Intel SBXL52 - Server Compute Blade Betriebsanleitung

Intel®Server Compute Blade SBXL52:

Hardware Maintenance Manual and

Troubleshooting Guide

A Guide for Technically Qualified Assemblers of Intel®Identified Subassemblies &

Products

Order Number: C39684-003

ii SBXL52: Hardware Maintenance Manual and Troubleshooting Guide

Disclaimer

Information in this document is provided in connection with Intel. products. No license, express or implied, by estoppel or otherwise, to

any intellectual property rights is granted by this document. Except as provided in Intel's Terms and Conditions of Sale for such

products.

Intel assumes no liability whatsoever, and Intel disclaims any express or implied warranty, relating to sale and/or use of Intel products

including liability or warranties relating to fitness for a particular purpose, merchantability, or infringement of any patent, copyright or

other intellectual property right.

Intel products are not designed, intended or authorized for use in any medical, life saving, or life sustaining applications or for any

other application in which the failure of the Intel product could create a situation where personal injury or death may occur. Intel may

make changes to specifications and product descriptions at any time, without notice.

Intel, Pentium, Itanium and Intel Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United

States and other countries.

* Other names and brands may be claimed as the property of others.

iii

1 SBXL52 safety and regulatory information

✏ NOTE

The service procedures are designed to help you isolate problems. They are written with the

assumption that you have model-specific training on all computers, or that you are familiar

with the computers, functions, terminology, and service information provided in this manual.

Important Safet

Instructions

Read all caution and safety statements in this document before performing any of the

instructions. See Intel Server Boards and Server Chassis Safety Information on the

Resource CD and/or at http:\\support.intel.com.

Wichti

e Sicherheitshinweise

Lesen Sie zunächst sämtliche Warn- und Sicherheitshinweise in diesem Dokument, bevor

Sie eine der Anweisungen ausführen. Beachten Sie hierzu auch die Sicherheitshinweise

zu Intel-Serverplatinen und -Servergehäusen auf der Ressourcen-CD oder unter

http:\\support.intel.com.

重要安全指导

在执行任何指令之前，请阅读本文档中的所有注意事项及安全声明。参见 Resource

CD（资源光盘）和/或http:\\support.intel.com 上的 Intel Server Boards and Server

Chassis Safety Information（《Intel 服务器主板与服务器机箱安全信息》）。

Consignes de sécurité

Lisez attention toutes les consignes de sécurité et les mises en garde indiquées dans ce

document avant de suivre toute instruction. Consultez Intel Server Boards and Server

Chassis Safety Information sur le CD Resource CD ou bien rendez-vous sur le site

http:\\support.intel.com.

Instrucciones de seguridad importantes

Lea todas las declaraciones de seguridad y precaución de este documento antes de

realizar cualquiera de las instrucciones. Vea Intel Server Boards and Server Chassis

Safety Information en el CD Resource y/o en http:\\support.intel.com.

iv SBXL52: Hardware MaintenanceManual and TroubleshootingGuide

General Safety

Follow these rules to ensure general safety:

•Observe good housekeeping in the area of the machines during and after maintenance.

•Do not perform any action that causes hazards to the customer, or that makes the equipment

unsafe.

•Place removed covers and other parts in a safe place, away from all personnel, while you are

servicing the machine.

•Keep your tool case away from walk areas so that other people will not trip over it.

•Do not wear loose clothing that can be trapped in the moving parts of a machine. Ensure that

your sleeves are fastened or rolled up above your elbows. If your hair is long, fasten it.

Insert the ends of your necktie or scarf inside clothing or fasten it with a nonconductive clip,

approximately 8 centimeters (3 inches) from the end.

•Do not wear jewelry, chains, metal-frame eyeglasses, or metal fasteners for your clothing.

Remember: Metal objects are good electrical conductors.

•Wear safety glasses when you are: hammering, drilling soldering, cutting wire, attaching

springs, using solvents, or working in any other conditions that might be hazardous to your eyes.

•After service, reinstall all safety shields, guards, labels, and ground wires. Replace any safety

device that is worn or defective.

•Reinstall all covers correctly before returning the machine to the customer.

Electrical Safety

xxCAUTION:

Electrical current from power, telephone, and communication cables can be hazardous. To

avoid personal injury or equipment damage, disconnect the server system power cords,

telecommunication systems, networks, and modems before you open the server covers.

✏ Important: Observe the following rules when working on electrical

equipment.

•Disconnect all power before performing a mechanical inspection.

•Before you start to work on the machine, unplug the power cord. or power-off the wall box that

supplies power to the machine and to lock the wall box in the off position.

•Regularly inspect and maintain your electrical hand tools for safe operational condition.

•Do not use worn or broken tools and testers.

•Never assume that power has been disconnected from a circuit. First, check that it has been

powered-off.

•Always look carefully for possible hazards in your work area. Examples of these hazards are

moist floors, nongrounded power extension cables, power surges, and missing safety grounds.

•Do not touch live electrical circuits with the reflective surface of an inspection mirror. The

surface is conductive; such touching can cause personal injury and machine damage.

SBXL52 safety and regulatory information v

Handling electrostatic discharge-sensitive devices

Any computer part containing transistors or integrated circuits (IC) should be considered sensitive to

electrostatic discharge (ESD). END damage can occur when there is a difference in charge between

objects. Protect against ESD damage by equalizing the charge so that the server, the part, the work

mat, and the person handling the part are all at the same charge.

✏ NOTE

Use product-specific ESD procedures when they exceed the requirements noted here.

Make sure that the ESD-protective devices you use have been certified (ISO 9000) as fully

effective.

When handling ESD-sensitive parts:

•Keep the parts in protective packages until they are inserted into the product.

•Avoid contact with other people.

•Wear a grounded wrist strap against your skin to eliminate static on your body.

•Prevent the part from touching your clothing. Most clothing is insulative and retains a charge

even when you are wearing a wrist strap.

•Use the black side of a grounded work mat to provide a static-free work surface. The mat is

especially useful when handling ESD-sensitive devices.

•Select a grounding system, such as those in the following list, to provide protection that meets

the specific service requirement.

✏ NOTE

The use of a grounding system is desirable but not required to protect against ESD damage.

Attach the ESD ground clip to any frame ground, ground braid, or green-wire ground.

Use an ESD common ground or reference point when working on a double-insulated or

battery-operated system. You can use coax or connector-outside shells on these systems.

Use the round ground-prong of the AC plug on AC-operated computers.

xxCAUTION:

If your system has a module containing a lithium battery, replace it only with the same module

type made by the same manufacturer. The battery contains lithium and can explode if not

properly used, handled, or disposed of. Do not:

•Throw or immerse into water

•Heat to more than 100×C (212×F)

•Repair or disassemble

•Dispose of the battery as required by local ordinances or regulations.

xxCAUTION:

When laser products (such as CD-ROMs, DVD-ROM drives, fiber optic devices, or

transmitters) are installed, note the following:

vi SBXL52: Hardware MaintenanceManual and TroubleshootingGuide

•Do not remove the covers. Removing the covers of the laser product could result in

exposure to hazardous laser radiation. There are no serviceable parts inside the device.

•Use of controls or adjustments or performance of procedures other than those specified

herein might result in hazardous radiation exposure.

DANGER

xxCAUTION:

Hazardous energy is present when the blade is connected to the power source. Always replace

the blade cover before installing the blade.

Regulatory specifications and disclaimers

Safety compliance

USA: UL 60950 - 3rd Edition/CSA 22.2. No. 60950

Canada: cUL certified - 3rd Edition/CSA 22.2. No. 60950- for Canada (product bears the single

cUL mark for U.S. and Canada)

Europe: Low Voltage Directive, 73/23/EEC

UL/CB to EN60950 3rd Edition

International: UL/CB to IEC 60950 3rd Edition

UL/CB - EN60 950 3rd Edition

UL/CB - EMKO-TSE (74-SEC) 207/94

Australia/New

Zealand: CB Report to IEC 60950, 3rd Edition plus international deviations

Some laser products contain an embedded Class 3A or Class 3B laser diode. Note

the following:

Laser radiation when open. Do not stare into the beam, do not view directly with

optical instruments, and avoid direct exposure to the beam.

SBXL52 safety and regulatory information vii

Electromagnetic compatibility (EMC)

Electromagnetic compatibility notices (International)

Europe (CE Declaration of Conformity): This product has been tested in accordance too, and

complies with the Low Voltage Directive (73/23/EEC) and EMC Directive (89/336/EEC). The

product has been marked with the CE Mark to illustrate its compliance.

Japan EMC Compatibility:

USA: FCC CFR 47 Part 2 and 15, Verified Class A Limit

Canada: IC ICES-003 Class A Limit

Europe: EMC Directive, 89/336/EEC

EN55022, Class A Limit, Radiated & Conducted Emissions

EN55024 ITE Specific Immunity Standard

EN61000-4-2 ESD Immunity (Level 2 Contact Discharge, Level 3 Air Discharge)

EN61000-4-3 Radiated Immunity (Level 2)

EN61000-4-4 Electrical Fast Transient (Level 2)

EN61000-4-5 AC Surge

EN61000-4-6 Conducted RF

EN61000-4-8 Power Frequency Magnetic Fields

EN61000-4-11 Voltage Dips and Interrupts

Japan: VCCI Class A ITE (CISPR 22, Class A Limit)

Australia/New

Zealand: AS/NZS 3548, Class A Limit

Taiwan: BSMI Approval

Korea: RRL Approval

Russia: GOST Approved

International: CISPR 22, Class A Limit

viii SBXL52: Hardware Maintenance Manual and Troubleshooting Guide

English translation of the notice above: This is a Class A product based on the standard of the

Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this

equipment is used in a domestic environment, radio disturbance may arise. When such trouble

occurs, the user may be required to take corrective actions.

ICES-003 (Canada): Cet appareil numérique respecte les limites bruits radioélectriques

applicables aux appareils numériquesde Classe A prescritesdansla norme sur le matériel brouilleur:

"Appareils Numériques", NMB-003 édictée par le Ministre Canadian des Communications.

English translation of the notice above: This digital apparatus does not exceed the Class A limits

for radio noise emissions from digital apparatus set out in the interference-causing equipment

standard entitled "Digital Apparatus," ICES-003 of the Canadian Department of Communications.

BSMI (Taiwan): The BSMI Certification number and the following warning is located on the

product safety label which is located visibly on the external chassis.

RRL Korea:

SBXL52 safety and regulatory information ix

English translation of the notice above:

Device User’s Information

Class A device This device complies with RRL EMC and is operated

in commercial environment so that distributors or

users pay attention to this point.

If the product is sold or purchased improperly, please

exchange this product to what can be used at home.

Class B device This device complies with RRL EMC and is operated

in a residential area so that it can be used at all other

location as well as residential area.

note: Class A device: operated in a commercial area. Class B device: operated in a residential area.

x SBXL52: Hardware MaintenanceManual and TroubleshootingGuide

Inhaltsverzeichnis

Andere Intel Server Handbücher

Intel

Intel NSC2U - IP Network Server Bedienungsanleitung

Intel

Intel SPSH4 - Server Platform - 0 MB RAM Bedienungsanleitung

Intel

Intel SERVER SYSTEM SR2500AL Bedienungsanleitung

Intel

Intel ISP1100 - Server Platform - 0 MB RAM Bedienungsanleitung

Intel

Intel R1000WT Series Benutzerhandbuch

Intel

Intel S5500BC Leitfaden

Intel

Intel SR2600URLXNA Leitfaden

Intel

Intel SR1530AHLX - Server System - 0 MB RAM Bedienungsanleitung

Intel

Intel SR2400SYS - Server Platform - 0 MB RAM Bedienungsanleitung

Intel

Intel SR1695WB Bedienungsanleitung

Intel

Intel R2000LH2 Bedienungsanleitung

Intel

Intel MFSYS25V2 Bedienungsanleitung

Intel

Intel SR1550AL - Server System - 0 MB RAM Bedienungsanleitung

Intel

Intel BB5520URR Bedienungsanleitung

Intel

Intel SR6850HW4S Bedienungsanleitung

Intel

Intel P4000IP Series Konfigurationshandbuch

Intel

Intel SR1680MV - Server System - 0 MB RAM Bedienungsanleitung

Intel

Intel SR1530AHNA Konfigurationshandbuch

Intel

Intel SR1630BC - Server System - 0 MB RAM Bedienungsanleitung

Intel

Intel M50CYP2UR Series Kurzanleitung zur Einrichtung

Intel

Intel R1304BTLSFAN Einrichtungshandbuch

Intel

Intel ISP1100 - Server Platform - 0 MB RAM Bedienungsanleitung

Intel

Intel P4304SC2SFEN Bedienungsanleitung

Intel

Intel SR1500 - AXXMINIDIMM DDR-2 RAID Controller Cache... Bedienungsanleitung

Beliebte Server Handbücher anderer Marken

HP AlphaServer ES47 Bedienungsanleitung

Dell

Dell PowerEdge R410 Bedienungsanleitung

PowerNAS

PowerNAS CMA Bedienungsanleitung

Supero

Supero FatTwin F617R3-FT Bedienungsanleitung

MSI

MSI P1-109N-L70 Bedienungsanleitung

Dell

Dell PowerEdge XE9640 Handbuch

Dell

Dell PS4100 Montageanleitung

EtroVISION

EtroVISION EV3151 Bedienungsanleitung

NEC

NEC Express5800/T110j Bedienungsanleitung

HP ProLiant Gen9 Bedienungsanleitung

Compaq

Compaq ProLiant 3000 Handbuch

Dell

Dell PowerEdge 3YPMN Bedienungsanleitung

iRobo

iRobo IPC2U Bedienungsanleitung

Nortel

Nortel 1000 Con?guration guide Bedienungsanleitung

Asus

Asus AP7500 Bedienungs- und Wartungshandbuch

Avid Technology

Avid Technology AirSpeed 5000 Bedienungsanleitung

HP Integrity rx2600 Installationsanleitung

Milestone

Milestone Husky IVO 350T Bedienungsanleitung