Jabra LINK 14201-20 - DATASHEET FOR TOSHIBA PHONES Sicherheitsleitfaden

Jabra Link 14201-20

How to connect my Jabra GN9330e with Avaya 1408, 1416,

1608, 1616, 9404, 9408, 9504, 9508, 9608, 9610, 9611G, 9620,

9620C, 9620L, 9621G, 9630, 9630G, 9640C, 9640G, 9641G,

9650, 9650C, 9670

Prerequisite:

Jabra GN9330e + Jabra LINK 14201-20

In combination with one of the following Avaya phones:

1408 / 1416

1608 / 1616

9404 / 9408

9504 / 9508

9608 / 9610 / 9611G / 9620 / 9620C / 9620L / 9621G

9630 / 9630G / 9640C / 9640G / 9641G / 9650 / 9650C / 9670

Connection:

1. Insert the supplied RJ9 to RJ9 connection cable into the socket of

your Jabra GN9350e base marked "phone" and the other end into the

socket of the EHS adapter marked with the "phone" symbol.

2. Now connect the end of the RJ12 to RJ12 connection cable (EHS

adapter) marked in red to the socket of the EHS adapter marked with

"AUX" and the socket of your Jabra GN9350e base marked with "AUX".

3. Now connect the RJ9 to RJ9 connection cable marked white "C" to the

socket of the EHS adapter marked with "Headset/Handset" and with

the "headset" socket of your phone.

Important: 1408/1416 and 9404/9408 phones, use the cable marked

18/11/2022 13:25

https://www.apac.jabra.com/supportpages/jabra-link-14201-20/14201-20/faq/4b5e7a92-

1178-46f7-9a07-1c396e2288bc

Page 1 of 3

with white "A" (instead of the "C" cable).

4. Connect the dial tone sensor to the EHS adapter and attach it to the

centre of the phone speaker.

Please note that full functionality is only available when all the colour-

marked parts of the cables are inserted into the EHS adapter. See photo.

Software setup:

Put the headset into the base and activate the "DHSG" mode.

Hold down the "phone" button on the base of the Jabra GN9330e for

approx. 6 seconds until the online display (blue LED) on the headset starts

to flash. The current software is displayed to you by activating the volume

controller in the form of the charge display (green LED).

LEDs from left to right:

LED 1 = RHL

LED 2 = DHSG

LED 3 = AEI

LED 4 = MSH

18/11/2022 13:25

https://www.apac.jabra.com/supportpages/jabra-link-14201-20/14201-20/faq/4b5e7a92-

1178-46f7-9a07-1c396e2288bc

Page 2 of 3

Now you can switch between the different software modes (LED 1-4) by

using the "volume" up/down controller on the headset. To confirm the

software has successfully installed, the base automatically switches back

to charge mode after approx. 15 seconds.

Base setup:

Set the phone set-up switch to "A".

Headset answer/end:

As soon as the dial tone signal can be heard in the headset, you can answer

the call by pressing the "answer/end" on the headset; by pressing again

the call is ended.

18/11/2022 13:25

https://www.apac.jabra.com/supportpages/jabra-link-14201-20/14201-20/faq/4b5e7a92-

1178-46f7-9a07-1c396e2288bc

Page 3 of 3

Andere Handbücher für LINK 14201-20 - DATASHEET FOR TOSHIBA PHONES

Inhaltsverzeichnis

Andere Jabra Adapter Handbücher

Jabra

Jabra A120s Bedienungsanleitung

Jabra

Jabra A125s Bedienungsanleitung

Jabra

Jabra Link 950 USB-C Bedienungsanleitung

Jabra

Jabra Link 380c MS Bedienungsanleitung

Jabra

Jabra A120s Bedienungsanleitung

Jabra

Jabra LINK 14201-36 Installations- und Benutzerhandbuch

Jabra

Jabra A320s Bedienungsanleitung

Jabra

Jabra Link 950 USB-A Bedienungsanleitung

Jabra

Jabra A210 Bedienungsanleitung

Jabra

Jabra LINK 260 Bedienungsanleitung

Jabra

Jabra A320s Bedienungsanleitung

Jabra

Jabra LINK 280 - Bedienungsanleitung

Jabra

Jabra GN9330e - USB - Headset Sicherheitsleitfaden

Jabra

Jabra GN 8120 USB Bedienungsanleitung

Jabra

Jabra EHS30 Bedienungsanleitung

Jabra

Jabra A320s Technisches Handbuch

Jabra

Jabra A210 Bedienungsanleitung

Jabra

Jabra Link 360 Bedienungsanleitung

Jabra

Jabra GN Ellipse 2.4 Bedienungsanleitung

Jabra

Jabra LINK 350 Bedienungsanleitung

Jabra

Jabra Link 360 Bedienungsanleitung

Jabra

Jabra LINK 220 Bedienungsanleitung

Jabra

Jabra GN 8120 USB Beilage

Jabra

Jabra LINK 220 Bedienungsanleitung

Beliebte Adapter Handbücher anderer Marken

PCB Piezotronics

PCB Piezotronics 090B274 Bedienungsanleitung

Gossen MetraWatt

Gossen MetraWatt AT3-III E Bedienungsanleitung

Akribis

Akribis ITF-21-BISS-MIT Bedienungsanleitung

Auvidea

Auvidea J20 Produkthandbuch

Tenda

Tenda W54U Bedienungsanleitung

ROHO

ROHO AGILITY Bedienungsanleitung

PROLiNK

PROLiNK WN2001 Bedienungsanleitung

Hawking

Hawking HUF2 Bedienungsanleitung

Airlink101

Airlink101 AWLC4030 Bedienungsanleitung

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Bedienungsanleitung

Philips

Philips SWA4554S/10 Bedienungsanleitung

JVC

JVC TS-C9D2B Gebrauchsanweisung

NETGEAR

NETGEAR A6100 Bedienungsanleitung

D-Link

D-Link DWA-121 Bedienungsanleitung

Philips

Philips SWA2037 Bedienungsanleitung

Basalte

Basalte 0610-20 Bedienungsanleitung

Yealink

Yealink EHS40 Bedienungsanleitung

RCA

RCA AH57R Bedienungsanleitung