 cable.

QuickInstallGuide.fm Page 6 Tuesday, February 12, 2002 11:21 AM

Intel®PRO/1000 T IP Storage Adapter Quick Installation Guide 7

Installing the Drivers

Driver installation procedures are included for Windows 2000, Windows

NT 4.0, and Linux Red Hat Version 7.1. You can also install drivers from

the accompanying CD.

Windows* 2000

After you install the PRO/1000 T IP Storage Adapter in the computer,

connect the cable, plug in the power cord, and start the computer. Windows

will detect the new PCI device and display the Found New Hardware

dialog box, and start the Found New Hardware Wizard.

Using the Wizard, follow this procedure to install the correct driver.

1. Insert the PRO/1000 T IP Storage Adapter CD in the CD-ROM drive.

If the CD autorun program starts, close this window at this time.

2. On the Wizard Welcome screen, click on “Next” to start.

3. On the next screen, choose the “Search for a Suitable Driver” option,

and click on “Next.”

4. Click on the CD-ROM box only on the Locate Driver screen, and

clickon“Next.”

5. After a few moments, the Search Results will indicate a driver was

found on the CD. Click on “Next” to continue.

6. The “Digital Signature Not Found” screen will display. This screen

will be deleted when Microsoft certification has been obtained. Click

on “Yes”.

7. The necessary files will then be copied to the computer. The Wizard

displays a “Completing the Found New Hardware Wizard” message.

Clickon“Finish.”

8. Navigate to Start/Settings/Control Panel.

9. Double-click on the “Intel® PROSet for IP Storage” icon to begin the

configuration process. Refer to the online User Configuration Guide

on the CD to complete the configuration process.

Windows NT* 4.0

The SAN driver supports Windows NT 4.0 servers and workstations. This

driver does not support Windows 95, 98, ME, NT 3.51 or earlier versions

of NT.

NOTE: Prior to installation, review the Service Pack requirements in the

System Requirements section. If your NT install does not

include it, apply Service Pack 6, which can be downloaded from

Microsoft.com

QuickInstallGuide.fm Page 7 Tuesday, February 12, 2002 11:21 AM

8Intel®PRO/1000 T IP Storage Adapter Quick Installation Guide

Follow this procedure to install the driver:

1. Insert the CD-ROM into the drive. If the CD autorun program starts,

close this window at this time.

2. In the Control Panel, double-click on the “SCSI Adapters” icon.

3. From the next screen, select the “Drivers” tab, click on “Add” (the

popup message “Creating Driver List” will display).

4. On the next screen, click on “Have Disk” and next to the “Copy files

from” field, click on “Browse” or type the path to your CD-ROM

drive in the dialog box, and click OK (for example: “<CD-ROM

drive>\drivers\NT4”). Follow the instructions to install the drivers.

When the adapter is added, it appears in the SCSI adapters list.

5. Click “OK”.

6. Navigate to Start/Settings/Control Panel.

7. Double-click on the “Intel® PROSet for IP Storage” icon to begin the

configuration process. Refer to the online User Configuration Guide

on the CD to complete the configuration process.

NOTE: Once the external drive (or drives) has been connected and for-

matted with driver letter assigned, subsequent system reboots

will cause the drive connection to vary; for example, on W2K, the

drive letter is automatically assigned, but on NT4, you will need

to run the Disk Administrator and assign the drive letter to

access the iSCSI target(s).

Linux Red Hat* Version 7.1

1. Place the Intel PRO/1000 T IP Storage Adapter CD in the appropriate

drive. To install drivers for Linux Red Hat Version 7.1, you can use the

Gnome RPM GUI tool, as shown in Figure 3.

Figure 3. Gnome RPM GUI Tool

2. Click on the Packages folder to open subfolders and view contents.

QuickInstallGuide.fm Page 8 Tuesday, February 12, 2002 11:21 AM

Intel®PRO/1000 T IP Storage Adapter Quick Installation Guide 9

3. Click on the Install button on the Gnome RPM applet window (in the

toolbar in Figure 3). The Install popup screen will display as shown in

Figure 4.

Figure 4. Install Popup Screen

4. Click on the Add button, which will pop up the screen shown in Figure

5. Highlight the specific package you want to install (the “is1000-1.0-

1.i386.rpm” package has been highlighted) and click on the Add

button. The screen shown in Figure 6 will display.

Figure 5. Add Packages screen

QuickInstallGuide.fm Page 9 Tuesday, February 12, 2002 11:21 AM

10 Intel®PRO/1000 T IP Storage Adapter Quick Installation Guide

5. Select the package and click on the Install button at the bottom of the

screen.

Figure 6. Install Window Showing Selected RPM Package

6. After installation, you can view the files in the RPM package that were

installed by following this procedure:

a. View the Gnome RPM window

b. Expand the System folder

c. Open the SCSI subfolder

d. Highlight the installed RPM package icon

e.ClickontheQuerybuttonatthetopofthescreen

A pop-up screen (such as that shown within Figure 7) displays the

installed files as a result of that query.

QuickInstallGuide.fm Page 10 Tuesday, February 12, 2002 11:21 AM

Andere Handbücher für PRO/1000 T

Inhaltsverzeichnis

Andere Intel Adapter Handbücher

Intel

Intel 600SM Bedienungsanleitung

Intel

Intel Ethernet X520 10GbE Dual Port KX4 Mezz Bedienungsanleitung

Intel

Intel PRO/1000 T Bedienungsanleitung

Intel

Intel INTEL 10 GIGABIT AT2 SERVER ADAPTER Bedienungsanleitung

Intel

Intel Vectra VEi7 Bedienungsanleitung

Intel

Intel PRO/1000 PF Referenzhandbuch

Intel

Intel I350 Bedienungsanleitung

Intel

Intel 2011B - PRO/Wireless LAN Enterprise Access... Bedienungsanleitung

Intel

Intel 10 Gigabit AT Ethernet Server Adapter Referenzhandbuch

Intel

Intel ETHEREXPRESS PRO/100 Bedienungsanleitung

Intel

Intel X520 SFP+ Bedienungsanleitung

Intel

Intel CentrUser's Guideino Advanced-N + WiMAX 6250 Bedienungsanleitung

Intel

Intel NUC CEC Bedienungsanleitung

Intel

Intel WM3B2100 Bedienungsanleitung

Intel

Intel X540-T2 Bedienungsanleitung

Intel

Intel PRO 1000 PT DESKTOP ADAPTER Bedienungsanleitung

Intel

Intel PRO1000 - MT Dual Port Server Adapter Bedienungsanleitung

Intel

Intel QLE7342 Bedienungsanleitung

Intel

Intel Centrino Ultimate-N 6300 Betriebsanleitung

Intel

Intel PRO/Wireless 5000 Bedienungsanleitung

Intel

Intel PRO/Wireless 2011B LAN USB Device Installations- und Betriebshandbuch

Intel

Intel X520-T2 Referenzhandbuch

Intel

Intel RSP3TD160 Installationshandbuch

Intel

Intel WPC2011BWW - PRO/Wireless 2011B LAN PC Card Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung