Intellinet 530361 Bedienungsanleitung

Wireless G

UsB AdApter

User mAnUAl

MODEL 530361

INT-530361-UM-0408-01

Thank you for purchasing the INTELLINET NETWORK SOLUTIONS

™

Wireless G USB Adapter, Model 530361.

Compatible with 802.11b and 802.11g wireless access points and routers,

this adapter lets you upgrade your wireless network without the need to

replace existing equipment. Transfer or receive digital images, videos

and MP3 les with link speeds of up to 54 Mbps using proven and reliable

Wireless G technology. With the easy-to-follow instructions in this manual,

you’ll soon be able to enjoy the benets of these additional features:

• Connects your notebook or PC to a wireless network

• Includes USB stand and extension cable

• Turbo Mode technology for enhanced wireless throughput

• Supports WEP (64/128 bit), WPA and WPA2 data encryption

• Supports Software AP function (turns your wireless client into a

wireless access point)

• Supports WMM (Wi-Fi Multimedia) for increased multimedia data

throughput

• Windows 98SE/2000/Me/XP/Vista compatible

• Lifetime Warranty

FCC CertiFiCations

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Any changes or modications not expressly approved by the

party responsible for compliance could void the user’s authority to operate

the equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference; and (2) this device must accept any interference received,

including interference that may cause undesired operation.

FCC rF radiation exposure statement

This equipment complies with FCC RF radiation exposure limits set forth

for an uncontrolled environment, and should be installed and operated with

a minimum distance of 2.5 cm (1 in.) between the radiator and your body.

SAR (specic absorption rate) compliance has been established in laptop

computer congurations with a USB port on the side near the center, as

tested in the application for certication, and can be used in laptops with

substantially similar physical dimensions, construction and electrical and

RF characteristics. Use in other devices, such as PDAs or lap pads, is

not authorized. This transmitter is restricted for use with the specic

antenna(s) tested in the application for certication. The antenna(s) used

for this transmitter must not be co-located or operated in conjunction with

any other antenna or transmitter.

r&tte ComplianCe statement

This equipment complies with all the requirements of Directive 1999/5/EC

of the European Parliament and the Council of March 9, 1999, on radio

equipment and telecommunication terminal equipment (R&TTE) and the

mutual recognition of their conformity. The R&TTE directive repeals and

replaces Directive 98/13/EEC (Telecommunications Terminal Equipment

and Satellite Earth Station Equipment) as of April 8, 2000.

eu Countries intended For use

The ETSI version of this device is intended for home/ofce use in Austria,

Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy,

Luxembourg, the Netherlands, Portugal, Spain, Sweden and the U.K., and

is also authorized for use in EFTA member states Iceland, Liechtenstein,

Norway and Switzerland. (EU countries not intended for use: none.)

tABle of contents

Installation ..........................................................................................6

 ....................................................................................7

Network........................................................................................ 9

Prole ................................................................................................10

Prole Conguration ............................................................. 12

Prole Authentication & Encryption (Security)...................... 13

802.1x Setting/Certication................................................... 16

802.1x Setting/CA Server...................................................... 17

Statistics .................................................................................... 18

Advanced................................................................................... 18

WMM.......................................................................................... 21

About..........................................................................................22

WPS Conguration ....................................................................22

SoftAP ......................................................................................................24

Conguration ............................................................................. 24

Security Setting ......................................................................... 26

Access Control .......................................................................... 28

MAC Table ................................................................................. 29

Event Log...................................................................................29

Statistics ....................................................................................30

About..........................................................................................30

................................................................................... 31

NOTE: Some screen-shot images have been modied to t the format

of this user manual.

CONTENTS

section page

instAllAtion

Prior to connecting the Wireless G USB Adapter:

• Uninstall any previously loaded versions of the driver and utility.

• Install the software program from the CD. NOTE: The following Windows

XP procedure is similar for Windows 98SE/Me/2000/2003/Vista.

1. Insert the setup CD in the CD-ROM drive and run the setup program.

2. Read the license agreement that displays; click “Yes” to proceed.

3. In Windows XP, a “Microsoft (Windows) Zero Conguration Tool” option

displays. It’s recommended that the alternative “Ralink Conguration

Tool” option be selected, as it features more functions. Click “Next.”

4. To run the adapter at a higher speed, select “Optimize for performance”

to enable the Tx Burst mode. Otherwise, “Optimize for WiFi” sets the

adapter to run with a standard wireless network. Click “Next.”

INSTALLATION

5. Once the software

installation begins,

a Setup Status

screen is followed

by a prompt to

connect the Wireless

G USB Adapter to

your computer. The

system automatically

detects the adapter.

NOTE: In Windows

Vista, a Found New

Hardware screen appears (above) when the adapter is connected. You

can ignore the message, as it disappears once installation is complete.

6. When the Finish screen appears, click “Finish.”

confiGUrAtion

The conguration utility — which displays automatically once the adapter

is connected — is a powerful application that helps you congure the

adapter and monitor link status and statistics during the communication

process. This adapter will auto-connect to the wireless device that has

the better signal strength and no wireless security setting.

CONFIGURATION

The conguration utility appears as an icon in the Windows system tray

while the adapter is running. You can

open it by double-clicking on the icon.

In Windows XP, there is a “Windows Zero Conguration Tool” option for

setting up wireless clients. If you prefer to use the conguration utility,

there are two ways to switch to it instead of using the Windows tool.

option 1

1. Right-click the utility icon in the

system tray and select “Use

RaCong as Conguration

utility.”

option 2

1. Right-click the icon on the left side

of the system tray and select “View Available Wireless Networks.”

2. Click “Change advanced settings.”

CONFIGURATION

3. Uncheck “Use Windows

to congure my wireless

network settings” to

enable the utility for the

adapter. NOTE: If

“Wireless Zero

Conguration Tool” is

enabled, you can only

congure the advanced

settings or check the

link status and statistics

from the conguration

utility of the adapter.

NETWORK

When you open the conguration utility, the system scans all the channels

to nd access points/stations within the accessible range of the adapter

and automatically connect to the wireless device with the highest signal

strength. On the Network screen, all the networks nearby are listed.

You can change the connection to another network or add one of the

networks to your own prole list.

CONFIGURATION

 This list shows all available wireless networks within

the range of the adapter. It also displays network information: SSID,

BSSID, Signal Strength, Channel, Encryption, Authentication and

Network Type. To connect to a network on the list, double-click the

item and the adapter will connect automatically to it.

 Click “Rescan” to collect the new information of all the wireless

networks nearby.

 Click “Connect” to connect to the selected network.

 Click to add the selected network to the Prole list.

PROFILE

The Prole screen is for managing networks you connect to frequently.

You can add, delete, edit and activate a prole on this screen.

 The Prole List displays all the proles and their related

settings, including Prole Name, SSID, Channel, Authentication,

Encryption and Network Type.

 Click the corresponding button to add, edit or delete

the selected prole(s). Clicking “Add” displays the Add Prole screen,

which presents 1) Conguration and 2) Authentication and Encryption

(Security).

 To display status information about your current wireless

connection, select the prole and click “Activate.” When a prole is

activated, the adapter will be initially connected to it.

CONFIGURATION

Inhaltsverzeichnis

Andere Intellinet Adapter Handbücher

Intellinet

Intellinet 561495 Bedienungsanleitung

Intellinet

Intellinet 503273 Bedienungsanleitung

Intellinet

Intellinet 524773 Bedienungsanleitung

Intellinet

Intellinet 524698 Bedienungsanleitung

Intellinet

Intellinet 502641 Bedienungsanleitung

Intellinet

Intellinet 525275 Bedienungsanleitung

Intellinet

Intellinet 525336 Bedienungsanleitung

Intellinet

Intellinet 505932 Bedienungsanleitung

Intellinet

Intellinet 524766 Bedienungsanleitung

Intellinet

Intellinet 525206 Bedienungsanleitung

Intellinet

Intellinet 500913 Bedienungsanleitung

Intellinet

Intellinet 524698 Bedienungsanleitung

Intellinet

Intellinet 524179 Bedienungsanleitung

Intellinet

Intellinet 525152 Bedienungsanleitung

Intellinet

Intellinet 522496 Bedienungsanleitung

Intellinet

Intellinet 501262 Bedienungsanleitung

Intellinet

Intellinet 503273 Bedienungsanleitung

Intellinet

Intellinet IPI-15 Bedienungsanleitung

Intellinet

Intellinet PowerLine Turbo Ethernet Adapter Bedienungsanleitung

Intellinet

Intellinet 791120 Bedienungsanleitung

Intellinet

Intellinet 503457 Bedienungsanleitung

Intellinet

Intellinet 524438 Bedienungsanleitung

Intellinet

Intellinet 505932 Bedienungsanleitung

Intellinet

Intellinet 503457 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Bedienungsanleitung