Intel SR1530CL - Server System - 0 MB RAM Bedienungsanleitung

Intel® Server System SR1530CL /

SR1530HCL / SR1530HCLS User Guide

A Guide for Technically Qualified Assemblers of Intel® Identified Subassemblies/Products

Intel Order Number D68456-003

ii Intel® Server System SR1530CL / SR1530HCL / SR1530HCLS

Disclaimer

Information in this document is provided in connection with Intel® products. No license, express or implied, by

estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Intel's

Terms and Conditions of Sale for such products, Intel assumes no liability whatsoever, and Intel disclaims any

express or implied warranty, relating to sale and/or use of Intel products including liability or warranties relating to

fitness for a particular purpose, merchantability, or infringement of any patent, copyright or other intellectual property

right. Intel products are not designed, intended or authorized for use in any medical, life saving, or life sustaining

applications or for any other application in which the failure of the Intel product could create a situation where

personal injury or death may occur. Intel may make changes to specifications and product descriptions at any time,

without notice.

Intel server boards contain a number of high-density VLSI and power delivery components that need adequate

airflow for cooling. Intel's own chassis are designed and tested to meet the intended thermal requirements of these

components when the fully integrated system is used together. It is the responsibility of the system integrator that

chooses not to use Intel developed server building blocks to consult vendor datasheets and operating parameters to

determine the amount of airflow required for their specific application and environmental conditions. Intel Corporation

can not be held responsible if components fail or the server board does not operate correctly when used outside any

of their published operating or non-operating limits.

Intel, Intel Pentium, and Intel Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in

the United States and other countries.

* Other names and brands may be claimed as the property of others.

Intel® Server System SR1530CL / SR1530HCL / SR1530HCLS iii

Safety Information

Important Safety Instructions

Read all caution and safety statements in this document before performing any of the

instructions. See also Intel Server Boards and Server Chassis Safety Information on the

Intel®Server Deployment Toolkit 2.0 CD and/or at http://support.intel.com/support/

motherboards/server/sb/cs-010770.htm.

Wichtige Sicherheitshinweise

Lesen Sie zunächst sämtliche Warnund Sicherheitshinweise in diesem Dokument, bevor

Sie eine der Anweisungen ausführen. Beachten Sie hierzu auch die Sicherheitshinweise zu

Intel-Serverplatinen und Servergehäusen auf der Intel®Server Deployment Toolkit 2.0 CD

oder unter http://support.intel.com/support/motherboards/server/sb/cs-010770.htm.

Consignes de sécurité

Lisez attention toutes les consignes de sécurité et les mises en garde indiquées dans ce

document avant de suivre toute instruction. Consultez Intel Server Boards and Server

Chassis Safety Information sur le Intel®Server Deployment Toolkit 2.0 CD ou bien

rendez-vous sur le site http://support.intel.com/support/motherboards/server/sb/cs-

010770.htm.

Instrucciones de seguridad importantes

Lea todas las declaraciones de seguridad y precaución de este documento antes de realizar

cualquiera de las instrucciones. Vea Intel Server Boards and Server Chassis Safety

Information en el Intel®Server Deployment Toolkit 2.0 CD y/o en http://

support.intel.com/support/motherboards/server/sb/cs-010770.htm.

iv Intel® Server System SR1530CL / SR1530HCL / SR1530HCLS

重要安全指导

在执行任何指令之前，请阅读本文档中的所有注意事项及安全声明。和/或

http://support.intel.com/support/motherboards/server/sb/CS-010770.htm

上的 Intel

Server Boards and Server Chassis Safety Information（《Intel

服务器主板与服务器机箱安全信息》）。

Intel® Server System SR1530CL / SR1530HCL / SR1530HCLS v

Warnings

Heed safety instructions: Before working with your server product, whether you are

using this guide or any other resource as a reference, pay close attention to the safety

instructions. You must adhere to the assembly instructions in this guide to ensure and

maintain compliance with existing product certifications and approvals. Use only the

described, regulated components specified in this guide. Use of other products /

components will void the UL listing and other regulatory approvals of the product and

will most likely result in noncompliance with product regulations in the region(s) in which

the product is sold.

System power on/off: The power button DOES NOT turn off the system AC power. To

remove power from system, you must unplug the AC power cord from the wall outlet.

Make sure the AC power cord is unplugged before you open the chassis, add, or remove

any components.

Hazardous conditions, devices and cables: Hazardous electrical conditions may be

present on power, telephone, and communication cables. Turn off the server and

disconnect the power cord, telecommunications systems, networks, and modems attached

to the server before opening it. Otherwise, personal injury or equipment damage can

result.

Electrostatic discharge (ESD) and ESD protection: ESD can damage disk drives,

boards, and other parts. We recommend that you perform all procedures in this chapter

only at an ESD workstation. If one is not available, provide some ESD protection by

wearing an antistatic wrist strap attached to chassis ground any unpainted metal surface on

your server when handling parts.

ESD and handling boards: Always handle boards carefully. They can be extremely

sensitive to ESD. Hold boards only by their edges. After removing a board from its

protective wrapper or from the server, place the board component side up on a grounded,

static free surface. Use a conductive foam pad if available but not the board wrapper. Do

not slide board over any surface.

Installing or removing jumpers: A jumper is a small plastic encased conductor that slips

over two jumper pins. Some jumpers have a small tab on top that you can grip with your

fingertips or with a pair of fine needle nosed pliers. If your jumpers do not have such a tab,

take care when using needle nosed pliers to remove or install a jumper; grip the narrow

sides of the jumper with the pliers, never the wide sides. Gripping the wide sides can

damage the contacts inside the jumper, causing intermittent problems with the function

controlled by that jumper. Take care to grip with, but not squeeze, the pliers or other tool

you use to remove a jumper, or you may bend or break the pins on the board.

vi Intel® Server System SR1530CL / SR1530HCL / SR1530HCLS

Intel® Server System SR1530CL / SR1530HCL / SR1530HCLS vii

Preface

About this Manual

Thank you for purchasing and using the Intel® Server System SR1530CL / SR1530HCL /

SR1530HCLS.

This manual is written for system technicians who are responsible for troubleshooting,

upgrading, and repairing this server system. This document provides reference

information, feature information, and step by step instructions on how to add and replace

components on the server system. For the latest version of this manual, see http://

support.intel.com/support/motherboards/server/chassis/S5000VCL/.

Manual Organization

Chapter 1 provides an overview of the server system. In this chapter, you will find a list of

the server system features, illustrations of the product, and product diagrams to help you

identify components and their locations.

Chapter 2 provides instructions on using the utilities that are shipped with the board or

that may be required to update the system. This includes how to navigate through the

BIOS Setup screens, how to perform a BIOS update, and how to reset the password or

CMOS. Information about the specific BIOS settings and screens is available in the Intel®

Server Board S5000VCL Technical Product Specification. See “Server System

References” on page ix for a link to the Technical Product Specification.

Chapter 3 provides instructions on adding and replacing components. Use this chapter for

step-by-step instructions and diagrams for installing or replacing components such as the

fans, power supply, drives, and other components.

At the back of this manual, you will find technical specifications, troubleshooting

information, complete safety information, regulatory information, "getting help"

information, and the warranty.

viii Intel® Server System SR1530CL / SR1530HCL / SR1530HCLS

Product Contents

The Intel® Server System SR1530CL / SR1530HCL / SR1530HCLS ships with the Intel®

Server Board S5000VCL.

Intel®Server System Contents

Your Intel® Server System SR1530CL / SR1530HCL / SR1530HCLS ships with the

following items:

•One Intel®Server Board S5000VCL, installed in the server system

•One 400-watt power supply module, installed in the server system

•One low-profile riser, installed in the server system

•Two system blowing fans, with attached cables, installed in the server system

•(SR1530CL) One PCI cooling fan

•(SR1530HCL) One PCI cooling baffle

•(SR1530CL) One hard disk drive 0 bracket

•(SR1530CL) One hard disk drive 1 bracket

•One slimline optical drive installation kit, in the server system product box

•(SR1530CL) Screws:

— 24 6-32 flat-head screws for attaching the slimline optical drive and hard disk

drives to the chassis, and for attaching hard disk drives to the hard disk drive

brackets

— One 6-32 pan-head screw for the hard disk drive attached to the chassis

— Four M1.5 screws for attaching the brackets to the slimline optical drive

— Two M2 screws for attaching the interposer board to the slimline optical drive

•(SR1530HCL) Screws:

— 24 6-32 flat-head screws for attaching the hard disk drives to the drive carriers

— Two M1.5 screws for attaching the bracket to the slimline optical drive

— Two M2 screws for attaching the interposer board to the slimline optical drive

•Rack handles, in the server system product box

•One control panel, installed in the server system

•One rail kit, in a separate box

•One CD kit

•One Quick Start User’s Guide

•One Attention document

Intel® Server System SR1530CL / SR1530HCL / SR1530HCLS ix

•(SR1530CL) Cables:

— Two SATA cables, in the server system product box

— One IDE cable, in the server system product box

— One front panel cable, installed in the server system

•(SR1530HCL) Cables

— Three SAS/SATA cables, installed in the system

— One IDE cable, in the server system product box

— One front panel cable, installed in the server system

— One USB front panel cable, installed in the server system

— One SGPIO cable, installed in the server system

Server System References

If you need more information about this product or information about the accessories that

can be used with this server system, use the following resources.

For this Information or

Software Use this Document or Software

Technical information

about the server chassis,

including sub-system

overviews and

mechanical drawings

Intel®Server Chassis SR1530 Technical Product Specification

Found at: http://support.intel.com/support/motherboards/server/

S5000VCL/

Technical information

about the server board,

including board layout,

connector pin-outs, timing

information, mechanical

drawings and LED

information

Intel®Server Board S5000VCL Technical Product Specification

Found at: http://support.intel.com/support/motherboards/server/

S5000VCL/

If you just received this

product and need to

install it

Intel® Server System SR1530CL / SR1530HCL / SR1530HCLS

Quick Start User's Guide

Found in the product box

Accessories or other Intel

server products Spares and Configuration Guide

Found at: available from your Intel field representative or on the

Server Configurator Tool at http://indigo.intel.com/

serverconfiguratortool/default.aspx

Hardware (peripheral

boards, adapter cards)

and operating systems

that have been tested with

this product

Tested HardwareOperating Systems List

Found at: http://support.intel.com/support/motherboards/server/

S5000VCL/

x Intel® Server System SR1530CL / SR1530HCL / SR1530HCLS

For software to manage

your Intel®server Intel®System Management

Found at: http://support.intel.com/support/motherboards/server/

S5000VCL/

For diagnostics test

software Diagnostics

Found at: http://support.intel.com/support/motherboards/server/

S5000VCL/

For this Information or

Software Use this Document or Software

Andere Handbücher für SR1530CL - Server System - 0 MB RAM

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Intel Server Handbücher

Intel

Intel SR1600UR - Server System - 0 MB RAM Bedienungsanleitung

Intel

Intel MFSYS25V2 Bedienungsanleitung

Intel

Intel P4000IP Series Konfigurationshandbuch

Intel

Intel ISP4400 - Server Platform - 0 MB RAM Bedienungsanleitung

Intel

Intel M50CYP2UR Series Kurzanleitung zur Einrichtung

Intel

Intel SR1625UR - Server System - 0 MB RAM Bedienungsanleitung

Intel

Intel SBX82 - Server Compute Blade Bedienungsanleitung

Intel

Intel MFSYS35 Bedienungsanleitung

Intel

Intel R1000EP series Bedienungsanleitung

Intel

Intel GS-SR195V Benutzerhandbuch

Intel

Intel M50FCP1UR Bedienungsanleitung

Intel

Intel SR6850HW4M Bedienungsanleitung

Intel

Intel R2000BB series Bedienungsanleitung

Intel

Intel SC450NX - Server Platform - 0 MB RAM Bedienungsanleitung

Intel

Intel SR9000MK4U - Server System - 0 MB RAM Benutzerhandbuch

Intel

Intel D40AMP Series Bedienungsanleitung

Intel

Intel P4000IP Series Bedienungsanleitung

Intel

Intel SR1690WB - Server System - 0 MB RAM Bedienungsanleitung

Intel

Intel ISP1100 - Server Platform - 0 MB RAM Bedienungsanleitung

Intel

Intel SR2600UR - Server System - 0 MB RAM Bedienungsanleitung

Intel

Intel R1000EP series Bedienungsanleitung

Intel

Intel IP Network server NSI2U Bedienungsanleitung

Intel

Intel SC5650-DP Bedienungsanleitung

Intel

Intel R2000SC Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung