Intellinet 521499 Bedienungsanleitung

User Manual

Version: 2.0

(August, 2004)

publication may be reproduced, transmitted, transcribed, stored in a retrieval

system, or translated into any language or computer language, in any form or

by any means, electronic, mechanical, magnetic, optical, chemical, manual or

otherwise, without the prior written permission of this company

This company makes no representations or warranties, either expressed or

implied, with respect to the contents hereof and specifically disclaims any

warranties, merchantability or fitness for any particular purpose. Any software

described in this manual is sold or licensed "as is". Should the programs

prove defective following their purchase, the buyer (and not this company, its

distributor, or its dealer) assumes the entire cost of all necessary servicing,

repair, and any incidental or consequential damages resulting from any defect

in the software. Further, this company reserves the right to revise this

publication and to make changes from time to time in the contents hereof

without obligation to notify any person of such revision or changes.

All brand and product names mentioned in this manual are trademarks and/or registered

trademarks of their respective holders.

Federal Communication Commission

Interference Statement

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

4. Consult the dealer or an experienced radio technician for help.

FCC Caution

This equipment must be installed and operated in accordance with provided

instructions and a minimum 5 cm spacing must be provided between

computer mounted antenna and person’s body (excluding extremities of

hands, wrist and feet) during wireless modes of operation.

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible

for compliance could void the authority to operate equipment.

Federal Communication Commission (FCC) Radiation Exposure Statement

This equipment complies with FCC radiation exposure set forth for an

uncontrolled environment. In order to avoid the possibility of exceeding the

FCC radio frequency exposure limits, human proximity to the antenna shall

not be less than 20cm (8 inches) during normal operation.

R&TTE Compliance Statement

This equipment complies with all the requirements of DIRECTIVE 1999/5/CE

OF THE EUROPEAN PARLIAMENT AND THE COUNCIL of March 9, 1999 on

radio equipment and telecommunication terminal Equipment and the mutual

recognition of their conformity (R&TTE)

The R&TTE Directive repeals and replaces in the directive 98/13/EEC

(Telecommunications Terminal Equipment and Satellite Earth Station

Equipment) As of April 8, 2000.

Safety

This equipment is designed with the utmost care for the safety of those who

install and use it. However, special attention must be paid to the dangers of

electric shock and static electricity when working with electrical equipment. All

guidelines of this and of the computer manufacture must therefore be allowed

at all times to ensure the safe use of the equipment.

EU Countries Intended for Use

The ETSI version of this device is intended for home and office use in Austria,

Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy,

Luxembourg, the Netherlands, Portugal, Spain, Sweden, and the United

Kingdom.

The ETSI version of this device is also authorized for use in EFTA member

states: Iceland, Liechtenstein, Norway, and Switzerland.

EU Countries Not intended for use

None.

CONTENTS

1INTRODUCTION.............................................................................1

1.1 FEATURES .................................................................................................... 1

1.2 SPECIFICATIONS............................................................................................ 1

1.3 PACKAGE CONTENTS..................................................................................... 2

2INSTALLATION PROCEDURE .....................................................3

3CONFIGURATION UTILITY .........................................................9

3.1 WIRELESS CONNECTION STATUS.................................................................... 9

3.2 GENERAL CONNECTION SETTING ................................................................. 11

3.3 WEP

AND WPA ENCRYPTION...................................................................... 14

3.3.1 WEP Setting........................................................................................................... 15

3.3.2 WPA Setting .......................................................................................................... 16

3.4 ADVANCED SETTING ................................................................................... 18

3.5 SOFTWARE AP MODE.................................................................................. 19

3.5.1 AP Connection Status ............................................................................................. 19

3.5.2 AP General Connection Setting............................................................................... 20

3.5.3 MAC Address Filter................................................................................................ 22

4TROUBLESHOOTING..................................................................24

1 Introduction

Thank you for purchasing the 802.11g Wireless LAN Mini USB Adapter. This USB Adapter is

designed to comply with IEEE 802.11g Wireless LAN standard and easy to carry with the

Mini size. It is suitable for any Laptop or Desktop computers.

This adapter supports 64/128/256-bit WEP data encryption that protects your wireless

network from eavesdropping. It also supports WPA (Wi-Fi Protected Access) feature that

combines IEEE 802.1x and TKIP (Temporal Key Integrity Protocol) technologies. Client

users are required to authorize before accessing to APs or AP Routers, and the data

transmitted in the network is encrypted/decrypted by a dynamically changed secret key.

This adapter has built-in AES engine which ensure the highest degree of security and

authenticity for digital information and it is the most advanced solution defined by IEEE

802.11i for the security in the wireless network.

This adapter is cost-effective, together with the versatile features; it is the best solution for

you to build your wireless network.

1.1 Features

• Complies with the IEEE 802.11b and IEEE 802.11g 2.4GHz standards.

• Up to 54Mbps high data transfer rate.

• Support 64/128/256-bit WEP, WPA (TKIP with IEEE 802.1x) and AES functions for high level

of security.

• Supports Software AP function, which turns the wireless station into a wireless AP.

• Complies with IEEE 802.11d country roaming standard.

• Support the most popular operating system: Windows 98SE/Me/2000/XP/Server 2003.

• Supports USB 2.0/1.1/1.0 interface.

• Portable and mini-size design.

• Suitable for Any Notebook or Desktop PC.

1.2 Specifications

• Standard: IEEE 802.11g/b

• Bus Type: USB 2.0 Type A

• Frequency Band: 2.4000~2.4835GHz (Industrial Scientific Medical Band)

• Modulation: OFDM with BPSK, QPSK, 16QAM, 64QAM (11g)

BPSK, QPSK, CCK (11b)

• Data Rate: 54/48/36/24/18/12/11/9/6/5.5/2/1Mbps auto fallback

• Security: 64/128/256-bit WEP Data Encryption, WPA (IEEE 802.1x with TKIP) and AES

• Antenna: Internal Antenna

• Drivers: Windows 98SE/Me/2000/XP/Server 2003

• LED: Link/Activity

• Transmit Power: 16dBm (Typical)

• Dimension: 9(H) x 27(W) x 87(D)

• Temperature: 32~131°F (0 ~55°C)

• Humidity: 0-95% (NonCondensing)

• Certification: FCC, CE

1.3 Package Contents

Before you begin the installation, please check the items of your package. The package

should include the following items:

• One USB Adapter

• One USB 2.0 Extension Cable (100 cm)

• One Quick Guide

• One CD (Driver/Utility/Manual)

If any of the above items is missing, contact your supplier as soon as possible.

2 Installation Procedure

Before you proceed with the installation, please notice following descriptions.

Note1: Please do not install the USB adapter into your computer before installing the software

program from the CD.

Note2: The following installation was operated in Windows XP. (Procedures are similar for

Windows 98SE/Me/2000/Server 2003.)

Note3: If you have installed the Wireless PC Card driver & utility before, please uninstall the

old version first.

Please follow below instructions to install the USB Adapter.

I. Install the Configuration Utility

A. Insert the Installation CD to your CD-ROM Drive. Execute the “setup” program.

B. If you want to install the software program in another location, click “Browser” and select

an alternative destination. Then, click “Next”.

C. Click “Continue Anyway” to finish the installation.

D. Click “Finish” to complete the installation.

II. Install the USB Adapter

A. Plug the USB Adapter into the USB port of your computer.

B. The “Found New Hardware Wizard” is displayed, select “Install the software automatically

(Recommended)” and click “Next”.

C. Click “Continue Anyway” and the system will start to install the USB adapter.

Inhaltsverzeichnis

Andere Intellinet Adapter Handbücher

Intellinet

Intellinet 522731 Bedienungsanleitung

Intellinet

Intellinet ISTREAM HD 525282 Bedienungsanleitung

Intellinet

Intellinet 525275 Bedienungsanleitung

Intellinet

Intellinet 524179 Bedienungsanleitung

Intellinet

Intellinet 503273 Bedienungsanleitung

Intellinet

Intellinet 503273 Bedienungsanleitung

Intellinet

Intellinet PowerLine HD Ethernet Adapter 503839 Bedienungsanleitung

Intellinet

Intellinet 525152 Bedienungsanleitung

Intellinet

Intellinet IPI-15 Bedienungsanleitung

Intellinet

Intellinet 501545 Bedienungsanleitung

Intellinet

Intellinet 530361 Bedienungsanleitung

Intellinet

Intellinet 791120 Bedienungsanleitung

Intellinet

Intellinet 505932 Bedienungsanleitung

Intellinet

Intellinet 524766 Bedienungsanleitung

Intellinet

Intellinet 525152 Bedienungsanleitung

Intellinet

Intellinet 525336 Bedienungsanleitung

Intellinet

Intellinet 501262 Bedienungsanleitung

Intellinet

Intellinet 505932 Bedienungsanleitung

Intellinet

Intellinet 524995 Bedienungsanleitung

Intellinet

Intellinet 503273 Bedienungsanleitung

Intellinet

Intellinet 503457 Bedienungsanleitung

Intellinet

Intellinet 524438 Installations- und Betriebshandbuch

Intellinet

Intellinet 522496 Bedienungsanleitung

Intellinet

Intellinet PowerLine Turbo Ethernet Adapter Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung