J-Tech Digital JTD-611V3 Bedienungsanleitung

Dear Customer

Thank you for purchasing this product. For optimum performance and

safety, please read these instructions carefully before connecting,

operating or adjusting this product. Please keep this manual for future

reference.

J-Tech Digital products are designed to make your A/V device use more

convenient, comfortable and productive.

The J-Tech Digital JTECH-WEX200 wireless HDMI extender allows the

user to extend HD Audio & Video HDMI signals wirelessly up to 200

feet away to an HD capable display. The extender follows the TCP / IP

standard Wireless Transport Protocol, so it has high transmission rate

and strong anti-interference capability. The JTECH-WEX200 also

supports HDMI mirror output and infrared remote-control extension.

The JTECH-WEX200 is widely applicable to office presentations,

lectures, education, conferences, residential entertainment and more.

FEATURES:

One TX can be paired with up to two JTECH-WEX200 receivers

Transmitter features a local HDMI output port for local display

Supports HDMI resolutions: 480P - 1080P@50/60Hz and

SVGA - WUXGA

Utilizes the 5G ISM frequency band for high-transmission data rate

and anti-interference capabilities

Uses two external dual - gain antennas. Full HD 1080p transmits

up to 60 meters wirelessly in open space. (May be affected by the

use environment)

Extends wide-band infrared remote to control source device from

display side

Supports OSD for easy access to device status

Simple Plug and Play installation, no software required

Includes web configuration interface

PACKAGE CONTENTS:

1. HDMI Wireless Transmitter 1pc

2. HDMI Wireless Receiver 1pc

3. IR Transmitter cable 1pc

4. IR Receiver cable 1pc

5. User manual 1pc

6. DC power adapter 2pcs

7. Antenna 4pcs

POWER STATUS HDMI RESET

J-Tech Digital Wireless HDMI Extender

Up To 200ft with Adjustable Transmission Channels

MODEL:JTECH-WEX200

1080p

Full

Receiver

RESET CHANNEL

POWER STATUS HDMI

J-Tech Digital Wireless HDMI Extender

Up To 200ft with Adjustable Transmission Channels

MODEL:JTECH-WEX200

1080p

Full

Transmitter

FEATURES OF THE INTERFACE:

Transmitter (TX)

FIG.1 TX Front Panel View

FIG.2 TX Rear Panel View

POWER : Power indicator

STATUS: System status indicator

HDMI: HDMI input/output status indicator

RESET : Factory Reset Button

CHANNEL: Wireless channel switch button

DC12V : 12V DC in jack

IR OUT : Port for IR transmitter cable

HDMI IN: HDMI input port

HDMI OUT : HDMI loop output port

Receiver (RX)

FIG.3 RX Front Panel View

FIG.4 RX Rear Panel View

POWER: Power indicator

STATUS: System status indicator

HDMI: HDMI input/output status indicator

RESET : Factory Reset Button

DC12V : 12V DC in jack

IR IN: Port for IR receiver cable

HDMI OUT : HDMI output port

OPERATION AND CONNECTION:

1. Connect one HDMI cable from the HDMI source device (set top box,

DVD player, streaming device) into the HDMI input port of the HDMI

wireless TX.

2. Connect one HDMI cable from TV/Monitor into the HDMI output port

of the HDMI wireless RX.

3. Connect the IR Transmitter cable to the HDMI wireless TX’s IR Out

Port and the IR Transmitter cable must face the source device’s

infrared eye/sensor.

4. Connect IR Receiver cable to the HDMI wireless RX’s IR In Port.

5. Connect 12V power supplies to the TX & RX, the POWER indicator

will be illuminated when done successfully.

6. The extenders will automatically pair after being powered on. The

STATUS indicator of TX and RX will be illuminated when the

connection is successful. If the HDMI input or output signal is normal,

the HDMI indicator light will also be illuminated. The STATUS

indicator flashes continuously during normal transmission.

7. If you are using multiple receivers, all receivers will be connected

in the same way.

Local monitor

FIG.5 CONNECTION DIAGRAM

HDTV Monitor/Projector

RESET CHANNEL

POWER STATUS HDMI

J-Tech Digital Wireless HDMI Extender

Up To 200ft with Adjustable Transmission Channels

MODEL:JTECH-WEX200

1080p

Full

Transmitter

POWER STATUS HDMI RESET

J-Tech Digital Wireless HDMI Extender

Up To 200ft with Adjustable Transmission Channels

MODEL:JTECH-WEX200

1080p

Full

Receiver

Panel key operation instructions:

1. Changing Wireless Channel: Press the “CHANNEL” key on the

front panel of TX to cycle through multiple 5GHz wireless channels.

If the product works unsteadily or the picture is intermittent, please

try a different channel.

2. Restore Factory Setting: Press and hold the RESET button for

three seconds. The HDMI Status LED will flash three times and the

device will restart. The OSD will show that Restore Factory Set is

successful.

The Factory Reset Button is located at the bottom of the RESET hole

found on the transmitter and receiver. Perform factory reset while the

device is powered on. User will need to use a long and slim stick like a

paper clip to press the RESET button.

Note: You must reset transmitter and all receivers before they can be used again.

Web settings:

To prevent interference caused by a device using the same frequency, the

Wireless HDMI Extender supports the set-up and adjustment of the

operating channel and SSID via the WEB. For safety, the user should

change the SSID and the password during the first login. Please follow

the below steps:

1. Connect 12V power supplies to the transmitter and all receivers, and

let them finish the pairing sequence.

2. Enable WiFi on the mobile phone / PC, search for and connect to

SSID: JTD_HDMI_Wireless_1 Enter the default password: 00000000.

3. Modify the IP address type of the mobile phone / PC to Auto (DHCP).

When you select static type, you must be

set the IP in 192.168.1. xxx address

segment range, e.g. 192.168.1.100.

4. Open the browser and scan the QR

code or enter “192.168.1.10” in the

address bar to enterthe web GUI

as shown below:

5. Enter the default login password: admin, click “Login” to open the

settings interface. If you want to

modify the login password, please click on the " Modify " button. After

the password has been modified click "save" to save your changes and

exit. Restore factory settings by clicking the "reset" button.

6. If you have made an incorrect setting adjustment or forgot the set

password, you can restore factory settings on both transmitter and

receiver.

S P E C IF IC AT IO N S : J T E C H -W E X 200

HDMI resolution ................................................... up to 1080P@50/60Hz

HDMI Audio Format...............................................LPCM2.0/48KHz/16Bit

HDMI Max bandwidth...................................................................225MHz

HDMI Max baud rate..................................................................6.75Gbps

Input/Output TMDS signal.......................................0.5~1.5Volts p-p(TTL)

Input/Output DDC signal ................................................ 5Volts p-p (TTL)

HDMI output cable distance.............≤12m AWG26 HDMI standard cable

Antenna type.......................................... External dual 3dBi gain antenna

Wireless standard.............................................................IEEE 802.11a/n

Wireless Band..................................................................5GHz ISM Band

Max Data rates.........................................................2T2R up to 300Mbps

Transmit Output Power(IPEX)...................................................20dBm Max

Transmission distance....................................up to 200m (in open space)

IR Carrier frequency...................................................................20-60KHz

TX/RX Max working current ................................................................ 1A

Power adapter format Input.............AC 100V~240V 50HZ/60Hz, DC12A

Operating Temperature range..................................................-5 to +45℃

Storage Temperature range...................................................-20 to +60℃

Operating Humidity range ....................10 to 90%RH (No Condensation)

Storage Humidity range..........................5 to 95%RH (No Condensation)

Case Dimension (L x W x H).............................................5 x 5 x 0.98 (in)

Weight .................................................................TX .359 lbs / RX.352lbs

Before power on, please check all connecting cables carefully.

Please ensure that all cables are seated in their respective ports

correctly.

No.Problem

Description Solutions

1No display

1. Ensure the TV is on and is connected to the

extender via HDMI.

2. Please check the TX power supply

3. Make sure the TV is working regularly

Displays

“Connecting”

N o te s :

Please use the machine as instructed to preserve device longevity.

1. The machine should be placed in a location far from damp conditions,

high-temperatures and dust. Please also avoid erosive and oxidative

environments.

2. Avoid dropping, hitting or shaking the wireless extenders.

3. Touching the power adaptor with wet hands is prohibited.

4. Please hold the power adaptor head and do not pull the power cord

when removing from an electrical socket.

5. Please turn the power off when the machines are not used for a

prolonged period of time.

6. Please do not attempt to open or tamper with the internal components.

7. Please use the provided power adapter only.

FAQ :

1. Please check the RX power supply

2. Please ensure the WEB settings are set

correctly (if customized)

3. Co-channel interference. Please select a new

channel

4. Please power cycle both the transmitter and

receiver

Displays

“No signal”

Transmission

distance is

short

1. Check the signal source is powered on and

output is normal.

2. Check the signal source output resolution

(ensure it is supported)

3. Make sure the HDMI cable is properly

connected

1. Please adjust the angle of the antenna or

adjust the placement

2. Concrete walls, Brick, Wallpaper, Metal,

Bulletproof glass will shorten the signal cover

range or cause significant signal loss

3. Co-channel interference. Please select a new

channel

5Image is

not fluid

1. Please adjust the angle of the antenna or

adjust the placement

2. Co-channel interference. Please select a new

channel

6Can't find

the SSID

1. Please check the RX and TX power supply

2. Please check whether the Phone/PC supports

5G band

3. Factory default or turn off the power restart

Can't login to

the Web

settings

interface

1. Please check the RX and TX power supply

2. Please check the IP type of mobile phone/PC

is Auto (DHCP)

3. Please check the PC’s IP is in 192.168.1.

XXX address range

4. Please try logging in with a different web browser

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere J-Tech Digital Extender Handbücher

J-Tech Digital

J-Tech Digital JTD-229 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-3023 Bedienungsanleitung

J-Tech Digital

J-Tech Digital UHDT150 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-185 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTECH-VW09 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTECH-AET1000B Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTECH-VW-4KPR Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-2987 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-2980 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-1729 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTDHDEX-1 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTECH-WEX-22 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-190 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTECH-ex2 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-1263 Bedienungsanleitung

J-Tech Digital

J-Tech Digital ProAV Series Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTECH-4K88-EX2 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-1651 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTECH-HDBT73 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-2860 Bedienungsanleitung

J-Tech Digital

J-Tech Digital ARC-HDEX40ARC Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-DVI-EX-196 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-2865 Bedienungsanleitung

J-Tech Digital

J-Tech Digital JTD-183 Bedienungsanleitung

Beliebte Extender Handbücher anderer Marken

SY HDBT-60T Bedienungsanleitung

Appsys ProAudio

Appsys ProAudio ADX-16 Bedienungsanleitung

Atlona

Atlona RS232 Bedienungsanleitung

IDK

IDK OPF-TH1000-A Bedienungsanleitung

Enable-IT

Enable-IT 824WP Bedienungsanleitung

Worx

Worx Landroid RadioLink WA0864 Technisches Datenblatt

TP-Link

TP-Link TL-WA730RE Bedienungsanleitung

Camplex

Camplex CMX-HDMI-SFPL Bedienungsanleitung

SC&T

SC&T HE03-4K Bedienungsanleitung

Marmitek

Marmitek MegaView70 Bedienungsanleitung

Samsung

Samsung SCS-26UC4 Bedienungsanleitung

Foxun

Foxun SX-GES24 Bedienungsanleitung

MuxLab

MuxLab 500771 Bedienungsanleitung

foxunhd

foxunhd SX-AEX01 Bedienungsanleitung

TERK Technologies

TERK Technologies LFIRX2 Bedienungsanleitung

Devolo

Devolo Audio Extender Handbuch

Edimax

Edimax EW-7438RPn V2 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-6335T5 Bedienungsanleitung