IWILL N1021 Bedienungsanleitung
1
N1021 User Manual
2
For your personal safety and to avoid property damage, you must pay attention to the tips in this
manual. The warning is indicated as follows, depending on the level of risk.
Warning
Indicates that if no action is taken, the PC may be damaged beyond repair.
Attention
Indicates that an undesirable result or state may occur if the prompt is not followed.
The products/systems covered by this document are only permitted to be operated by qualified personnel
who meet all work requirements.
Warning
Yanling industrial PC products are only allowed to be used for the specified conditions of the catalogue
and related technical documents. If you want to use other company's products and components, you
must get the recommendation and permission from Iwill Technology (HongKong) LTD. Proper
transportation, storage, assembly, installation, commissioning, operation and maintenance are the
premise of product safety and normal operation. Permissible environmental conditions must be ensured.
You must pay attention to the prompts in the relevant files.
3
Disclaimer
Iwill Technology (HongKong) LTD reserves the right to change this manual and the products are subject to
change without prior notice. We are not responsible for any direct, indirect, intentional or accidental
damage or hidden dangers caused by improper installation or use.
Before ordering the product, please ask the dealer to know whether the product performance meets your
requirements.
All rights reserved. It may not be reproduced mechanically, electronically or in any other way without
permission.
Warranty：
Three years. If the customer has other requirements, the contract signed by both parties shall prevail.
For more information, please visit：
Website：www.iwilltech.cn
TEL：86-755-83291730
4
Catalogue
1. Product Introduction..........................................................................................................................................5
1.1 Product overview ............................................................................................................................5
1.2 product specification (Main parameter)........................................................................................5
2. Application Planning...........................................................................................................................................7
2.1 Transportation............................................................................................................................... 7
2.2 Storage........................................................................................................................................... 7
2.3 Open and inspection of delivered equipment.............................................................................8
2.4 Installation..................................................................................................................................... 8
3. Device Connection..............................................................................................................................................8
3.1 Precautions before device connection........................................................................................ 8
3.2 Connect the device to the power supply.....................................................................................8
4. Application specification....................................................................................................................................9
4.1 Product Photos.............................................................................................................................. 9
4.2 Product size drawing..................................................................................................................... 9
4.3 I/O Port.........................................................................................................................................10
4.4 Internal expansion port...............................................................................................................11
4.5 Status indicator LED.................................................................................................................... 12
4.6 Install the internal parts..............................................................................................................13
4.7 Mainboard................................................................................................................................... 14
4.8 Definition of Pins......................................................................................................................... 15
5. BIOS Setting...................................................................................................................................................... 16
6. Daily maintenance............................................................................................................................................19
7. Troubleshooting methods for Common hardware failure............................................................................ 20
5
1. Product Introduction
1.1 Product overview
Nano N1021 is low power fanless mini pc，It is with Intel Celeron J4125 quad core processor，support
Windows 10、Linux etc. OS，support 1*M.2 and 1*2.5” SATA HDD，very convenient to use.
The whole machine adopts aluminum alloy mold forming, simple structure, with good dustproof,
heat dissipation, anti-vibration and EMC performance, high reliability, strong environmental applicability.
1.2 product specification (Main parameter)
Processor
Intel Celeron J4125 (Quad core quad threading, 2.0GHz, Max turbo2.7GHz)
RAM
Support 1*DDR4 2400 SODIMM RAM Slot，Max support 8GB
BIOS
AMI UEFI BIOS
Display Chip
Integrated Intel ® UHD Graphics 600
Display Port
1*HDMI，2*DP（Support synchronous and asynchronous three display，Max
Resolution support 4096x2160 @ 60Hz）
Front I/O
1*Power Switch，4*USB3.0，2*USB2.0，1*COM
Rear I/O
1*DC，1*HDMI，2*DP，2*lan
1*SIM slot，1*Audio (support Mic and Speaker at the same time)
Expansion Slot
Support 1*M.2 2280 M-key slot（Support SATA）
Support 1*M.2 2242 B-key Slot (Support 4G function), embedded 1*SIM slot
Support 1*M.2 2230 E-key Slot（Support WIFI、Bluetooth Optional）
Optional expansion function：TPM Pin（Support TPM 1.2 / 2.0 security module），
1*COM ( (Standard version doesn’t have these function)
Network
2*10/100/1000M RTL8111H LAN
Network
1*M.2 2280 slot，Onboard 1*2.5” SATA HDD
Input Voltage
Support DC 12V Input
Other Function
Auto power on when there is electricity、Timing boot、Wake on LAN、PXE boot
Work Temp
0℃～+50℃（Commercial HDD），-20℃～+60℃（Industrial SSD），
Work Humidity
0% ～95% non-condensing
Dimension
144 * 126.5 * 42 mm
Application
0.8 kg
6
2. Application Planning
2.1 Transportation
Well packaged products can by any means of transport, to any place, in the long-distance transportation
shall not be installed in the open cabin and carriages, midway transshipment shall not be stored in
open-air warehouse, not allowed to be transported with inflammable, explosive, corrosive goods together.
And products are not allowed to get wet by rain, snow or liquid substances and mechanical damage.
2.2 Storage
The products should be stored in the original packaging box, the storage environment temperature of the
products is 0℃~ 40℃, the relative humidity is 20% ~ 85%. All kinds of harmful gases, inflammable and
explosive products and corrosive chemicals are not allowed in the warehouse, and there is no strong
mechanical vibration, impact and strong magnetic field effect. The packing case should be placed at least
10cm away from the ground and at least 50cm away from the wall, heat source, cold source, window or
air inlet.
Beware of the risk of damaging the equipment! Extreme temperature variations should be noted when
transporting products in cold weather. In this case, make sure no water droplets (condensation) form on
or inside the device. If condensation forms on the device, please wait at least 12 hours before connecting
the device.
2.3 Open and inspection of delivered equipment
Please note the following points when unpacking the equipment:
7
●It is recommended that you do not discard the original packaging materials. Please keep the original
packaging materials for use in the transportation of equipment again.
●Please store the document in a safe place, for initial debugging of the equipment need to use it.
●Inspect the delivered equipment to see whether there is any significant damage in transit.
● Verify that the shipment contains the complete equipment and accessories that you ordered separately.
If there is any discrepancy or exist shipping damage, please contact customer service.
2.4 Installation
□19 inch Rack Mount ■Desktop □Embedded ■VESA □Portable
3. Device Connection
3.1 Precautions before device connection
Warning
Connected or built-in peripherals shall not be connected to devices of opposite polarity.
8
Warning
This device can only be operated on the grounding power network. It is forbidden to operate on the
ungrounded or impedance grounded power network.
Warning
The rated voltage of the equipment used must conform to the power supply characteristics of the
product.
Attention
Connect the peripherals that are approved for industrial use. When the machine is running, it can be
connected to hot-plug I/O module (USB). I/O devices without hot-plug function can only be connected
after the power is disconnected.
3.2 Connect the device to the power supply
Steps of connect the device to the
power supply
Diagrammatic drawing
Connect DC 12V power adapter to
the power input port ①, then press
the front panel power switch button,
PC start with blue power LED on.
①
Warning
The on/off button signal will not cut off the PC power!
Warning
Long press the power switch for 4 seconds to turn off the pc, you need to turn off the power, then it can
be turned on normally.
9
4. Application specification
4.1 Product Photos
4.2 Product size drawing
10
4.3 I/O Port
Back Plate
NO
Port Name
1
Power Switch
2
4*USB3.0
3
2*USB2.0
4
1*COM
Inhaltsverzeichnis
Andere IWILL Desktop Handbücher
