Jablotron CA-2103 Athos Bedienungsanleitung

CA-2103 Athos

GSM / GPS car alarm

User

Manual

ProtectionControl Options

2/ FOREWORD

Dear User,

Thank you for purchasing the CA-2103 Athos

car alarm. It is a modern security device.

You can control it with the original car remote

controls, JABLOTRON remote controls, using

the voice menu, SMS commands or through

the user-friendly MyJABLOTRON application.

The car alarm protects the car body (generally the

doors, boot, bonnet), detects handling the ignition

key and it can be supplemented with an array

of wired and wireless detectors.

This makes the product suitable for a wide range

of applications from a common family car, through

to trucks, caravans and the protection of the car’s

surroundings such as e.g. a garage.

This manual will suggest how to control your

car alarm and what you can expect from it.

To get more information about the characteristics

of the car alarm and the exact scope of the

installation (detectors used), contact your installation

company or JABLOTRON support directly

on [email protected]

We wish you to always ﬁnd your car

in order whereever you have parked it.

Your JABLOTRON

Control

Using a remote control to control the car alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Control and administration through the MyJABLOTRON application . . . . . . . . . . . . . . . . . . . . . . . 5

SMS command control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Voice menu control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Protection

Alarm – attack on the car . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Acoustic and optical indication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Other functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Geofence, blocking, control of appliances, SINFO, GSM interference monitoring, vehicle voltage check

Options

Forwarding of unknown SMSes, roaming, driver’s logbook, credit balance, Locator . . . . . . . . . . . . . . . 13

Warranty terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2/ FOREWORD 3/ CONTENTS

The car alarm can be either controlled with the original car remote control,

or with a JABLOTRON remote control, or a combination of these methods.

Follow the respective paragraph that corresponds to the installation type in your car.

Setting – press the key on the remote control

to set the car alarm. If the car alarm is interconnected

with the central locking, the vehicle is locked

at the same time.

Partial setting – repeatedly press the

key (within 15 s of setting) to partially set the car

alarm. In this mode, some wired and wireless

detectors are not active. E.g. the car can be loaded

onto a train or ferry without triggering a tilt alarm,

or you can move inside a caravan. At the same time,

the sensor of vehicle voltage dips is not active.

Unsetting – use the key on the remote control to

unset the car alarm. If the car alarm is interconnected

with the central locking, the vehicle is unlocked

at the same time.

Setting – the car alarm is set together with locking

the vehicle.

Partial setting – repeatedly press the lock key

to partially set the car. In this mode, some wired

and wireless detectors are not active. E.g. the car

can be loaded onto a train or ferry without triggering

a tilt alarm, or you can move inside a caravan.

At the same time, the sensor of a vehicle voltage drop

is not active. Caution! This function is not available

in all vehicle types through the car remote control.

In such a case it can be replaced by phone control

(a smartphone app, ringing or SMS).

Unsetting – the car alarm is unset together

with unlocking the vehicle.

a) Using the original car remote control b) Using a JABLOTRON remote control

Using a remote control

4/ CONTROL

4/ CONTROL 5/ CONTROL

Control and administration

through the MyJABLOTRON

application

The MyJABLOTRON application represents a very

user-friendly and simple control method It is accessible

for all customers that are registered in MyJABLOTRON.

It is available both as a web and smartphone version.

After the login to the application the main menu

is opened, displaying the current status of the car

alarm and allowing you to control the system.

The MyJABLOTRON application also allows you

to display the position of the car on a map, the history

of events and to control optional appliances.

The application can also contain an easy-to-use

driver’s logbook with vehicle monitoring.

SMS control is available from pre-registered phone numbers.

If the user code and a space are inserted before the command,

the car alarm can be controlled from any phone.

The user code can consist of 4 to 10 characters

(A to Z and 0 to 9), the default setting is 1111

(change after installation).

To change the code, you must enter the original

code and the new code twice with a space.

An example of setting the new user code petr73 is:

1111 UC petr73 petr73

An example of the SMS command to check

the car alarm status:

– from a pre-registered phone number: STATUS

– from a non-registered phone number: 1111 STATUS

SMS control and administration

6/ CONTROL

7/ CONTROL

SMS command Alarm functions

AM Car alarm setting (with JABLOTRON remote control – car locking as well) 1)

AM EXT Partial setting (with JABLOTRON remote control – car locking as well) 1)

DM Car alarm unsetting (with JABLOTRON remote control – car unlocking as well) 1)

IMO Car blocking (permanent immobilization)

UNIMO Car unblocking

STATUS Requesting an SMS about the current status of the car alarm

GPS Requesting the last established GPS position

LOCATOR Requesting an SMS about the approximate position of the vehicle 1) 2)

HELP Requesting an SMS with help

SIREN Starting the siren for 30 sec.

CREDIT Checking the credit (with the use of a prepaid SIM card) 1)

GEOFENCE ON/OFF The unit sends / does not send SMSes to speciﬁed numbers about leaving and returning

to the preset zone. 1) 3)

Command SMS for car alarm control

In SMS messages, small and capital letters are not distinguished, diacritic (accented) marks are not allowed.

Request customized settings for the texts of command SMSes or texts of alarm messages from your service centre.

1) The function must be set by a service technician.

2) The service must be supported by the operator.

3) If you use the MyJABLOTRON application, set the Geofence function directly in the application.

Frequently crossing the zone edge inﬂuences the card’s operational costs.

8/ CONTROL

Voice menu control

The menu is accessible from the registered phone numbers that are saved

in the car alarm. It can also be allowed from phone numbers that are not saved

in the alarm, but before entering the menu the caller has to enter a password.

When the call is answered by the car alarm, the caller is informed

about the system status. Then, options to use it are offered.

Main Menu

Voice menu structure

More options

1 – Setting

2– Partial setting

3 – Unsetting

4– Blocking (see below)

5– Unblocking

0– More options

1– Sending an SMS with GPS coordinates

2– Sending a status SMS

3– Activation of the AUX A output

0– Back to Main Menu

8/ CONTROL 9/ PROTECTION

Alarm – attack on the car

In the case of a car attack - by activation of one of the inputs or detectors,

the car alarm triggers an alarm. It is indicated acoustically by the siren for 30 seconds

(optional). At the same time, the car alarm communicates via the GSM network.

The car alarm sends an SMS with the exact cause of the alarm to the registered

phone number and it also informs these users with a phone call.

The alarm can be stopped with a remote control

or SMS. During an ongoing alarm, control by the

voice menu or from the application may be restricted

due to outgoing communication.

A correct termination of an alarm is reported

to registered users by means of an SMS.

The number of alarms triggered by an individual

input is limited to a max. of three in one security

cycle in the case of an input fault.

The car alarm is able to communicate with an Alarm

Receiving Centre. In such a case the vehicle is under

supervision for 24 hours a day / 7 days a week thanks

to regular communication of the car alarm with the Alarm

Receiving Centre. In the case of an alarm (but also another

technological event, e.g. disconnection of the car battery),

it is not only the user that is informed, but also the Alarm

Receiving Centre, which organizes intervention immediately.

You will get more detailed information about Monitoring

by an Alarm Receiving Centre from our regional distributor

in your country.

Protection by an Alarm Centre

10 / PROTECTION

Acoustic and optical indication

The car alarm informs the user about changes to the status or system problems

(e.g. unavailability of the GSM network) acoustically by sounding the siren.

The acoustic signal conﬁrming unsetting and setting is optional.

Indication of partial setting and error indication cannot be disabled.

Sounding Description

1 sound setting the car alarm (optional)

2 continuous sounds partial setting

2 separated sounds unsetting (optional)

3 separated sounds unsetting after an alarm

4 separated sounds an active input on setting (optional)

6 continuous sounds unavailability of the GSM network

LED lamp Description

ﬂashes

more quickly

logging into the GSM network is occur-

ring or the GPS signal has been lost

ﬂashes indicating the set condition

ﬂashes slowly the unit indicates AUTOIMO

ﬂashes SOS (...---...) unit failure

lights permanently drive detection indication (if activated)

lights for 20 sec.

after setting the exit delay is occurring

off idle condition of the car alarm

Acoustic indication by the siren

The car alarm also indicates its status by the siren.

Optical indication by the LED

The car alarm indicates its status with an LED indicator.

Caution! If unavailability of the GSM network is indicated, the car alarm cannot communicate with the Alarm Receiving Centre

or with the registered users!

Andere Handbücher für CA-2103 Athos

Inhaltsverzeichnis

Andere jablotron Autoalarmanlage Handbücher

jablotron

jablotron CA-01 Pulse Leitfaden

jablotron

jablotron CA-320 Bedienungsanleitung

jablotron

jablotron CA-1802 athos Bedienungsanleitung

jablotron

jablotron CA-1803BT Athos Bedienungsanleitung

jablotron

jablotron CA-02 Fox Bedienungsanleitung

jablotron

jablotron CA-1802 athos Bedienungsanleitung

jablotron

jablotron CA-340 Bedienungsanleitung

jablotron

jablotron Athos CA-1202 Bedienungsanleitung

jablotron

jablotron CA-10 REX Bedienungsanleitung

jablotron

jablotron CA-1802 athos Bedienungsanleitung

jablotron

jablotron CA-1802 athos Bedienungsanleitung

jablotron

jablotron Accent CA-322 Bedienungs- und Wartungshandbuch

jablotron

jablotron Athos CA-1202 Bedienungsanleitung

jablotron

jablotron CA-1802 athos Bedienungsanleitung

jablotron

jablotron CL-306 Click Bedienungsanleitung

jablotron

jablotron Athos CA-1202 Bedienungsanleitung

jablotron

jablotron CA-1202 Athos Service-Handbuch

Beliebte Autoalarmanlage Handbücher anderer Marken

Clifford

Clifford 3606X Bedienungsanleitung

Ultra Start

Ultra Start 2500M SERIES Bedienungsanleitung

Ultra Start

Ultra Start 650 Series Bedienungsanleitung

Audiovox

Audiovox Prestige Platinum+ APS-511C Bedienungsanleitung

Sparkrite

Sparkrite SRA8 Bedienungsanleitung

Viper

Viper 4708V Bedienungsanleitung

Federal Signal Corporation

Federal Signal Corporation Pathfinder Siren Series Handbuch

Falcon

Falcon Predator XL3 Benutzerhandbuch

Audiovox

Audiovox Auto Security XR91 Betriebsanleitung

Clifford

Clifford Sabre II Bedienungsanleitung

CrimeStopper

CrimeStopper CS-8717 Kurzanleitung

Scytek electronic

Scytek electronic Vectra X3 Bedienungsanleitung

Clifford

Clifford CYBER 2 Bedienungsanleitung

Gemini

Gemini 7057 Bedienungsanleitung

FlashLogic

FlashLogic FLRSBA PRESTIGE Bedienungsanleitung

Magicar

Magicar FAI-440 Bedienungsanleitung

Clifford

Clifford Nova 3 Bedienungsanleitung

Viper

Viper 560XV Bedienungsanleitung

jablotron CA-2103 Athos Bedienungsanleitung

Beliebte Autoalarmanlage Handbücher anderer Marken