J-Tech Digital JTECH-HDBT73 Bedienungsanleitung

Operating Instructions

Website: www.jtechdigital.com

Toll Free: 1-888-610-2818

Email: support@jtechdigital.com

USER MANUAL

J-Tech Digital® HDBaseT Extender 4K@60HZ 4:2:0

Model: JTECH-HDBT73

JTD-ID: 73

The HDBaseT Extender 4K@60HZ 4:2:0 Control Path has been tested for

conformity to safety regulations and requirements, and has been certified for

international use. However, like all electronic equipment, the JTECH-HDBT73

should be used with care. Please read and follow the safety instructions to protect

yourself from possible injury and to minimize the risk of damage to the unit.

Follow all instructions and warnings marked on this unit.

Do not attempt to service this unit yourself, except where explained in this

manual.

Provide proper ventilation, air circulation, and do not use near water.

Keep objects that might damage the device away and assure that the placement

of this unit is on a stable surface.

Use only the power adapter, power cords, and connection cables designed for

this unit.

Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power

to the device before cleaning.

SAFETY AND NOTICE

INTRODUCTION .......................................................................................................1

PACKAGE LIST.........................................................................................................1

FEATURES................................................................................................................1

PANEL DESCRIPTION .............................................................................................2

SYSTEM CONNECTION...........................................................................................3

SPECIFICATION .......................................................................................................4

PANEL DRAWING .................................................................................................... 5

TROUBLESHOOTING & MAINTENANCE................................................................6

TABLE OF CONTENTS

The JTECH-HDBT73 is an HDBaseT Extender set consist of transmitter (TX) and

receiver (RX). It distributes HDMI signal via CAT5e/CAT6a cable at 70m/PoC, and

enables IR and RS232 pass-through to control local source device from remote or

far-end display.

1x Transmitter (TX)

1x Receiver (RX)

2x TX Mounting Ears with 2 Screws

2x RX Mounting Ears with 2 Screws

4x TX Plastic Cushions

4x RX Plastic Cushions

1x IR Receiver

1x IR Emitter

2x 3-pin Phoenix Connector

1x Power Adaptor (12VDC, 1A)

1x User Manual

Note: Please contact your distributor immediately if any damage or defect in the

components is found.

Supports HDMI 1.4 & HDCP 2.2.

Maximum transmission distance is up to 40m for 4Kx2K, and 70m for 1080p.

Supports bi-directional 5V IR and RS232 pass-through for long-distance control.

Supports bi-directional PoC for simplified wiring.

Supports CEC.

Features DIP switcher for choosing Control or Update mode.

INTRODUCTION

PACKAGE LIST

FEATURES

No.

Name

Description

①

Power LED

Illuminates red when power is applied.

②

RS232

Euroblock/Phoenix connector for connecting an

RS232 data device.

③

HDMI IN (TX)

HDMI port for connecting the video source device

(e.g. Blu-ray DVD)

HDMI OUT (RX)

HDMI port for connecting the video display.

④

CTRL/UPDATE

Switch for determining the behavior of the RS232

connection.

When in the CTRL position, it serves as an RS232

serial extender.

When in the UPDATE position, it allows you to

update the Valens IC program by connecting to a

PC and running the batch file.

⑤

HDBT OUT (TX)

RJ45 jack for connecting the Cat5e/6 cable to the

Receiver.

HDBT IN (RX)

RJ45 jack for connecting the Cat5e/6 cable to the

Transmitter.

⑥

IR IN

3.5mm jack for connecting an IR Receiver (not

included).

⑦

IR OUT

3.5mm jack for connecting an IR Emitter (not

included).

⑧

DC 12V

DC barrel connector for connecting the included

AC power adaptor.

Tx Rx

LINKHDCP

12345678

Front Rear

PANEL DESCRIPTION

Usage Precautions

Make sure all components and accessories included before installation.

System should be installed in a clean environment with proper temperature and

humidity.

All of the power switches, plugs, sockets, and power cords should be insulated

and safe.

All devices should be connected before power on.

SYSTEM CONNECTION

Model

Spec

Transmitter (TX)

Receiver (RX)

Input

HDMI IN

HDBT IN

Output

HDBT OUT

HDMI OUT

Control

IR IN, IR OUT, RS232

General

Maximum Video

Resolution

4K×2K@60Hz 4:2:0, including 1080p@60Hz

Transmission Mode

HDBaseT

Transmission Distance

1080p signal to 70m, 4K signal to 40m

Bandwidth

10.2Gbps

Video Standard

HDMI 1.4 with HDCP 2.2

Power Consumption

10 watts

Operation Temperature

-10℃~ +55℃

Storage Temperature

-25℃~ +70℃

Relative Humility

10%-90%

Power Supply

Input Power: 12VDC 1A or Power over Cable (PoC)

AC Adaptor Input Power: 100~240VAC, 50/60Hz

Dimension (W*H*D)

106mm x 16mm x 84mm

Net Weight (g)

250g

SPECIFICATION

Transmitter (TX)

Receiver (RX)

PANEL DRAWING

No image on display:

Ensure that the display device has been set to the correct input.

Ensure that the HDMI cables used for both the source/transmitter and the

receiver/display are properly connected and are working. Test the HDMI cables

directly from a source to display and ensure their operation.

Ensure that the CAT5e/CAT6a cable has not been damaged and that it has

been terminated correctly with T568B on both ends. A temporary length of

CAT5e/Cat6 can be used for testing to ensure that the devices are all

compatible and working properly.

Ensure proper grounding of the power supply.

Known issues with HDMI 1.2 source devices:

Older compatibility (HDMI 1.2) may result in HDBaseT transmission issues.

Please contact Technical Support of your director for a solution to these issues.

Color lose or poor picture quality:

Ensure that the HDMI cables used for both the source and transmitter and the

receiver and display are properly connected and are of good quality. Test the

HDMI cables directly from a source to display and ensure their picture quality.

Ensure proper grounding of the power supply.

If the static becomes stronger or picture quality becomes worse when

connecting the video connectors, this may be due to improper grounding.

Check the grounding and make sure all the components are properly grounded

to a common ground. Improper grounding may cause damage to the receiver.

Note: If your problem persists after following the above troubleshooting steps, seek

further help from authorized dealer or our technical support.

TROUBLESHOOTING & MAINTENANCE

Inhaltsverzeichnis

Andere J-Tech Digital Extender Handbücher

J-Tech Digital

J-Tech Digital JTD-416 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-1651 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTECH-AET1000B Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-2860 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-183 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTECH-VW09 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-611V3 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTECH-AET1000 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-229 Bedienungsanleitung

J-Tech Digital

J-Tech Digital ARC-HDEX40ARC Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTECH-WEX-22 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTECH-EXBT460 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-190 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-3023 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-185 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-2865 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-2980 Bedienungsanleitung

J-Tech Digital

J-Tech Digital NA-EX01R Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTECH-BE100 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-2994 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTECH-ex2 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTECH-WEX20 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTECH-VW-4KPR Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-677 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung