Jabra EHS30 Bedienungsanleitung

Jabra Headset Installation

Overview

EHS30 Included Contents

EHS30

3.5MM DC Jack

RJ12 Cord

RJ45 Cord

EHS30 Ports

RJ-12 Port for IP Phone EXT/EHS or Expansion Module

Operation LED

3.5mm DC Power Jack (not applicable to Jabra Headsets)

RJ-45 Jack

Headset Base and Phone Ports

Jabra 92X and 93X series Jabra 94XX series

Back of Sangoma S700 Phone

Jabra 92X and 93X Series Installation with EHS30

Putting 92X and 93X Headset in to DHSG Mode

Before beginning, make sure the headset is charged and paired with its base. Then:

Put on headset to hear audio prompts.

Press and hold both volume buttons at the same time until you hear “Setup," then release the buttons.

Press the talk button repeatedly until you hear “Remote Call Control."

Press the volume down button until you hear “DHSG."

Press the talk button to select.

Press and hold both volume buttons at the same time until you hear “Goodbye," then release the buttons.

The headset base will reset and update settings, indicated by the white battery icon on the base.

You need to make sure your Jabra headset is set up for the DHSG remote call control mode and not another mode such as IQ or auto-

detect. If your headset is not in DHSG mode, the headset may lose audio shortly after going off-hook (approximately 5-10 seconds).

Connecting the Cables

The following figure shows the connections between the EHS30 Adapter, the bottom of the Sangoma Phone, and the Jabra Wireless Headset

base unit. See the detailed instructions below.

Connect the included RJ45 Ethernet cable between the Aux Port of the Jabra Wireless Headset base unit and the RJ45 port (Port 4) of

the EHS30 Adapter.

Aux Port on 92X/93X Headset Base

RJ45 Port on EHS30

Connect the included RJ-12 cord between the EHS30 Adapter RJ12 Port (Port 1, next to the green LED light) and the EXT/EHS Port of

the Sangoma Phone.

RJ12 Port on EHS30

EXT/EHS Port on Sangoma S700 Phone

Connect the included RJ-9 cord from the telephone port on the Jabra Wireless Headset base unit to the headset port of the Sangoma

phone.

Telephone Port on Headset Base (labeled in )92X/93X blue

Headset Port on Sangoma S700 Phone

Connect the headset base station's power cable between the DC port on the base station and a power outlet.

DC Port on 92X/93X Headset Base

Jabra 94XX Series Installation with EHS30

Putting 94XX Headset in to DHSG Mode

On the Jabra headset base LCD GUI:

Click setting icon Phone settings Desk phone Setup desk phone confirm Manual Select DHSG Press ">" several times Press "x." Then

Jabra will auto restart.

Connecting the Cables

The following figure shows the connections between the EHS30 Adapter, the bottom of the Sangoma Phone, and the Jabra Wireless Headset

base unit. See the detailed instructions below.

Connect the included RJ45 Ethernet cable between the Aux Port of the Jabra Wireless Headset base unit and the RJ45 port (Port 4) of

the EHS30 Adapter.

Aux Port on 94XX Headset Base

You need to make sure your Jabra headset is set up for the DHSG remote call control mode and not another mode such as IQ or auto-

detect. If your headset is not in DHSG mode, the headset may lose audio shortly after going off-hook (approximately 5-10 seconds).

RJ45 Port on EHS30

Connect the included RJ-12 cord between the EHS30 Adapter RJ12 Port (Port 1, next to the green LED light) and the EXT/EHS Port of

the Sangoma Phone.

RJ12 Port on EHS30

EXT/HHS Port on Sangoma Phone

Connect the included RJ-9 cord from the telephone port on the Jabra Wireless Headset base unit to the headset port of the Sangoma

phone.

Telephone Port on 94XX Headset Base (labeled in here)blue

Headset Port on Sangoma Phone

Connect the headset base station's power cable between the DC in port and a power outlet.

DC Port on 94XX Headset Base

Inhaltsverzeichnis

Andere Jabra Adapter Handbücher

Jabra

Jabra A320s Bedienungsanleitung

Jabra

Jabra LINK 280 - Bedienungsanleitung

Jabra

Jabra Link 360 Bedienungsanleitung

Jabra

Jabra LINK 14201-17 - Bedienungsanleitung

Jabra

Jabra LINK 14201-20 - DATASHEET FOR TOSHIBA PHONES Bedienungsanleitung

Jabra

Jabra Link 360 Bedienungsanleitung

Jabra

Jabra A120s Bedienungsanleitung

Jabra

Jabra LINK 280 - Kurzanleitung

Jabra

Jabra GN 8110 USB-XP Bedienungsanleitung

Jabra

Jabra A210 Bedienungsanleitung

Jabra

Jabra LINK 14201-36 Installations- und Benutzerhandbuch

Jabra

Jabra GN 8110 USB-XP Bedienungsanleitung

Jabra

Jabra GN 8120 USB Beilage

Jabra

Jabra A210 Bedienungsanleitung

Jabra

Jabra GN L8464 Bedienungsanleitung

Jabra

Jabra A320s Bedienungsanleitung

Jabra

Jabra A125s Bedienungsanleitung

Jabra

Jabra Link 950 USB-C Bedienungsanleitung

Jabra

Jabra LINK 220 Bedienungsanleitung

Jabra

Jabra A125s Bedienungsanleitung

Jabra

Jabra HHC ADAPTER - DATASHEET CISCO Bedienungsanleitung

Jabra

Jabra A320s Bedienungsanleitung

Jabra

Jabra A210 Bedienungsanleitung

Jabra

Jabra A120s Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung