ITS Commander 1RU8126MS Bedienungsanleitung
USER MANUAL
MODEL: 1RU8126MS
Remote Power Management & Monitoring System
2000 E Lake Mary Blvd
Sanford, FL 32773
(407) 894-8851 (800) 866-5699
contactus@ITSCOMMANDER.com
WWW.ITSCOMMANDER.COM
Read this manual before using this product. Failure to follow the instrucons and safety precauons in this
manual can result in serious injury.
Keep this manual in a safe locaon for future reference.
For other ITS Commander™ products, previous rmware versions and updates please go to our webpage at
hp://www.ITSCOMMANDER.com
… Take Control
USER MANUAL
V5.0 ITS COMMANDER™ Model: 1RU8126MS
Page 2
Trademark and Copyright Informaon
This document is Copyright©2014 by Earnest Products Inc. dba Southern Manufacturing.
All rights reserved.
ITS Commander ™, ITS Commander … Take Control™, and Intelligent Transportaon Systems Commander
are trademarks of Earnest Products Inc. 2014.
All other company names, logos, or trademarks referenced herein are the property of their respecve owners, and are for
instrucve, demonstrave or example purposes only. No endorsement of the above referenced companies or products by
Earnest Products Inc. dba Southern Manufacturing should be assumed or implied
No part of this document shall be reproduced without explicit wrien
permission from Earnest Products Inc. dba Southern Manufacturing.
Earnest Products Inc. dba Southern Manufacturing, hereaer referred to as EP, shall not be held liable for any damage
or injury involving its enclosures and/or its remote power manager and monitoring system if used or operated in any
manner or subject to any condion inconsistent with its intended purpose, or if installed or operated in an unapproved
manner, or improperly maintained.
Although reasonable eorts have been made to ensure the informaon contained herein is as useful and as accurate
as possible, EP assumes no responsibility for its applicaon, usefulness, or completeness. EP will not be held
responsible or liable under any circumstances for any damages or losses. Damages or losses include direct, indirect,
special, incidental, or consequenal damages or losses arising from the use of any informaon contained herein or the
use of any products or services referenced.
EP reserves the right to change ITS Commander™ specicaons, features, warranes, documentaon, pricing, terms
and condions at any me, without noce.
USER MANUAL
V5.0 ITS COMMANDER™ Model: 1RU8126MS
Page 3
Table of Contents
1. Introducon ................................................................................. 4
Package .......................................................................... 4
Safety.............................................................................. 5
Cercaons................................................................... 6
2. General Informaon
Specicaons.................................................................. 7
Features.......................................................................... 8
3. Installaon
Mounng ........................................................................ 9
Installaon ...................................................................... 10
Set Up ............................................................................. 11
4.User Interface Tabs
Summary ........................................................................ 18
Names and Nocaons................................................. 19
Scheduler........................................................................ 19
Live Log........................................................................... 25
Conguraon.................................................................. 26
Conguraon File............................................................ 26
Security........................................................................... 27
Firmware......................................................................... 27
5. Technical Assistance ..................................................................... 28
6. Warranty ...................................................................................... 29
… Take Control
USER MANUAL
V5.0 ITS COMMANDER™ Model: 1RU8126MS
Page 4
Package
The ITS Commander™ is designed to improve system reliability and lower the cost of
ownership through reduced maintenance costs. The system benets both the owning
agency and maintaining agency by promptly sending signals of an abnormal situaon,
allowing roune monitoring of crical equipment, and providing the capability to
remotely control outlets to reboot equipment. These features can reduce
unnecessary trips to inspect or service the cabinet thereby saving money.
Southern Manufacturing’s ITS Commander™ may be integrated with ITS enclosures
from the factory. Power panel and factory installed equipment are pre-wired and
connected.
The contents of your package are:
(1) ITS Commander™ Unit
(2) Adjustable rack mounng brackets
(1) Power cord
(1) Temperature Probe
(1) Users Manual
MIB, frequently asked quesons and support provided at www.ITSCOMMANDER.com
Introducon
… Take Control
USER MANUAL
V5.0 ITS COMMANDER™ Model: 1RU8126MS
Page 5
SAFETY
Safety Symbols
Read this manual before using this product. Failure to follow the instrucons and safety precauons in this
manual can result in serious injury .
Keep this manual in a safe locaon for future reference.
The following symbols have been placed thought this manual to reduce the risk of serious injury or
death and to ensure the connued safe operaon of this product.
NOTE
Notes provide addional informaon when compleng a specic task or procedure. Notes will be designat-
ed by a check mark inside a circle, the word NOTE and a line beneath which the informaon appears.
CAUTION
Cauon is used to provide safety informaon to prevent damage to the product or connected equipment.
Cauon is designated by a yellow triangle with a black exclamaon mark in the center, the word CAUTION
and a line beneath which the informaon appears
USER MANUAL
V5.0 ITS COMMANDER™ Model: 1RU8126MS
Page 6
Cercaons and Compliances
NEMA
The ITS Commander™ is designed, tested and manufactured to meet the requirements of the
following naonal safety standards:
FCC Part 15 Class B
This equipment has been tested and found to comply with the limits of Part 15 of the FCC Rules.
These limits are designed to provide reasonable protecon against harmful interference in a
residenal installaon. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instrucons, may cause harmful interfer-
ence to radio communicaons. However, there is no guarantee that interference will not occur
in a parcular installaon. If this equipment does cause harmful interference to radio or televi-
sion recepon, which can be determined by turning the equipment o and on, the user is en-
couraged to try to correct the interference by one or more o f the following measures (1) Reori-
ent or relocate the receiving antenna (2) Increase the separaon between the equipment and
receiver (3) Connect the equipment into an outlet on a circuit dierent from that to which the
receiver is connected (4) Consult the dealer or an experienced radio/TV technician for help.
NEMA TS 2-2003 v02.06 Secons 2.2.7.3—2.2.7.6 , 2.2.8.4 and 2.2.9
This equipment has been tested and found to comply with the NEMA TS 2-2003 environmental
requirements as are applicable for this device. The requirements applicable are (1) Operang
voltage (2) Operang Frequency (3) Temperature and Humidity (4) Ambient Temperature (5)
Humidity (6) Vibraon and (7) Shock.
This equipment has been and found to comply with UL requirements and standards.
Standard for Informaon Technology Equipment - Safety - Part 1: General Requirements, UL
60950-1 and CAN/CSA C22.2 No. 60950-1-07.
Cercate Number 20150410-E469794
Report Reference E469794-A1-UL
Issue Date 2015-APRIL-10
USER MANUAL
V5.0 ITS COMMANDER™ Model: 1RU8126MS
Page 7
MODEL 1RU8126MS
INPUT
Voltage Range 89 VAC- 135 VAC, 120 VAC (Nominal) 1
Rated Current 12 Amps
Circuit Breaker 15 Amps
Frequency Range 60 hertz ± 3 Hz
AC Inlet IEC C16, 15A, 250 VAC, 60 Hz
Power Cord NEMA 5-15P to IEC-C15, 15 A / 125 V
Surge Suppression 10 kA, L-N
OUTPUT
Outlet Quanty 8
Outlet Type NEMA 5-15R, 15A / 125 VAC, 60 Hz
Dry Contact Input Quanty 12
Dry Contact Input Connector 24 Posion, Screw-less Push-In terminal, 16-24 AWG
Relay Quanty 6
Relay Switching Voltage 250 VAC, 125 VDC Max
Relay Contact Form SPST-NO (1 Form A)
Relay Contact Rang (Current) 10 A
Relay Connector 12 Posion, Screw Terminal, 12-22 AWG
Temperature Sensor Thermistor, R @ 25°C = 10k Ω, ± 1 % ( 4.1 feet /1.25m)
Humidity Sensor 26mV / % RH ±3% RH, Linear, 3.3 V Supply
Temperature / Humidity Connector 5 Posion, Screw terminal, 16-30 AWG
Analog Inputs 2
Analog Input Connector 4 Posion, Screw terminal, 16-30 AWG
ENVIRONMENTAL
Operang Temperature -34°C (-30°F) to +74°C (+165°F) 1
Operang Humidity 0—95 % Relave Humidity1
Storage Temperature, Humidity -45°C (-50°F) to +85°C (+185°F) / 0-100% 1
OTHER
Dimensions 1.7” x 5.5” x 19”
Rack Space 1 RU (Rack Unit)
Network 10/100/1000 Base-T Ethernet Port, Auto MDI-X
Alert Types Email / SMS / User Interface / SNMP
Clock NTP
Scheduling 100 events, ON—OFF—RESET
NOTES 1. Per NEMA TS2-2003v02.06
Specicaons
… Take Control
USER MANUAL
V5.0 ITS COMMANDER™ Model: 1RU8126MS
Page 8
ITEM DESCRIPTION
1Input circuit breaker, 15A
2Outlets, 15 A, Labeled A trough H
3Unit Status indicator, Green
4Outlet Status indicator, Green, labeled
A through H
5LCD Screen
6 Select Buon
7Ethernet Port
Features
1
2
4
3
6
7
8
8
5
9
10
11
12
13
14
ITEM DESCRIPTION
8Adjustable rack mounng ears
9I/O Expansion Port
10 Analog Inputs
11 Temperature and Humidity Inputs
12 Dry Contact inputs 1-12
13 Relay contacts 1-6
14 AC Power In, IEC C16 Inlet
FRONT
REAR
USER MANUAL
V5.0 ITS COMMANDER™ Model: 1RU8126MS
Page 9
Mounng
Procedure
The ITS Commander is provided with mounng brackets for a standard 19-inch
rack. Each mounng ear is removable and adjustable towards the rear or the
front .
Choose the desired mounng bracket locaon.
1. Remove retaining screws from unit body
2. Choose the locaon of the bracket, by aligning the mounng bracket
holes to the unit body.
3. Secure using retaining screws
4. Repeat for the other side.
Bracket Locaon Opons
Front
Recessed
Front
Flush
Front
Deep Recessed
Rear
Recessed
Rear
Flush
Rear
Deep Recessed
NOTE
Ensure to replace all screws in the mounng holes. Empty screw holes should be lled.
5. Mount in a standard EIA 19” Rack with (4) #10 screws.
USER MANUAL
V5.0 ITS COMMANDER™ Model: 1RU8126MS
Page 10
Installaon
Stand Alone Conguraon
1. Connect an Category 5 (CAT 5) patch cable to the ITS Commander Ethernet port. A straight-through or crossover cable may
be used.
2. Connect the other end of the RJ45 patch cable to the user interface (Laptop, PC, etc.).
1. Connect an RJ45 patch cable to the ITS Commander Ethernet Port.
2. Connect the other end of the RJ45 Patch cable to the network switch.
3. User interface may be accessed using a wireless router or direct connecon to the network.
Network Conguraon 1 Network Conguraon 2
CAUTION
Stand alone conguraon does not provide network me synchronizaon (NTP). Logging, Scheduling and
Nocaon features will not be available
Network Conguraon
Inhaltsverzeichnis
