InWin IW-RS104-02M Bedienungsanleitung

IN WIN DEVELOPMENT

Passive SAS/SATA Backplane User Manual

Supported Devices

Part Number

Description

3RAMVI005500

3RAMVI005600

IW-RS104-02M / IW-RS104-02SN PASSIVE BACKPLANE MODULE

3RAMVI006000

2RAKVI001000

IW-RS110-02M PASSIVE BACKPLANE MODULE

3RAMVI006200

2RAKVI001200

IW-RS208-02M PASSIVE BACKPLANE MODULE

3RAMVI006300

2RAKVI001300

IW-RS212-02M PASSIVE BACKPLANE MODULE

3RAMVI006100

2RAKVI001100

IW-SK34 PASSIVE BACKPLANE MODULE

(IW-MS04/IW-MS08/IW-MS08-A/IW-PLV Tower/IW-PLG Tower)

3RAMVI005900

IW-SK35 PASSIVE BACKPLANE MODULE

(IW-R400-03N)

Draft Version: 0.2

History

Version

Changes

Date

0.1

First draft

2017/4/17

0.2

SGPIO setting behavior change

2017/5/9

 
Table Of Contents 
1Overview............................................................................................................................ 4 
2Jumper Settings................................................................................................................. 5 
3Connectors ........................................................................................................................ 8 
3.1 29-pin SAS HDD connector........................................................................................... 8 
3.2 SFF-8643 Mini-SAS connector: ..................................................................................... 9 
3.3 4-Pin power receptacle .............................................................................................. 10 
4LED and Buzzer Behavior................................................................................................. 11 
4.1 Disk Bay LED........................................................................................................... 11 
4.2 System Alarm LED .................................................................................................. 12 
5. Smart Fan Control............................................................................................................ 14 
6. Firmware Upgrade........................................................................................................... 17 
 

1Overview

IN WIN backplanes (without Expander) are high performance economical 8 solution

for users who has adequate SAS connection ports on motherboard or RAID/HBA card

to accommodate the disks in the system.

The passive backplanes support state-of-the art SAS3 12Gbps HDD/SSD and also

backward compatible with SAS 6Gbps, SATA 6Gps and SATA 3Gps HDD/SSD.

Basically, one single SFF-8643 miniSAS connector can support up to 4 disk bays. There

are several miniSAS connectors and 29-pin high profile disk connectors on the

backplanes depends on the product model.

The backplane is implemented with smart fan control feature to support wide variety

of fan modules by auto-calibrating the installed fan modules at system boot. This

feature provides an efficient way to control the thermal heat exhaustion by sensing

the temperature in the enclosure. The fan module speeds up and down upon the

temperature rises and falls in the enclosure.

Along with the smart fan control feature, a system alarming feature is also

implemented to alert users in case Fan module failure and/or system overheat occurs

by illuminating the LED indicator and sounding the buzzer at the same time. Users

can then detect issue and take corresponding actions to resolve the issue according

to the failure type. As soon the issue disappears the alarm stops.

2 Jumper Settings

System indicators and buttons are designed for chassis by connecting 2-wire

cable from front panel (if existed) to the jumpers on the backplane to facilitate

the alarm system accordingly.

The definitions of the Jumpers on the backplane are as below.

Jumper

Name

Function

Details

Model

CN1

Setting Function

1FAN FAIL LED +

2FAN FAIL LED –

3TEMP FAIL LED +

4TEMP FAIL LED -

FAN FAIL LED illuminates

when the fan module

speed is going down below

75% of its expected RPM

TEMP FAIL LED illuminates

when enclosure

temperature is going

higher than the setting of

TEMP ALERT of CN2

IW-RS110-02M

IW-RS208-02M

IW-RS212-02M

CN2

Setting Function

1-2 Short MAX FAN RPM=60%

3-4 Short MAX FAN RPM=80%

1-2 & 3-4 Short MAX FAN RPM=100%

5-6 Open TEMP ALERT 45C

5-6 Short TEMP ALERT 55C

RPM=60% limited the

highest FAN RPM to 60% of

full speed

RPM=80% limited the

highest FAN RPM to 80% of

full speed

RPM=100% allows fan

module to its full speed

TEMP ALERT 45C set alert

triggered at 45 degree in

Celsius.

IW-RS110-02M

IW-RS208-02M

IW-RS212-02M

TEMP ALERT 55C set alert

triggered at 55 degree in

Celsius.

When the temp alert

triggered, the TEMP FAIL

LED of CN1 illuminates and

buzzer sounds in 2

consecutive beeps,

BB—BB—BB--.

JM1

Setting Function

1-3 Short SGPIO_0 Enable

3-5 short SGPIO_0 Disable

2-4 Short SGPIO_1 Enable

4-6 Short SGPIO_1_Disable

To enable/disable SGPIO

function. When SGPIO is

enabled, the Green and

RED LED for disk bay is

controlled by MCU by

sensing the SGPIO signals

sent by RAID/HBA car.

SGPIO_0 is for disk 0 ~ 3

SGPIO_1 is for disk 4 ~ 7

IW-RS110-02M

IW-RS208-02M

IW-RS212-02M

IW-SK35

IW-R400-03N

JM2

Fail_LED_0~3

Fail_LED_0~3 pins are for

use when SGPIO is set to

disabled for disk bay 0 ~ 3

IW-RS110-02M

IW-RS208-02M

IW-RS21202M

JM3

Fail_LED_4~7

Fail_LED_4~7 pins are for

use when SGPIO is set to

disabled for disk bay 4 ~ 7

IW-RS110-02M

IW-RS208-02M

IW-RS212-02M

JM4

Fail_LED_8~11

Fail_LED_8~11 pins are for

use when SGPIO is set to

disabled for disk bay 8 ~ 11

IW-RS110-02M

IW-RS212-02M

JM5

Setting Function

2-4 Short SGPIO_2_Enable

4-6 Short SGPIO_2_Disable

SGPIO_2 is for disk 8 ~ 11

IW-RS110-02M

IW-RS212-02M

JM5

Setting Function

1-2 Short SGPIO_0_Enable

2-3 Short SGPIO_0_Disable

To enable/disable SGPIO

function. When SGPIO is

enabled, the GREEN and

RED LED for disk bays are

controlled by MCU by

IW-SK34

IW-MS04

IW-MS08

IW-MS08-A

IW-PLV Tower

IW-PLG Tower

sensing the SGPIO signals

sent by RAID/HBA card.

SGPIO_0 is for disk 0 ~ 3

SGPIO_1 is for disk 4 ~ 7

IW-SK35

IW-R400-03N

JS1

Setting Function

1Fail_LED_1

2Fail_LED_2

3Fail_LED_3

4Fail_LED_4

Fail_LED pins are for use

for disk bay 1 ~ 4 fail LED

when SGPIO is set to

disabled

IW-SK34

IW-MS04

IW-MS08

IW-MS08-A

IW-PLV Tower

IW-PLG Tower

JS1, JS2

SGPIO Header

The SGPIO header for

connecting to

Motherboard or RAID/HBA

card which equipped with

SGPIO function.

IW-SK35

IW-R400-03N

JS3

Setting Function

1 Fail_LED_1

2 Fail_LED_2

3 Fail_LED_3

4 Fail_LED_4

5 Fail_LED_5

Fail_LED pins are for use

for disk bay 1 ~ 5 fail LED

when SGPIO is set to

disabled

IW-SK35

IW-R400-03N

3Connectors

3.1 29-pin SAS HDD connector

The Backplane has number of 29-pin disk connectors supporting SATA 3G, 6G,

SAS 6G and 12G disk.

Different model has different type and different of 29-pin disk connector

according to design and application.

Model

Number of 29-pin

disk connector

Type

Supported Disk

IW-RS104-02M

Horizontal Type

SATA, SAS

IW-RS110-02M

Low Profile

SATA, SAS

IW-RS208-02M

High Profile

SATA, SAS

IW-RS212-02M

High Profile

SATA, SAS

IW-SK34

IW-MS04

IW-MS08

IW-MS08-A

IW-PLV Tower

IW-PLG Tower

High Profile

SATA, SAS

IW-SK35

IW-R400-03N

High Profile

SATA

3.2 SFF-8643 Mini-SAS connector:

Different model of backplane has different number of miniSAS connector.

Most of backplanes are supporting 12G SAS connection while SK35/ IW-

R400-03N is supporting 6G SATA only.

Since these backplanes has no expander. All the miniSAS connectors or

SATA connectors are directly wired to the 29-pin disk connectors.

Model

Number of miniSAS connector

Note

IW-RS104-02M

IW-RS110-02M

IW-RS208-02M

IW-RS212-02M

IW-SK34

IW-MS04

IW-MS08

IW-MS08-A

IW-PLV Tower

IW-PLG Tower

IW-SK35

IW-R400-03N

SATA connector

3.3 4-Pin power receptacle

Different model of backplane has different number of 4-pin power

connector according to the disk number the backplane supports.

Model

Number of 4-pin Power connector

Note

IW-RS104-02M

IW-RS110-02M

IW-RS208-02M

IW-RS212-02M

IW-SK34

IW-MS04

IW-MS08

IW-MS08-A

IW-PLV Tower

IW-PLG Tower

IW-SK35

IW-R400-03N

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere InWin Netzwerkspeicherserver Handbücher

InWin

InWin Cobra IW-RS424-07 Bedienungsanleitung

InWin

InWin IW-RS108-07 Bedienungsanleitung

InWin

InWin IW-RS224-07 Bedienungsanleitung

InWin

InWin IW-RS118-03 Bedienungsanleitung

InWin

InWin IW-RN224-03 Bedienungsanleitung

InWin

InWin IW-RS424-02M Bedienungsanleitung

InWin

InWin IW-RS436-07 Bedienungsanleitung

InWin

InWin IW-RS248-03 Bedienungsanleitung

Beliebte Netzwerkspeicherserver Handbücher anderer Marken

HP NetStorage 6000 Bedienungsanleitung

Seagate

Seagate U10 ST320423A Bedienungsanleitung

Synology

Synology RackStation RS816 Handbuch

D-Link

D-Link ShareCenter Pro DNS-1200-05 Bedienungsanleitung

Avid Technology

Avid Technology VideoRAID ST Sicherheitsleitfaden

Western Digital

Western Digital My Cloud Home Duo Bedienungsanleitung

PrimeArray

PrimeArray 4xxx Bedienungsanleitung

Buffalo

Buffalo TeraStation WSS WSH5010N6 Bedienungsanleitung

Planex

Planex MZK-NAS01SG Bedienungsanleitung

Intel

Intel SS4000-E - Entry Storage System NAS Server Bedienungsanleitung

Synology

Synology RS2212+ Bedienungsanleitung

Allnet

Allnet ALL69000 Bedienungsanleitung

Adaptec

Adaptec 5325301580 Bedienungsanleitung

Motorola

Motorola EXORdisk II Bedienungsanleitung

Sony

Sony XDAAI1PK Bedienungsanleitung

Cisco

Cisco Linksys NAS200 Original Betriebsanleitung

Sans Digital

Sans Digital MR4UT6G Bedienungsanleitung

AIC

AIC FB128-LX Bedienungsanleitung