Intex Krytstal Clear 634T Bedienungsanleitung

110A

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/06/2016

English 110A

English

OWNER’S MANUAL

IMPORTANT

SAFETY RULES

Please read, understand, and follow all

instructions carefully before installing

and using this product. Keep for future

reference.

Don’t forget to try these other fine Intex products: pools, pool

accessories, inflatable pools and in-home toys, airbeds and boats

available at fine retailers or visit our website.

Due to a policy of continuous product improvement, Intex reserves

the right to change specifications and appearance, which may result

in updates to the instruction manual without notice

For illustrative purposes only.

- Intex Recreation Corp.

vorbehalten. Printed in China/Imprimé en Chine/Impreso en China/Gedruckt in China.

®™ Trademarks used in some countries of the world under license from/®™ Marques utilisées dans certains pays sous licence de/

Marcas registradas utilizadas en algunos países del mundo bajo licencia de/Warenzeichen verwendet in einigen Ländern der Welt in

Lizenz von/Intex Marketing Ltd. to/à/a/an Intex Trading Ltd., Intex Development Co. Ltd., G.P.O Box 28829, Hong Kong & Intex

Recreation Corp., P.O. Box 1440, Long Beach, CA 90801 • Distributed in the European Union by/Distribué dans l’Union Européenne

par/Distribuido en la unión Europea por/Vertrieb in der Europäischen Union durch/Intex Trading B.V., Venneveld 9, 4705 RR

Roosendaal – The Netherlands

www.intexcorp.com

Krystal Clear™

Model 634T Filter Pump

220 - 240 V~, 50 Hz, 360 W

Hmax 5.0 m, Hmin 0.19 m, IPX4

Max. Water Temperature 35 °C

110-*A*-R0-1706

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/06/2016

110A

SAVE THESE INSTRUCTIONS

English

Page 2

Warnings.......................................................................... 3

Parts List & Reference.................................................... 4-5

Setup Instructions........................................................... 6-9

Operating Instructions.................................................... 10

Operating Time Table...................................................... 11

Maintenance..................................................................... 12-13

Pool Care and Chemicals............................................... 13

Long Term Storage.......................................................... 13

Troubleshooting Guide................................................... 14

Common Pool Problems................................................. 15

General Aquatic Safety................................................... 15

Limited Warranty..............................................................

TABLE OF CONTENTS

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/06/2016

110A

SAVE THESE INSTRUCTIONS

English

Page 3

IMPORTANT SAFETY RULES

Read, Understand and Follow All Instructions Carefully Before Installing and Using this Product.

READ AND FOLLOW ALL INSTRUCTIONS

WARNING

These product warnings, instructions and safety rules provided with the product represent some

common risks of water recreation devices and do not cover all instances of risk and danger.

Please use common sense and good judgement when enjoying any water activity.

• Always supervise children and those with disabilities.

• Children must stay away from this product and electrical cord(s).

• Children shall not play with the appliance. Cleaning and user maintenance shall not be made

by children without supervision.

• This appliance can be used by children aged from 8 years and above and persons with

reduced physical, sensory or mental capabilities or lack of experience and knowledge if they

have been given supervision or instruction concerning use of the appliance in a safe way and

understand the hazards involved.

• Assembly and disassembly by adults only.

• Risk of electric shock. Connect this product only to a grounding type receptacle protected by

a ground-fault circuit interrupter (GFCI) or residual current device (RCD). Contact a qualified

electrician if you cannot verify that the receptacle is protected by a GFCI/RCD. Use a qualified

electrician to install the GFCI/RCD, which has a maximum rate of 30mA. Do not use a portable

residual current device (PRCD).

• Always unplug this product from the electrical outlet before removing, cleaning, servicing or

making any adjustment to the product.

• The plug must be accessible after produc t is installed.

• Do not bury the electrical cord. Locate the cord where it will not be damaged by lawn mowers,

hedge trimmers and other equipment.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or

similarly qualified persons in order to avoid a hazard.

• To reduce the risk of electric shock, do not use extension cords, timers, plug adaptors or

converter plugs to connect unit to electric supply; provide a properly located outlet.

• Do not attempt to plug in or unplug this product while standing in water or when your hands

are wet.

• Keep this product more than 2m away from the pool.

• Keep this product more than 3.5m away from the pool (for France only).

• Keep the plug of this product more than 3.5m away from the pool.

• Position this product away from the pool, so as to prevent children from climbing on it and

accessing the pool.

• Do not operate this product when pool is occupied.

• This product is for use with storable pools only. Do not use with permanently installed pools.

A storable pool is constructed so that it may be readily disassembled for storage and

reassembled to its original configuration.

• The appliance is intended only for household use.

• This product is intended to be used only for the purposes described in the manual!

FAILURE TO FOLLOW THESE WARNINGS MAY RESULT IN PROPERTY DAMAGE,

ELECTRIC SHOCK, ENTANGLEMENT OR OTHER SERIOUS INJURY OR DEATH.

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/06/2016

110A

SAVE THESE INSTRUCTIONS

English

Page 4

PARTS REFERENCE

Before assembling your product, please take a few minutes to check the contents

and become familiar with all the parts.

When ordering parts, be sure to quote the model number and part numbers.

NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale.

REF. NO.

DESCRIPTION QTY. SPARE PART NO.

1 THREADED FILTER HOUSING COLLAR 1 10491

AIR RELEASE VALVE/SEDIMENT RELEASE VALVE

210460

3 VALVE O-RING 2 10264

4 FILTER HOUSING COVER 1 10490

5 FILTER HOUSING O-RING 110492

6 FILTER CARTRIDGE (29005) 1

7 AIR RELEASE VALVE B (WITH O-RING) 110725

8 PUMP HOSE WITH NUTS 2 11010

Type of lter medium Synthetic cartridge #29005

No tools are required for the assembly.

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/06/2016

110A

SAVE THESE INSTRUCTIONS

English

Page 5

PARTS REFERENCE (continued)

Before assembling your product, please take a few minutes to check the contents

and become familiar with all the parts.

NOTE: Drawings for illustration purpose only. Actual product may vary. Not to scale.

10*

11*

12*

13*

14*

15*

17*

18*

19*

20*

REF. NO. DESCRIPTION QTY. SPARE PART NO.

10747

10262

10745

10256

10255

11235

12369

10712

12198

12363

12371

12373

PLUNGER VALVE (HOSE O-RING & STEP WASHER INCLUDED)

HOSE O-RING

STEP WASHER

STRAINER NUT

FLAT STRAINER RUBBER WASHER

THREADED STRAINER CONNECTOR

ADJUSTABLE POOL INLET JET NOZZLE

HOSE O-RING

STRAINER GRID

AIR JET VALVE

INLET THREADED AIR CONNECTOR

AIR JET VALVE CAP (NOT SHOWN)

11 12 13 14

" * ": Optional.

When ordering parts, be sure to quote the model number and part numbers.

13 15

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/06/2016

110A

SAVE THESE INSTRUCTIONS

English

Page 6

1. In a counter-clockwise motion unscrew

plunger valve union from the threaded

strainer connector (14) (see drawing 1). Be

careful not to lose the step rubber

washer

(11). Place the plunger valve on the

ground in a safe place.

2. In a counter-clockwise motion unscrew

the strainer nut (12) from the threaded

connector

(14). Leave the flat washer (13)

on the connector (14).

3. Install the strainer and plunger valve at the

lower position of pool outlet (marked"+").

From the inside of the pool liner insert

the connector (14) into one of the pre-cut

holes with the washer remaining on the

connector to be placed against the inside

of the liner wall.

4. Before assembly, lubricate the threads with

a petroleum jelly. Then, with the flat side of

the strainer nut (12) facing the outside wall

of the liner in a clockwise motion screw the

strainer nut (12) back onto the threaded

connector

(14) (see drawing 2).

5. Finger tighten the strainer nut (12) onto the

threaded connector (14).

6. Grasp the plunger valve assembly. Make

sure the step washer (11) is in place.

7. In a clockwise motion screw the plunger

valve union back onto the threaded

connector

(14) (see drawing 3).

8. In a clockwise motion turn the plunger

valve handle to close position. Ensure the

plunger valve is securely closed. This will

prevent water from flowing out during

filling of the pool (see drawing 4).

The strainer grid prevents large objects from jamming and/or damaging the filter pump.

The plunger valve assembly prevents water from flowing into the filter pump while the

filter cartridge is being placed or cleaned. If your pool has inflatable top ring, install the

strainer, nozzle and plunger valve before inflating the pool liner top ring. The parts

numbers here onward, refer to the parts depicted in the Parts List section of this manual.

To install, do the following:

POOL OUTLET - STRAINER & PLUNGER VALVE SETUP (optional)

INSIDE

LINER WALL

INSIDE

LINER WALL

13 1412 17

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/06/2016

110A

SAVE THESE INSTRUCTIONS

English

Page 7

POOL INLET - NOZZLE & PLUNGER VALVE SETUP (optional)

1. In a counter-clockwise motion unscrew plunger valve

union from the inlet threaded air connector (19) (see

drawing 5). Be careful not to lose the step rubber

washer

(11). Place the plunger valve on the ground

in a safe place.

2. In a counter-clockwise motion unscrew the strainer

nut

(12) from the inlet threaded air connector (19).

Leave the flat washer (13) on the connector (19).

3. Install the nozzle and plunger valve at the upper

position of the pool inlet. From the inside of the pool

liner insert the nozzle union (15 & 19) into one of the

pre-cut holes with the washer remaining on the

connector to be placed against the inside of the liner

wall.

4. Before assembly, lubricate the threads with a

petroleum jelly. Then, with the flat side of the strainer

nut

(12) facing the outside wall of the liner in a

clockwise motion screw the strainer nut (12) back

onto the inlet threaded air connector (19) (see

drawing 6).

5. Finger tighten the adjustable pool inlet jet nozzle (15)

and the strainer nut (12) onto the inlet threaded air

connector

(19).

6. Grasp the plunger valve assembly. Make sure the

step washer (11) is in place.

7. Screw the air jet valve (18) over the inlet threaded air

connector

(19). NOTE: Make sure the air jet valve is

securely tighten and facing up. In a clockwise motion

screw the plunger valve union back onto the inlet

threaded air connector (19) (see drawing 7).

8. In a clockwise motion turn the plunger valve handle

to close position. Ensure the plunger valve is

securely closed. This will prevent water from flowing

out during filling of the pool (see drawing 8).

9. Adjust the direction of the nozzle head pointing away

from the pool outlet for a better circulation result (see

drawing 9).

10. The pool liner is now ready to be filled with water.

Consult the above-ground-pool owner’s manual for

the filling instructions.

INSIDE

LINER WALL

WATER

FLOW

POOL

13 19 15

INSIDE LINER

WALL

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/06/2016

110A

SAVE THESE INSTRUCTIONS

English

Page 8

FILTER PUMP HOSE CONNECTION SETUP

1. Remove the Krystal Clear™ filter pump and hoses from the packaging.

2. Place the filter pump in such a manner, that you can easily assemble the hose (8)

connections to the plunger valve. Ensure the filter pump is accessible at all time for service

and maintenance.

Note: Some regional regulations may require the filter pump to be mounted on a

stationary platform. There are two mounting holes located in the pump base for this

reason. Consult your local authorities for filter-pump mounting requirements.

3. Grasp the two pump hoses (8) and connect the hose nuts to the filter pump.

4. In a counter-clockwise motion unscrew the threaded filter housing collar (1) from the filter

housing. Place it in a safe place.

5. The Filter Pump is an airtight system. In a counter-clockwise motion turn both air release

valves

(2 & 7) 1 - 2 turns to open. DO NOT remove air release valves as water will expel

with force if the motor is turned on and injury may occur.

6. Grasp and remove the filter housing cover (4). Check to see if a cartridge is i

nside the

housing. If yes, replace the cover, finger tighten the housing collar (1)

back onto the filter

housing.

7. Gently finger tighten the sediment release valve located at the bottom of the

housing to be

sure that water does not leak out.

8. When the pool is filled connect the hose from the bottom of the filter housing to the highest

strainer assembly. You will find the hose connection at the bottom of the plunger valve

assembly. Use the hose nut to attach the hose.

9. Connect the second hose which is fixed to the middle of the motor housing to the remaining

liner connection.

It is essential to change any damaged element or set of elements as soon as possible.

Use only parts approved by the manufacturer.

WARNING

Position this product away from the pool, so as to prevent children from

climbing on it and accessing the pool.

The installation instruction shall provide information on requirements specified for the electrical

installation and shall include reference to national wiring rules.

WATER LEVEL

ADJUSTABLE POOL

INLET JET NOZZLE

PLUNGER VALVE

ASSEMBLY

HOSE NUT

OUTLET HOSE

INSIDE LINER

WALL

THREADED

STRAINER

CONNECTOR

FILTER HOUSING

COLLAR

FILTER CARTRIDGE

INSIDE

FILTER HOUSING

COVER

AIR RELEASE

VALVE

MOTOR

HOUSING

HOSE O-RING

POWER CORD

INLET HOSE OUTSIDE

LINER WALL

(ILLUSTRATION NOT TO SCALE)

HOSE O-RING

AIR JET VALVE

INLET THREADED AIR

CONNECTOR

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/06/2016

110A

SAVE THESE INSTRUCTIONS

English

Page 9

FILTER PUMP STATIONARY MOUNTING

165 mm

1. The mounting holes are 6.4 mm in diameter and spaced 165 mm apart.

2. Use two bolts and lock nuts with a maximum of 6.4 mm in diameter.

FILTER PUMP INSTALLATION DISTANCE

(Generic layout of an electrical device relative to a swimming pool. Illustration not to scale)

According to the International Standard, IEC 60364-7-702, on electrical installation of swimming

pools and other basins equipment, the following installation distances must be respected:

• The filter pump must be positioned more than 2m away from the pool walls.

• The power cord plug to the 220-240 volt electrical power source of the filter pump must be

positioned more than 3.5 m away from the pool walls.

Check your local authorities to determine the appropriate standard and requirements for “electrical

installation of swimming pools and basins equipment”. The following table is for reference only:

International

France

Germany

The Netherlands

Country/Region Standard Number

IEC 60364-7-702

NF C 15-100-7-702

DIN VDE 0100-702

NEN 1010-702

>2m

>3.5m

POOL

hoses Electrical

device

Some countries, especially in the European community, require the filter-pump to be secured to

the ground or to a base in a permanent upright position. Check your local authorities to determine

if there is a regulation in your area regarding above-the-ground swimming pool filter-pumps. If yes,

then the filter-pump can be mounted to a platform using the two holes located in the base. See

drawing below.

The filter-pump can be mounted on a cement base or onto a wooden platform to prevent accidental

falling over. Total assembly must exceed 18kg.

(110) MODEL 634 FILTER PUMP ENGLISH 7.5” X 10.3” PANTONE 295U 06/06/2016

110A

SAVE THESE INSTRUCTIONS

English

Page 10

1. Make sure the filter pump is switched off. The switch is located on the motor housing.

2. Connect the power cord to a GFCI protected electrical outlet.

3.Turn both plunger valve handles fully counter-clockwise until they stop. This opens the

valve, allowing water to flow into the filter pump.

4. With water flowing into filter pump, the water pressure will allow the air trapped inside to

escape from the air release valves (2 & 7). When all the air has escaped water will flow

out of the valves (2 & 7). When this occurs gently finger tighten the valves (2 & 7) in a

clockwise direction.

5. To operate the filter pump on “TIMER” mode:

A. Set the timer dial to the desired operating hours. See operation time table.

See Fig. 10

B. Turn on the pump by pressing the switch to “ ” position, the filter pump is now

filtering the water and will stop after the operating hours are completed. The built-in

timer will now operate for the number of hours selected at the same time each day.

C. Operating hours can be re-adjusted if necessary. Follow step A – B.

To operate the filter pump manually (without the “TIMER” mode):

A. Turn on the pump by pressing the switch to “I” position, the filter pump is now filtering

the water.

B. To turn off the pump, press the switch to “O” position.

To prevent air lock, open the lower plunger valve (connected inlet hose) first and

then the upper plunger valve (connected outlet hose). Open the air release valves,

wait until water starts to flow out of the air release valves, close air release valves.

IMPORTANT

OPERATING INSTRUCTIONS

Risk of electric shock. Connect this product only to a grounding type

receptacle protected by a ground-fault circuit interrupter (GFCI) or residual

current device (RCD). Contact a qualified electrician if you cannot verify

that the receptacle is protected by a GFCI/RCD. Use a qualified electrician

to install the GFCI/RCD, which has a maximum rate of 30mA. Do not use a

portable residual current device (PRCD).

WARNING

FIG 10

OFF

TIMER

TIMER DIAL (HOURS)

6.Never put pool chemicals directly into the filter pump. This may damage the pump and void

the warranty.

Andere Handbücher für Krytstal Clear 634T

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Intex Wasserpumpe Handbücher

Intex

Intex Krystal Clear CS15110 Bedienungsanleitung

Intex

Intex Quick-Fill AP643 Bedienungsanleitung

Intex

Intex PureSpa SSP-H-10-2 Bedienungsanleitung

Intex

Intex Krystal Clear C2500 Bedienungsanleitung

Intex

Intex Krystal Clear SX925 Bedienungsanleitung

Intex

Intex 602 Bedienungsanleitung

Intex

Intex SF80220RC-1 Bedienungsanleitung

Intex

Intex QUICK FILL PLUS Bedienungsanleitung

Intex

Intex Quick-Fill AP622 Bedienungsanleitung

Intex

Intex Krystal Clear 604 Bedienungsanleitung

Intex

Intex AP638 Bedienungsanleitung

Intex

Intex FastFill I637USB Bedienungsanleitung

Intex

Intex Krystal Clear 603 Bedienungsanleitung

Intex

Intex ECO 20110 Bedienungsanleitung

Intex

Intex 620R Bedienungsanleitung

Intex

Intex SF15220 Bedienungsanleitung

Intex

Intex Krystal Clear SF90220T Bedienungsanleitung

Intex

Intex Krystal Clear 601 Bedienungsanleitung

Intex

Intex PureSpa PS-BH-10 Bedienungsanleitung

Intex

Intex Krystal Clear 604 Bedienungsanleitung

Intex

Intex 164124NP Bedienungsanleitung

Intex

Intex Quick-Fill AP632 Bedienungsanleitung

Intex

Intex Fast-Fill AP619C Bedienungsanleitung

Intex

Intex AP619A Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung

STA-RITE

STA-RITE ST33APP Bedienungsanleitung