JABSCO 5850-0001 Bedienungsanleitung

Model 5850-0001

SELF-PRIMING PUMP

FEATURES

Body: Bronze

Impeller: Jabsco Neoprene Compound

Shaft: 316 Stainless Steel

Shaft Seal: Lip Type

Ports: 3/4" NPT

Weight: 6 lb (approx.)

APPLICATION

Marine Engine Cooling

FOR ENGINE MODELS

CHRIS CRAFT - M Series (131 to 158 HP)

PALMER - DH 120

KERMATH - Sea Rover

LATHROP - LH Master-LH6-LH - Atom

OSCO - Hercules Diesel 685

UNIVERSAL - Super 6-Model Z

HERCULES - JX

(and others)

OPERATING INSTRUCTIONS

Pump will self-prime at low or high speeds. Make sure

scoop and inlet line are clear and all connections airtight.

Do not run pump dry for more than 30 seconds. Lack of

water flow may damage impeller. To drain pump, loosen

end cover screws.

SERVICE INSTRUCTIONS

IMPELLER REPLACEMENT: Remove end cover and

gasket. Pull impeller out by grasping hub or blades with

pliers. Replace impeller, gasket and end cover. A light

coating of grease in impeller bore will aid priming on dry

start up. (Use correct Jabsco gasket, a thicker or thinner

gasket may cause impeller damage.) Standard gasket is

0.010" thick.

INSTALLATION INSTRUCTIONS

Engage shaft with drive tang, make sure flange seats

squarely on mounting surface and bolt to engine.

Connect inlet and outlet fittings using pipe compound to

seal threads.

U.S.A.

Jabsco

1485 Dale Way, P.O. Box 2158

Costa Mesa, CA 92628-2158

Tel: 714.545.8251

Fax: 714.957.0609

UNITED KINGDOM

Jabsco

Bingley Road, Hoddesdon

Hertfordsire EN11 OBU

Tel: +44 (0) 1992 450145

Fax: +44 (0) 1992 467132

CANADA

Fluid Products Canada

55 Royal Road

Guelph, Ontario N1H 1T1

Tel: (519) 821.1900

Fax: (519) 821.2569

JAPAN

NHK Jabsco Company Ltd.

3-21-10, Shin-Yokohama

Kohoku-Ku, Yokohama, 222

Tel: 045.475.8906

Fax: 045.475.8908

GERMANY

Jabsco GmbH

Oststrasse 28

22840 Norderstedt

Tel: +49-40-53 43 73 -0

Fax: +49-40-53 53 73 -11

THE PRODUCT DESCRIBED HEREIN IS

SUBJECT TO THE JABSCO ONE YEAR LIMITED

WARRANTY, WHICH IS AVAILABLE FOR YOUR

INSPECTION UPON REQUEST.

MAJOR REPAIR: Remove pump from engine to replace

seal, bearings or shaft. To disassemble pump, remove

end cover, gasket and impeller as outlined above. Press

on impeller end of shaft to remove shaft and bearing

assembly. Remove cam and wearplate assembly. Use

screw driver to pry bearing seal out of bearing bore.

Press shaft seal out towards impeller bore. Replace all

worn parts. When installing coupling, support splined

end of shaft. Press bearing seal in bearing bore with lip

towards bearing. Press shaft and bearing assembly into

bearing bore. Press adaptor ring into body. Install slinger

on shaft. Install seal spacer in seal cavity. Install 0-ring in

seal bore. Press seal in seal cavity with lip facing toward

impeller bore. Apply a thin coat of sealant to top of cam

and cam screw threads, install wearplate and cam

assembly. (Be sure cam is flush with end cover surface.)

Secure with screw. Lubricate impeller bore, install

impeller. Lubricate impeller face, install gasket and end

cover and secure with screws.

EXPLODED VIEW

PARTS LIST

Part

Key Description Qty. Number

1Screw (End Cover) 6 91002-0020

2End Cover 1 11830-0000

3* Gasket 1 3298-0000

4* Impeller 1 1210-0001

6* Seal (Shaft) 1 92700-0060

7* O-Ring † 1 92000-0210

8Screw (Cam) 1 91003-0010

9Cam Wearplate 1 7884-0000

Assembly

10 Seal Spacer 1 3166-0000

11 Body 1

12 Adaptor Ring 1 3376-0000

13 Slinger 1 3286-0000

14 Shaft 1 5857-0000

15 Bearing Seal 1 92700-0060

16 Ball Bearing 2 92600-0130

17 Bearing Spacer 1 3383-0000

18 Coupling 1 3278-0000

Service Kit 90033-0001

*Parts Contained in Service Kit

†O-ring used only in pumps manufactured prior to June 1993.

Andere JABSCO Wasserpumpe Handbücher

JABSCO

JABSCO 18690-0000 Bedienungsanleitung

JABSCO

JABSCO 18490-0000 Bedienungsanleitung

JABSCO

JABSCO 1285O SERIES Bedienungsanleitung

JABSCO

JABSCO HD Series Bedienungsanleitung

JABSCO

JABSCO 18330 Series Bedienungsanleitung

JABSCO

JABSCO 30580 Series Bedienungsanleitung

JABSCO

JABSCO 30520-1001 Bedienungsanleitung

JABSCO

JABSCO 4720 Series Bedienungsanleitung

JABSCO

JABSCO 30560-0 Series Bedienungsanleitung

JABSCO

JABSCO 50870 Series Bedienungsanleitung

JABSCO

JABSCO 36600-0000 Bedienungsanleitung

JABSCO

JABSCO 5850-0001 Bedienungsanleitung

JABSCO

JABSCO 52520-1000 Bedienungsanleitung

JABSCO

JABSCO 28 Series Bedienungsanleitung

JABSCO

JABSCO 11860-0005 Bedienungsanleitung

JABSCO

JABSCO 30510-1003 Bedienungsanleitung

JABSCO

JABSCO 37202-2 Bedienungsanleitung

JABSCO

JABSCO VR050-2022 Bedienungsanleitung

JABSCO

JABSCO 37202-2 Bedienungsanleitung

JABSCO

JABSCO 30520-4 Series Bedienungsanleitung

JABSCO

JABSCO 30510-0 Series Bedienungsanleitung

JABSCO

JABSCO 31395-0092 Bedienungsanleitung

JABSCO

JABSCO 59520 Series Bedienungsanleitung

JABSCO

JABSCO 31295-0092 Bedienungsanleitung

Beliebte Wasserpumpe Handbücher anderer Marken

Neptun

Neptun NPHW 5500 Bedienungsanleitung

Sensidyne

Sensidyne Gilian BDX-II Montage- und Bedienungsanleitung

Draper

Draper 47808 Bedienungsanleitung

Trolla

Trolla 12820 Bedienungsanleitung

Sunfab

Sunfab SVH Series Bedienungsanleitung

WilTec

WilTec 50740 Bedienungsanleitung

Fieldmann

Fieldmann FVC 5015 EK Bedienungsanleitung

Everbilt

Everbilt EFSUB5-122HD Bedienungsanleitung

Graco

Graco Husky 3300e Bedienungsanleitung

esotec

esotec 101018 Bedienungsanleitung

moyno

moyno 2000 CC Bedienungsanleitung

Becker

Becker BASIC VASF 2.80/1-0.AC230 Bedienungsanleitung

Sykes AmeriPumps

Sykes AmeriPumps GP100M Fehlerbehebungshandbuch

DUROMAX

DUROMAX XP WX Series Bedienungsanleitung

BRINKMANN PUMPS

BRINKMANN PUMPS SBF550 Bedienungsanleitung

Franklin Electric

Franklin Electric IPS Bedienungsanleitung

Xylem

Xylem e-1532 Series Bedienungsanleitung

Milton Roy

Milton Roy PRIMEROYAL Bedienungsanleitung