Interlogix NS3552-16P-2T-2S Bedienungsanleitung

NS3552-16P-2T-2S Quick Installation Guide

Figure 1: NS3552-16P-2T-2S Industrial L2+ Multi-port Full Gigabit

Managed Ethernet Switch

1. Package Contents

Thank you for purchasing IFS L2+ Industrial Managed Switch,

NS3552-16P. The descriptions of this model are as follows:



Industrial 16-Port 10/100/1000T 802.3at PoE +



2-Port 10/100/100T



+ 2-Port 100/1000X SFP Managed Switch

“Industrial Managed Switch” mentioned in this Quick

Installation Guide refers to the above seven models.

Open the box of the Industrial Managed Switch and carefully

unpack it. The box should contain the following items:

The Industrial Managed Switch x 1

Quick Installation Guide x 1

DIN Rail Kit x 1

Wall Mounting Kit x 1

DB9 to RJ45 Interface RS232 Console Cable x 1

Dust Cap (Please refer to the table below)

RJ45 Dust Cap SFP Dust Cap

NS3552-16P-2T-2S 19 2

If any of these are missing or damaged, please contact your

dealer immediately. If possible, retain the carton including the

original packing materials to enable you to repack the product

in case there is a need to return it to us for repair.

2. Requirements

The Industrial Managed Switch providesremote login interface

for management purposes. The following equipment is

necessary for further management:



Workstation is installed with Ethernet NIC (Network

Interface Card)



Choice of Internet browsers includes Windows XP/2003,

Vista, Windows 7, Windows 8, Windows 10, MAC OS X,

Linux, Fedora, Ubuntu or other platforms compatible with

TCP/IP protocols.



The above workstation is installed with Web browser

and JAVA runtime environment plug-in.



Ethernet Port connection



Use standard network (UTP) cables with RJ45

connectors.

Note: It is recommended to use Internet Explorer 8.0 or above

to access the Industrial Managed Switch.

3. Wiring the Power Inputs

The Upper Panel of the Industrial Managed Switch indicates

a DC inlet power socket and consists of one terminal block

connector within 6 contacts. Please follow the steps below to

insert the power wire.

1. Insert positive/negative DC power wires into contacts 1

and 2 for Power 1, or 5, and 6 for Power 2.

NS3552-16P-2T-2S : DC 48~56V

Figure 2: NS3552-16P Upper Panel

2. Tighten the wire-clamp screws to prevent the wires from

loosening.

2 / 4P/N 1073222-EN • REV A • ISS 21SEP16

Power 1

Power 2

Positive (+) Pin Negative (-) Pin

NS3552-16P Pin 1/5 Pin 2/6

Note: The wire gauge for the terminal block should be in the

range from 12 to 24 AWG.

4. Terminal Setup

To configure the system, connect a serial cable to a COM port

on a PC or notebook computer and to RJ45 type serial

(console) port of the Managed Industrial Switch. The console

port of the Industrial Managed Switch is DCE already so that

you can connect the console port directly through PC without

the need of null modem.

A terminal program is required to make the software connected

to the NS3552-16P-2T-2S Switch. Windows' Hyper Terminal

program may be a good choice. The Hyper Terminal can be

accessed from the Start menu.

1. Click START, then Programs, Accessories and then

Hyper Terminal.

2. When the following screen appears, make sure that the

COM port should be configured as:

♦Baud: 115200

♦Parity: None

♦Data bits: 8

♦Stop bits: 1

♦Flow control: None

3. Log on to the Console

Once the terminal has been connected to the device, power on

the NS3552-16P-2T-2S Switch and the terminal will display

“running testing procedures”.

When the following dialog box shown in Figure 3 appears,

please enter the factory default user name "admin" and

password “admin”.

User name: admin

Password: admin

Figure 3: Console Login screen

Note:

1. For security reason, please change and memorize the

new password after this first setup.

2. Only commands in lowercase letters are accepted in

the console interface.

6. Configuring IP address

The Industrial Managed Switch is shipped with default IP

address shown below:

IP Address: 192.168.0.100

Subnet Mask: 255.255.255.0

To check the current IP address or modify a new IP address

for the Switch, please use the procedure as follows:

P/N 1073222-EN • REV A • ISS 21SEP16 3 / 4

Display of the current IP Address

1. At the “#” prompt, enter “show ip interface brief”.

2. The screen displays the current IP address shown in

Figure 4.

Figure 4: IP Information Screen

Configuration of the IP Address

3. At the “#” prompt, enter the following command and press

<Enter> as shown in Figure 5.

NS3552-16P-2T-2S# configure terminal

NS3552-16P-2T-2S (config)# interface vlan 1

NS3552-16P-2T-2S (config-if-vlan)# ip address 192.168.1.100

255.255.255.0

The previous command would apply the following settings

for the Industrial Managed Switch.

IP Address: 192.168.1.100

Subnet Mask: 255.255.255.0

Figure 5: Configuring IP Address Screen

4. Repeat step 1 to check if the IP address has changed.

Store the current switch configuration

5. At the “#” prompt, enter the following command and press

<Enter>.

# copy running-config startup-config

Figure 6: Saving Current Configuration Command Screen

If the IP is successfully configured, the Industrial Managed

Switch will apply the new IP address setting immediately. You

can access the Web interface of the Industrial Managed Switch

through the new IP address.

Note: If you are not familiar with the console command or the

related parameter, enter “help” anytime in console to get the

help description.

7. Starting Web Management

The following shows how to start up the Web Management of

the Industrial Managed Switch. Note the Industrial Managed

Switch is configured through an Ethernet connection. Please

make sure the manager PC must be set to the same IP subnet

address.

For example, the default IP address of the Industrial Managed

Switch is 192.168.0.100, then the manager PC should be set

to 192.168.0.x (where x is a number between 1 and 254,

except 100), and the default subnet mask is 255.255.255.0.

Figure 7: IP Management Diagram

Logging in to the NS3552-16P Switch

1. Use Internet Explorer 8.0 or above for Web browser and

enter IP address http://192.168.0.100 (the factory-default

IP address) to access the Web interface.

2. When the following dialog box appears, please enter the

default user name “admin” and password “admin” (or the

password you have changed before)as shown in Figure 8.

Default IP Address: 192.168.0.100

Default User Name: admin

Default Password: admin

4/ 4P/N 1073222-EN • REV A • ISS 21SEP16

Figure 8: Login Screen

3. After entering the password, the main screen appears as

shown in Figure 9.

Figure 9: Web Main Scree of Industrial Managed Switch

4. The Switch Menu on the left of the Web page lets you

access all the functions and status the Industrial Managed

Switch provides.

Now you can use the Web management interface to continue

the Switch management. Please refer to the user manual for

more.

Note: For security reason, please change and memorize the

new password after this first setup.

8. Resetting the Switch to

Default

To reset the IP address to the default IP Address

“192.168.0.100” and the user password to factory default

mode (default password is admin), press the hardware reset

button on the front panel for about 10 seconds. After the device

is rebooted, you can login the management Web interface

within the same subnet of 192.168.0.xx and default password.

Be noted that all the previous setups will be disappeared after

the factory default reset is made.

Figure 10: NS3552-16P Reset Button.

9. Customer Support

Thank you for purchasing IFS products. You can browse our

online FAQ resource on IFS web site first to check if it could

solve your issue. If you need more support information, please

contact IFS switch support team.

Look under transmission.

IFS online FAQ:

http://www.Interlogix.com/support

Switch support team mail address:

http://www.Interlogix.com/support

Andere Interlogix Schalten Handbücher

Interlogix

Interlogix NS4702-24P-4S-4X Bedienungsanleitung

Interlogix

Interlogix NS3702-24P-4S Bedienungsanleitung

Interlogix

Interlogix IFS ANT-UNI-21DB-2G Bedienungsanleitung

Interlogix

Interlogix IFS MC350-4T-2S Bedienungsanleitung

Interlogix

Interlogix NS4702-24P-4X Bedienungsanleitung

Interlogix

Interlogix NS4702-24P-4S-4X Bedienungsanleitung

Interlogix

Interlogix NS4750-24S-4T-4X Bedienungsanleitung

Interlogix

Interlogix ES2402 Series Bedienungsanleitung

Interlogix

Interlogix NS4750-24S-4T-4X-V2 Montageanleitung

Interlogix

Interlogix NS3562-8P-2S Bedienungsanleitung

Interlogix

Interlogix NS3562-8P-2S Bedienungsanleitung

Interlogix

Interlogix NS4750-24S-4T-4X Bedienungsanleitung

Interlogix

Interlogix NS3552-8P-2S-V2 Bedienungsanleitung

Interlogix

Interlogix NS3562-8P-2S Bedienungsanleitung

Interlogix

Interlogix ES3002-4P-4T Bedienungsanleitung

Interlogix

Interlogix NS3552-16P-2T-2S Bedienungsanleitung

Interlogix

Interlogix NS3552-8P-2S-V2 Bedienungsanleitung

Interlogix

Interlogix NS3503-16P-4C Bedienungsanleitung

Interlogix

Interlogix IFS NS3550-24T/4S Bedienungsanleitung

Interlogix

Interlogix IFS GE-DSH-73 Montageanleitung

Interlogix

Interlogix POC2502 Series Bedienungsanleitung

Interlogix

Interlogix IFS ANT-OMN-15DB-2G Bedienungsanleitung

Interlogix

Interlogix NS3550-8T-2S Bedienungsanleitung

Interlogix

Interlogix NS3500-28T-4S Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung