Ivoclar Vivadent Programat CS2 Handbuch

Dear Customer

Thank you for having purchased the Programat CS2. In order to render the setting-up and the initial use of the furnace as easy as

possible, we have prepared these short instructions.

These short instructions replace by no means the detailed Operating Instructions. We therefore kindly ask

you to thoroughly read the Operating Instructions and follow the notes contained therein.

Enjoy working with the Programat CS2.

english

Programat®CS2

Short Instructions

Programat_CS2_KA-WE1_644407.indd 4 13.08.13 12:52

1 1

1 2

1. Installation

Remove the furnace components from their packaging and place the

unit on a suitable table. Please observe the instructions on the outer

packaging. Make sure the voltage indicated on the rating plate com-

plies with the local power supply. If this is not the case, the furnace

must not be connected.

Mounting the cooling tray

Remove both screws for the cooling tray (1).

Place the cooling tray (2) on the frame plate (3).

Make sure that the cooling tray is correctly positioned on the

frame plate.

Secure the cooling tray with the two screws (1).

Placing the ﬁring plate

The ﬁring plate (4) can now be placed on the ﬁring plate holder (5).

Mounting the furnace head

The furnace head is best mounted with the back of the furnace pointing

towards the user. Lift the furnace head with both hands as shown in the

picture and place it on the furnace head mounting.

Mount the furnace head as shown in the picture until you feel it click

into place. Make sure that neither the ﬁring plate nor the insulation is

damaged during the mounting of the furnace head.

Programat_CS2_KA-WE1_644407.indd 5 13.08.13 12:52

11 14

Establishing the connections

Connect the cables of the furnace head with the furnace base.

Proceed as follows:

- Connect vacuum hose (6).

- Insert the thermocouple plug (7). (Make sure that the polarity of

the plug is correct.)

- Insert the heater plug (8).

Insert the heater plug into the speciﬁed connector. Secure the heater plug by

rotating it by 45°.

Closing the protective cover

When all cables are correctly connected to the base, close the

cover (9) to protect the connections until you feel it click into place.

Mounting the connection cover

The connection cover (10) can now be mounted and secured with the

screws.

The furnace may only be used with the protective cover closed

and the connection cover mounted!

Establishing additional connections

Power connection

Make sure that the voltage indicated on the rating plate complies with the

local power supply. Subsequently, connect the power cord (11) with the

power socket of the Programat (12).

Connecting the vacuum pump

Connect the vacuum pump plug (13) with the vacuum pump socket (14). We

recommend using only the VP4 vacuum pump from Ivoclar Vivadent, since

this pump is especially coordinated with the furnace. If other pumps are used,

please observe and do not exceed the indicated maximum power consumption.

english

Programat_CS2_KA-WE1_644407.indd 6 13.08.13 12:52

2. User interface

The Programat CS2 has a wide-screen colour display. The keypad and the touch

screen allow user-friendly handling. By tapping slightly with your ﬁngertips

on the touch screen, the buttons are activated and the furnace performs the

requested function.

Keypad:

Home

Returning to «Home» screen (main menu)

Program key

Pressing once: The currently selected program is

displayed.

Pressing twice:

The program selection via number entry is accessed.

Power-saving key

This key activates the power-saving function.

Open furnace head Close furnace head

START (Start LED)

Starts the selected program. The green LED indicates that a pro-

gram is running. If the program is paused (1 x STOP), the Start LED

ﬂashes until renewed pressing of START results in the program being

resumed.

STOP

A running program can be paused by pressing the STOP

key and terminated by pressing the key twice. Movement

of the furnace head can be stopped at any time by pres-

sing STOP. Acoustic signals can be turned off by pressing

the STOP key.

Programat_CS2_KA-WE1_644407.indd 7 13.08.13 12:52

3. Operation

Turning the furnace on

Connect the power cord with the wall socket.

Switch the On/Off button to position «I».

After the self-test, the display shows the home screen or the last selected program.

To change to the home screen, press the HOME key. All functions of the Programat can

be selected from this screen.

Selecting the program

Select the required program.

Loading the furnace

Open the furnace head by pressing the OPEN FURNACE HEAD key and

place the object to be ﬁred with the ﬁring tray in the furnace.

Starting the program

Press the START key to start the program. The LED lights up green.

The program progress is shown in the display.

At the end of the program, the furnace head opens automatically. As soon as the

OSD lights up green, the furnace is available for the next program start.

english

Programat_CS2_KA-WE1_644407.indd 8 13.08.13 12:52

4. Editing the ﬁring parameters

Parameters are set or edited in two steps.

Example: Setting the holding temperature

In the program screen, press the [Parameter] button.

Press the [T] button.

Enter the desired holding temperature and conﬁrm

by pressing the green button.

The holding temperature has been changed successfully. All parameters

shown in the ﬁring curve can be changed / edited the same way.

Changing program options

By pressing the [Options] button, the menu for additional program options opens.

Example: Open the write-protection program

In the program screen, press the [Parameter] button.

Press the [Options] button.

Edit the desired option and return to the program view

by pressing the [Close] button.

Ivoclar Vivadent programs are partially blocked and cannot be edited.

Please refer to the Operating Instructions for more detailed information.

Programat_CS2_KA-WE1_644407.indd 9 13.08.13 12:52

Andere Handbücher für Programat CS2

Inhaltsverzeichnis

Andere Ivoclar Vivadent Dentalgeräte Handbücher

Ivoclar Vivadent

Ivoclar Vivadent Stratos 300 Bedienungsanleitung

Ivoclar Vivadent

Ivoclar Vivadent Bluephase Meter II Bedienungsanleitung

Ivoclar Vivadent

Ivoclar Vivadent 747825BE Bedienungsanleitung

Ivoclar Vivadent

Ivoclar Vivadent Cultura Bedienungsanleitung

Ivoclar Vivadent

Ivoclar Vivadent Programat P710 Bedienungsanleitung

Ivoclar Vivadent

Ivoclar Vivadent Programat EP 5010 G2 Bedienungsanleitung

Ivoclar Vivadent

Ivoclar Vivadent Programat EP 3010 G2 Handbuch

Ivoclar Vivadent

Ivoclar Vivadent Programat P310 G2 Handbuch

Ivoclar Vivadent

Ivoclar Vivadent Programat P710 G2 Handbuch

Ivoclar Vivadent

Ivoclar Vivadent OptraFine Bedienungsanleitung

Ivoclar Vivadent

Ivoclar Vivadent OptraGate Bedienungsanleitung

Ivoclar Vivadent

Ivoclar Vivadent Bluephase PowerCure Bedienungsanleitung

Ivoclar Vivadent

Ivoclar Vivadent 747827AA Bedienungsanleitung

Ivoclar Vivadent

Ivoclar Vivadent bluephase C8 Bedienungsanleitung

Ivoclar Vivadent

Ivoclar Vivadent Programat EP 5010 Bedienungsanleitung

Ivoclar Vivadent

Ivoclar Vivadent Odyssey 3Watt Bedienungsanleitung

Ivoclar Vivadent

Ivoclar Vivadent Programat CS2 Handbuch

Ivoclar Vivadent

Ivoclar Vivadent IvoBase Injector Handbuch

Ivoclar Vivadent

Ivoclar Vivadent Wieland Zenotec Select Hybrid Konfigurationshandbuch

Ivoclar Vivadent

Ivoclar Vivadent Programat EP 3000 G2 Bedienungsanleitung

Ivoclar Vivadent

Ivoclar Vivadent Programat P510 Handbuch

Ivoclar Vivadent

Ivoclar Vivadent Programat P510 G2 Bedienungsanleitung

Ivoclar Vivadent

Ivoclar Vivadent Programat EP3010 Bedienungsanleitung

Ivoclar Vivadent

Ivoclar Vivadent Programat CS6 Handbuch

Beliebte Dentalgeräte Handbücher anderer Marken

Vatech

Vatech EzRay Air VEX-P300 Bedienungsanleitung

KaVo

KaVo GENTLEpower LUX Contra-angle 25 LP Bedienungsanleitung

DENTSPLY

DENTSPLY SmartLite Focus Bedienungsanleitung

LM ProPower CombiLED Bedienungsanleitung

Owandy Radiology

Owandy Radiology RX-AC Bedienungsanleitung

mectron

mectron Piezosurgery Bedienungsanleitung

Belmont

Belmont CREDIA G1 Bedienungsanleitung

Planmeca

Planmeca Sovereign Classic Bedienungsanleitung

Bego

Bego Fornax T Bedienungsanleitung

Renfert

Renfert SYMPRO Kurzanleitung

Ateco

Ateco AT-301 Bedienungsanleitung

Nevadent

Nevadent NZPS 3 A1 Bedienungsanleitung

Muss Dental

Muss Dental MA 50 Technisches Handbuch

Diplomat

Diplomat Comfort Series Bedienungsanleitung

Dentatus

Dentatus Nyström Bedienungsanleitung

OMS

OMS DUKE EASY Handbuch

OMS

OMS LINEA PATAVIUM Handbuch

BRYANT DENTAL

BRYANT DENTAL Ignis Gesture A-494322 Bedienungsanleitung