JAI GO-5000M-PGE Bedienungsanleitung

Thank you for purchasing this product.

Be sure to read this documentation before use.

This documentation includes important safety precautions and instructions on how to operate the unit. Be sure to read this documentation to ensure

proper operation.

The contents of this documentation are subject to change without notice for the purpose of improvement.

User Manual

GO-5000M-PGE

GO-5000M-PGE-UV

CMOS Digital Progressive Scan

Monochrome and Monochrome UV Camera with GigE Interface

Document Version: 2.0

GO-5000M-PGE_Manual_Ver.2.0_2023-04-26

GO-5000M-PGE | GO-5000M-PGE-UV | User Manual (Ver. 2.0) Table of Contents

- 2 -

Table of Contents

Table of Contents 2

About Technical Note 5

Notice/Warranty 6

Notice 6

Warranty 6

Certifications 6

CE Compliance 6

FCC 6

Warning 7

KC 7

Supplement 8

Usage Precautions 9

Notes on Cable Configurations 9

Notes on LAN Cable Connection 9

Notes on Attaching the Lens 9

Phenomena Specific to CMOS Image Sensors 10

Notes on Exportation 10

Features 11

Feature Overview 11

Parts Identification 13

①Lens Mount (C-Mount) 13

②RJ-45 Connector 13

③POWER/TRIG LED 15

④LINKLED 15

⑤ACTLED 15

⑥DC IN/TRIG Connector (6-Pin Round) 16

⑦Mounting Holes (M3, 3mm depth) 16

Preparation 17

Step 1: Install the Software (First Time Only) 18

Step 2: Connect Devices 18

GO-5000M-PGE | GO-5000M-PGE-UV | User Manual (Ver. 2.0) Table of Contents

- 3 -

①Lens 19

②Direct Mounting (or Use MP-43 Tripod AdapterPlate) 19

③LAN Cable 20

➃Network Card 20

⑤DC IN / Trigger IN Connection Cable 20

⑥AC Adapter (Power Supply) (If Necessary) 20

Step 3: Verify Camera Operation 21

Step 4: Verify the Connection between the Camera and PC 21

Step 5: Change the Camera Settings 24

Step 6: Adjust the Image Quality 25

Adjust the Gain 26

Adjust the Black Level 27

Step 7: Save the Settings 27

To Save User Settings 28

To Load User Settings 29

Main Functions 30

Digital IN/OUT Interface 30

GPIO IN/OUT Matrix 33

Optical Interface 34

Characteristics of Optical Interface 35

Opt In Filter Selector Function 36

Pulse Generator 36

Sensor Layout 42

Camera Output Format 43

Pixel Format 44

Output Timing (Horizontal) 45

Output Timing (Vertical) 46

ROI (Region of Interest) Settings 48

Digital Output Bit Allocation 48

Acquisition Control 49

Acquisition Mode 50

Acquisition Start 53

GO-5000M-PGE | GO-5000M-PGE-UV | User Manual (Ver. 2.0) Table of Contents

- 4 -

Acquisition Stop 53

Acquisition Frame Rate 53

Calculation of the Maximum Frame Rate 54

Exposure Mode 56

Trigger Control 58

Normal Continuous Operation 61

Timed Mode 62

Trigger Width Mode 63

RCT (Reset Continuous Trigger) Mode 64

Video Send Mode 65

Sequence Mode 66

Trigger Sequence Mode Basic Timing 67

Sequence Index Table (Default) 68

Descriptions of Index Table Parameters 69

Multi ROI Mode 70

Operation and Function Matrix 71

Black Level Control 72

Gain Control 73

LUT (Lookup Table) 75

Gamma 76

Blemish Compensation 77

ALC (Automatic Level Control) 77

HDR (High Dynamic Range) 78

Non-Volatile Flash Memory 79

Miscellaneous 80

External Appearance and Dimensions 80

Spectral Response 81

Specifications 82

User's Record 85

Revision History 86

GO-5000M-PGE | GO-5000M-PGE-UV | User Manual (Ver. 2.0) Table of Contents

- 5 -

About Technical Note

Some additional technical information is provided on the JAI website as Technical Notes. In this

manual, if a technical note is available for a particular topic, the above icon is shown. Please refer to

the following URL for Technical notes.

https://www.jai.com/support-software/technical-notes

GO-5000M-PGE | GO-5000M-PGE-UV | User Manual (Ver. 2.0) Notice/Warranty

- 6 -

Notice/Warranty

Notice

The material contained in this manual consists of information that is proprietary to JAI Ltd., Japan, and

may only be used by the purchasers of the product. JAI Ltd., Japan makes no warranty for the use of

its product and assumes no responsibility for any errors which may appear or for damages resulting

from the use of the information contained herein. JAI Ltd., Japan reserves the right to make changes

without notice.

Company and product names mentioned in this manual are trademarks or registered trademarks of

their respective owners.

Warranty

For information about the warranty, please contact your factory representative.

Certifications

CE Compliance

As defined by the Directive 2004/108/EC of the European Parliament and of the Council, EMC

(Electromagnetic compatibility), JAI Ltd., Japan declares that GO-5000M-PGE and GO-5000M-PGE-

UV comply with the following provisions applying to their standards.

EN 61000-6-3 (Generic emission standard part 1)

EN 61000-6-2 (Generic immunity standard part 1)

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

lReorient or relocate the receiving antenna.

lIncrease the separation between the equipment and receiver.

GO-5000M-PGE | GO-5000M-PGE-UV | User Manual (Ver. 2.0) Notice/Warranty

- 7 -

lConnect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

lConsult the dealer or an experienced radio/TV technician for help.

Warning

Changes or modifications to this unit not expressly approved by the party responsible for FCC

compliance could void the user’s authority to operate the equipment.

제조년월은 제품상자의 라벨을 참조하십시오.

GO-5000M-PGE | GO-5000M-PGE-UV | User Manual (Ver. 2.0) Notice/Warranty

- 8 -

Supplement

The following statement is related to the regulation on “Measures for the Administration of the Control

of Pollution by Electronic Information Products “, known as “China RoHS“. The table shows contained

Hazardous Substances in this camera.

mark shows that the environment-friendly use period of contained Hazardous Substances is 15

years.

重要注意事项

有毒，有害物质或元素名称及含量表

根据中华人民共和国信息产业部『电子信息产品污染控制管理办法』，本产品《有毒，有害物质或

元素名称及含量表》如下．

部件名称

有毒有害物质或元素

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr (VI))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

电路板 × 〇〇〇〇〇

螺丝 × 〇〇〇〇〇

插座 × 〇〇〇〇〇

..... ..... ..... ..... ..... ..... .....

〇:表示该有毒有害物质在该部件所有均质材料中的含量均在GB/T 26572-2011规定的限量要求以下。

×:表示该有毒有害物质至少在该部件的某一均质材料中的含量超出GB/T 26572-2011规定的限量要求。

环保使用期限

电子信息产品中含有的有毒有害物质或元素在正常使用的条件下不会发生外泄或突变、

电子信息产品用户使用该电子信息产品不会对环境造成严重污染或对其人身、财产造成

严重损害的期限。

数字「15」为期限15年。

GO-5000M-PGE | GO-5000M-PGE-UV | User Manual (Ver. 2.0) Usage Precautions

- 9 -

Usage Precautions

Notes on Cable Configurations

The presence of lighting equipment and television receivers nearby may result in video noise. In such

cases, change the cable configurations or placement.

Notes on LAN Cable Connection

Secure the locking screws on the connector manually, and do not use

a driver. Do not secure the screws too tightly. Doing so may wear

down the screw threads on the camera. (Tightening torque: 0.147 Nm

or less)

Caution: Secure manually. Do not secure too tightly.

Notes on Attaching the Lens

How to Clean a Sensor

Avoiding Dust Particles

When attaching the lens to the camera, stray dust and other particles may adhere to the sensor

surface and rear surface of the lens. Be careful of the following when attaching the lens.

lWork in a clean environment.

lDo not remove the caps from the camera and lens until immediately before you attach the lens.

lTo prevent dust from adhering to surfaces, point the camera and lens downward and do not

allow the lens surface to come into contact with your hands or other objects.

lAlways use a blower brush to remove any dust that adheres.

lNever use your hands or cloth, blow with your mouth, or use other methods to remove dust.

GO-5000M-PGE | GO-5000M-PGE-UV | User Manual (Ver. 2.0) Usage Precautions

- 10 -

Phenomena Specific to CMOS Image Sensors

The following phenomena are known to occur on cameras equipped with CMOS image sensors.

These do not indicate malfunctions.

lAliasing: When shooting straight lines, stripes, and similar patterns, vertical aliasing (zigzag

distortion) may appear on the monitor.

lBlooming: When strong light enters the camera, some pixels on the CMOS image sensor may

receive much more light than they are designed to hold, causing the accumulated signal charge

to overflow into surrounding pixels. This “blooming” phenomenon can be seen in the image but

does not affect the operation of the camera.

lFixed pattern noise: When shooting dark objects in high-temperature conditions, fixed pattern

noise may occur throughout the entire video monitor screen.

lDefective pixels: Defective pixels (white and black pixels) of the CMOS image sensor are

minimized at the factory according to shipping standards. However, as this phenomenon can be

affected by the ambient temperature, camera settings (e.g., high sensitivity and long exposure),

and other factors, be sure to operate within the camera’s specified operating environment.

Notes on Exportation

When exporting this product, please follow the export regulations of your country or region.

Andere Handbücher für GO-5000M-PGE

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere JAI Bildverarbeitungssystem Handbücher

JAI

JAI GO-5000M-PGE-UV Bedienungsanleitung

JAI

JAI SW-4010Q-MCL-M52 Bedienungsanleitung

JAI

JAI GO-5000M-USB-UV Bedienungsanleitung

JAI

JAI GO-5000M-PGE-UV Bedienungsanleitung

JAI

JAI GO-5100MP-USB Bedienungsanleitung

JAI

JAI GO-5000M-PMCL-UV Bedienungsanleitung

JAI

JAI GO-5000M-PGE-1 Bedienungsanleitung

JAI

JAI GO-5000M-USB-UV Bedienungsanleitung

JAI

JAI BM-500 GE Bedienungsanleitung

JAI

JAI GO-2400M-PGE Bedienungsanleitung

Beliebte Bildverarbeitungssystem Handbücher anderer Marken

Festo

Festo SBOC-M-R1B-H Bedienungsanleitung

Banner

Banner VE200G1B Bedienungsanleitung

SVS-Vistek

SVS-Vistek CoaxPress EoSens Creation 1.1CXP2 Bedienungsanleitung

Sony

Sony Vision Exchange PEQ-C100 Bedienungsanleitung

Datalogic

Datalogic MX-U81 Montageanleitung

Cognex

Cognex In-Sight D900 Series Bedienungsanleitung

Spektrum

Spektrum SPMVR2520 Bedienungsanleitung

Huaray

Huaray Movidius Series Bedienungsanleitung

Daheng Imaging

Daheng Imaging MERCURY2 USB3 Bedienungsanleitung

SVS-Vistek

SVS-Vistek exo174 U3 Series Bedienungsanleitung

Teledyne

Teledyne e2v Eliixa+ Series Bedienungsanleitung

Photron

Photron FASTCAM Mini CX Series Bedienungsanleitung

National Instruments

National Instruments Vision CVS-1455 Bedienungsanleitung

Omron

Omron FH-L550 Bedienungsanleitung

iGen

iGen NV20/20 Bedienungsanleitung

Ark Vision Systems

Ark Vision Systems AVS-Monitor 7 FHD Bedienungsanleitung

Cognex

Cognex In-Sight 9902L Bedienungsanleitung

Feniex

Feniex C-5500 Bedienungsanleitung