ION PATHFINDER GO Bedienungsanleitung

Pathfinder™Go

User Guide

( 2 – 11 )

Appendix

( 12 )

SUPPORT

ionaudio.com/support

Tap or click

for technical

support.

User Guide

Introduction

Thank you for purchasing the PathfinderTM Go speaker. At ION, your entertainment is as

important to us as it is to you. That’s why we design our products with one thing in mind—to

make your life more fun and more convenient.

Note: Before you first use the product, please fully charge the batteries. Your unit was

purposely shipped with a reduced battery charge to ensure safe transit. For optimal charging,

power off the speaker while charging.

Use the included USB-A to USB-C®cable to connect the unit to a 5V, 2A power adapter (not

included) connected to a power outlet and let it charge for up to 3 hours (depending on the

specifications of your adapter). This helps ensure the longest life for your battery.

Box Contents

PathfinderTM Go

USB-A to USB-C®Charging Cable (3.28 ft / 1 m)

Quickstart Guide

Support

For the latest information about this product (documentation, technical specifications, system

requirements, compatibility information, etc.) and product registration, visit ionaudio.com.

For additional product support, visit ionaudio.com/support.

Setup

Outdoor Use and Care

Though PathfinderTM Go is water-resistant and able to tolerate splashing water, please review

the tips below to get the best performance from your PathfinderTM Go:

•Bring PathfinderTM Go indoors during extreme weather.

•Please do not place PathfinderTM Go in standing water.

•Please do not connect the power adapter to a PathfinderTM Go in a wet environment. Make

sure the power input, power adapter, and power outlet are all completely dry before

making any connections.

•WARNING: Keep any non-water-resistant devices (phones, music players, etc.) in a dry

place where they will not be affected by water and cause a risk of electric shock.

Charging & Battery Information

For the quickest charging time, power off PathfinderTM Go and use the included USB-A to

USB-C®cable to connect the USB-C®charging port on the rear panel of the speaker to a USB

power adapter (DC 5V 2A, not included) connected to a power outlet, or your computer

(powered on). A full charge can take up to 3 hours, depending on the specifications of your 5V,

2A adapter.

The lightning bolt icon on the display will light up when PathfinderTM Go is

connected to a power source and charging. The battery icon will fill to

display the battery life percentage. When charging is complete, the lightning

bolt icon will disappear, and the battery icon will be completely filled.

If no audio is played through the PathfinderTM Go speaker for 15 minutes, the unit will enter a

standby mode to conserve battery life. This may mean the Bluetooth signal is paused, no

audio is coming through a device connected to the aux port, or the volume is set to 0. To

wake the unit, simply resume audio signal or press any button.

Here are some other recommendations for getting the longest life from the internal battery.

General Usage Fully charge the battery before using it.

Charge the battery completely after each use.

Do not charge the battery in exceedingly hot (greater than 90°F/32°C) or

exceedingly cold (less than 32°F/0°C) temperatures.

Storage For best product longevity, do not store at exceedingly hot (greater than

90°F/32°C) or exceedingly cold (less than 32°F/0°C) temperatures.

It is acceptable to leave your sound system plugged in. This will not

overcharge the battery.

If you leave the battery level low and do not charge it for 3 months, it may

permanently lose capacity.

Repair If the battery fails to charge, contact ION Audio at ionaudio.com.

Disposal Bring the unit to a recycling center or dispose of in accordance with local

ordinances.

Features

Top Panel

3 4 5 6

7 7

1. Power Button: Press and hold this button to turn PathfinderTM Go on and off.

2. Boom ButtonTM:Press to simultaneously enhance the bass EQ and volume and activate a

light show that pulses to the beat of the music.

3. Bluetooth®Button: Press this button to enter Bluetooth pairing mode. When connected to

a Bluetooth device, double-press this button to disconnect a paired device and re-enter

pairing mode, or single-press to disconnect a paired device and enter Aux mode. See

Operation > Bluetooth Connecting with PathfinderTM Go to learn how to connect a

Bluetooth device.

Press and hold this button to enable or disable voice prompts.

4. Source Button: Press this button to cycle between FM, USB, and Aux modes.

5. Lights Button: Press this button to switch between Color Cycle, Beat Sync, and Solid Color

light modes, or to turn the lights off.

6. Stereo-LinkTM / Repeat Button: See Operation > Stereo-LinkTM: Syncing Two Speakers

to learn more.

In USB playback mode, press this button to cycle between repeat modes. See Operation >

USB Playback Mode to learn more.

7. Previous / Next Buttons: In FM mode, press these buttons briefly to go to the previous or

next station. Press and hold these buttons to seek the previous or next strong station.

In Bluetooth and USB modes, press these buttons to go to the previous or next track.

8. Play/Pause / Presets Button: Press this button to play and pause Bluetooth or USB

audio.

In FM mode, use this button to save and recall radio presets. See Operation > Using the

Radio to learn more.

9. Volume Up/Down Buttons: Press these buttons to adjust the speaker’s volume. The

current volume level will be shown on the display.

Press and hold both + and – buttons for 5 seconds to reset the speaker to factory settings.

Display

The PathfinderTM Go display shows information related to its current operation, including:

•Battery Indicator (): The battery icon displays the battery life percentage. When fully

charged, the battery icon will be completely filled.

•Stereo-LinkTM Icon ( ): The Stereo-LinkTM icon will display when PathfinderTM Go is

linked to another speaker. The Stereo-LinkTM icon will be off when a single speaker is

used. See Operation > Stereo-LinkTM: Syncing Two Speakers below for instructions

on how to link two speakers.

•Bluetooth Icon ( ):The Bluetooth icon will display when a device is paired to

PathfinderTM Go. See Operation > Bluetooth Connecting with PathfinderTM Go to learn

how to connect a Bluetooth device.

•Source Icons (FM, AUX, USB): These icons will indicate whether PathfinderTM Go is in

FM, Aux, or USB playback modes.

•Lightning Bolt Icon ( ): The lightning bolt icon will display when PathfinderTM Go is

connected to a power outlet.

•BOOM Icon: The BOOM icon will display when the Boom ButtonTM is pressed. The

icon will be off when the function is deactivated.

•Radio Station: The numerals on the right side indicate the current radio station that is

selected. This area will also show the volume and the current repeat mode when either

are changed.

Rear Panel

Note: Pull the tab on the protective rubber panel to release it and access the rear panel ports.

1. USB-A Playback/Device Charging Port: Connect a USB drive here for USB mode

playback. See Operation > USB Playback Mode for more information.

PathfinderTM Go includes a power bank function, which allows you to charge a

compatible 5V, 1A smartphone, tablet, or other device using the unit’s internal battery

(Capacity: 2000mAh/11.1V 22.2Wh) by connecting a cable here. See Operation >

Using the USB Charge Port for more information.

2. Aux Input: Connect an MP3 or other audio player to PathfinderTM Go here using a 1/8”

(3.5 mm) auxiliary cable (not included). See Operation > Connecting an Audio Device

Using the Aux Input for more information.

3. USB-C®Charging Port: Connect the USB-C®end of the included cable to PathfinderTM

Go here, then connect the USB-A end to a 5V, 2A USB power adapter (sold separately)

and plug it into a power outlet, or your computer (powered on).

Operation

App Control

IMPORTANT: To ensure the best possible experience with the app, use the most current

Android OS or iOS on your device.

Follow these steps to download the free app on your device:

1. Open the Apple App Store or Google Play on your device. Then, search for the ION

Sound ControlTM app.

2. Follow the on-screen instructions to download and install the app. Once downloaded,

the ION Sound ControlTM app will appear on your device's home screen.

3. Connect your device to PathfinderTM Go via Bluetooth. See Operation > Bluetooth

Connecting with PathfinderTM Go to learn how to do this.

4. Open the ION Sound ControlTM app. If prompted, allow the app to access your device's

Bluetooth and Location Services.

5. Follow the steps on screen to find and connect to your PathfinderTM Go. Once connected,

you can control various functions of the speaker, such as:

•Volume: Adjust the speaker's volume.

•EQ: Adjust the speaker's equalization.

•Voice Prompts: Enable or disable the voice prompts.

•Lights: Change the light modes.

•Battery Life: Check the speaker’s battery life status.

•Support: Visit ionaudio.com, contact Technical Support, and view Warranty

information and Frequently Asked Questions.

Bluetooth Connecting with PathfinderTM Go

1. Turn on PathfinderTM Go by holding down the Power button for 2 seconds. PathfinderTM Go

will automatically enter Bluetooth pairing mode.

2. Navigate to your device’s Bluetooth setup screen, find Pathfinder Go, and connect. The

Bluetooth icon will appear in the display, and you will hear “Connected” (if voice prompts

are enabled).

Note: Do not connect to iSP165_BLE; this is reserved exclusively for connecting to the

ION Sound ControlTM app. If you experience trouble in connecting, select “Forget this

Device” on your Bluetooth device and try to connect again.

3. Now you can use the buttons on the front panel to control audio playback:

•Press the Play/Pause button to play or pause the current track.

•Press and quickly release the +button to increase the volume.

•Press and quickly release the - button to decrease the volume.

•Press the >button to skip to the next track.

•Press the < button to revert to the beginning of the current track. Repeat this action

within 1 second to skip to the previous track.

To disconnect a paired device, do any of the following:

•Turn off Bluetooth from your device’s Bluetooth settings. The speaker will enter

Bluetooth pairing mode to make it available for another device.

•Press and hold the Bluetooth button to disconnect and re-enter pairing mode.

•Briefly press the Bluetooth button to disconnect and enter Aux mode.

When you disconnect a Bluetooth device, you will hear “Bluetooth disconnected” if voice

prompts are enabled.

Stereo-LinkTM: Syncing Two Speakers

Tip: PathfinderTM Go can sync audio with other PathfinderTM Go speakers or with the ION

PathfinderTM 320°.

1. Be sure to disconnect Bluetooth devices before attempting to pair speakers using Stereo-

LinkTM. Press and hold the Bluetooth button to do this.

2. Press and hold the Link button on each PathfinderTM speaker. A beeping sound will be

heard and the link icon in each display will flash while a link is being established. Please

allow 10 to 30 seconds for the speakers to link.

Note: Speakers should be within 50’ (15 m) of each other to properly link. The closer the

speakers are, the faster they will link.

Note: To exit Stereo-LinkTM mode, double-press the Link button again.

3. Once the speakers are linked, the Link icon will be lit solid on both units.

4. Select which unit will be the “primary” speaker by pressing and releasing the Bluetooth

button on that unit.

5. Navigate to your device's Bluetooth settings menu and select Pathfinder Go to connect.

When the connection is successful, you will hear "Bluetooth Connected" from the primary

speaker (if voice prompts are enabled). When Bluetooth audio playback begins, you

should hear it through both speakers. The primary speaker will play the left channel while

the secondary speaker plays the right channel. Playback controls are active on both

speakers.

Note: Radio, Aux, and USB modes will be disabled when Stereo-LinkTM is active.

6. To exit Stereo-LinkTM mode, double-press the Link button. You will hear "Bluetooth

disconnected" from the primary speaker to indicate the link has been broken (if voice

prompts are enabled).

Using the Radio

To use the radio, press the Source button so that FM is selected and shown on the display.

While in FM mode, briefly press the Previous and Next buttons (</>) to move to the previous

or next station. Press and hold the </>buttons to seek for the next strongest station in that

direction.

To save a radio station as a preset:

1. Press and hold the Play/Pause button.

2. Use the </>buttons to select a preset number, 1–12, shown on the display.

3. When you have selected the desired preset number, quickly press and release the

Play/Pause button again to save it.

To recall a previously saved preset, briefly press the Play/Pause button to cycle between

the 12 presets.

USB Playback Mode

Connect a USB drive to the USB-A port on the rear panel of PathfinderTM Go to play music files.

Once the drive is connected, press the Source button until USB is selected and shown on the

display.

While in USB playback mode, you can use the following buttons on the front panel to control

playback:

•Press the Play/Pause button to start or stop USB playback.

•Use the Previous and Next buttons (</>) to skip to the previous or next USB track.

•Briefly press the Link button to cycle between repeat modes, as shown on the display:

oALL: Repeats all tracks on the USB drive.

oFOLd: Repeats all tracks in the current folder of the USB drive.

oOnE: Repeats the currently playing track.

orAn: Randomly shuffles the track order.

Using the USB Charge Port

To use the USB charge port:

1. Connect a USB type-A cable to the USB Charge

Port on the rear panel of your PathfinderTM Go

speaker (see image).

2. Connect the other end of the cable to the

charging input on your smartphone, tablet, or

other compatible device.

Andere Handbücher für PATHFINDER GO

Inhaltsverzeichnis

Andere ION Sprecher Handbücher

ION

ION PARTY BOOM Bedienungsanleitung

ION

ION Party Rocker Plus Bedienungsanleitung

ION

ION Total PA Pro Bedienungsanleitung

ION

ION BLOCK ROCKER BLUETOOTH Bedienungsanleitung

ION

ION Party Boat Bedienungsanleitung

ION

ION Total PA Max Bedienungsanleitung

ION

ION Pathfinder 4 Bedienungsanleitung

ION

ION Aquaboom Bedienungsanleitung

ION

ION Flash Cube Bedienungsanleitung

ION

ION BLOCK PARTY Bedienungsanleitung

ION

ION TAILGATER BLUETOOTH Bedienungsanleitung

ION

ION Sound Stone 2 Bedienungsanleitung

ION

ION PARTY POWER Bedienungsanleitung

ION

ION Pro Glow 8 Bedienungsanleitung

ION

ION Party Rocker Live Bedienungsanleitung

ION

ION DESK ROCKER Bedienungsanleitung

ION

ION Tiki Sounds Bedienungsanleitung

ION

ION Game Day Bedienungsanleitung

ION

ION PROFILE LP Bedienungsanleitung

ION

ION Block Rocker Plus Bedienungsanleitung

ION

ION Sport Bedienungsanleitung

ION

ION Cornerstone Bedienungsanleitung

ION

ION patio mate Bedienungsanleitung

ION

ION iPA23B Bedienungsanleitung

Beliebte Sprecher Handbücher anderer Marken

argon audio

argon audio IE20 Bedienungsanleitung

Denon

Denon SC-N7 Bedienungsanleitung

Gemline

Gemline Ace 3952 Bedienungsanleitung

Focal

Focal ON WALL 300 Bedienungsanleitung

HEADRUSH

HEADRUSH Maximus HRSP 5024 Bedienungsanleitung

SoundLogic

SoundLogic BCCS-6/6395 Bedienungsanleitung

Peavey

Peavey DTH 218 Bedienungsanleitung

Avantree

Avantree Pluto Air Bedienungsanleitung

Morel

Morel Integra Series INTEGRA OVATION 4 Bedienungsanleitung

Oppo

Oppo SONICA Bedienungsanleitung

Bose

Bose SoundLink Wireless Music System Bedienungsanleitung

Rocksteady

Rocksteady Stadium Bedienungsanleitung

Bowers & Wilkins

Bowers & Wilkins 4 Bedienungsanleitung

Sonance

Sonance SONOS OUTDOOR Series Bedienungsanleitung

Electro-Voice

Electro-Voice EVID FM4.2 Bedienungsanleitung

Pioneer

Pioneer XW-HTD630 Bedienungsanleitung

Onn

Onn BWA16AA002 Bedienungsanleitung

HP GL313AA - USB Speakers PC Multimedia Bedienungsanleitung