JB Systems LIVE-6 Bedienungsanleitung

Other languages can be downloaded from:

WWW.JB-SYSTEMS.EU

ENGLISH

Operation Manual

Version: 1.0

LIVE-6 / LIVE-10

ENGLISH USER MANUAL

JB SYSTEMS 1/7 LIVE-6 / LIVE-10

OPERATION MANUAL

Thank you for buying this JB Systems®product. To take full advantage of all possibilities, please read these

operating instructions very carefully.

FEATURES

•Versatile PA mixer in a handy compact format.

•Powered by a 5V USB connector.

•Combine it with a power bank and battery powered speakers to be 100% mobile 😊

•LIVE-10: 10 inputs over 8 channels (6 mic/line, 1 mono/stereo line, 1 mono/stereo line /USB/player)

LIVE-6: 6 inputs over 4 channels (2 mic/line, 1 mono/stereo line, 1 mono/stereo line /USB/player)

•The USB connector on the top panel is Bidirectional (for mono recording or stereo playback via PC/Mac).

•Internal WMA, WAV, FLAC, APE and MP3 media player for USB memory sticks

•The media player can also be used as a mono mp3 recorder (128kbps)

•Integrated Bluetooth receiver

•Internal 32bit DSP-effect unit with 99 effect variations

•Input control on all the MONO channels:

•Individual 48V Phantom Power switch on each mono channel !

•-20dB PAD switch

•Gain

•Pan

•Low Cut filter switch

•Treble, semi-parametric mid, bass

•Effect send

•Channel level fader

•Balanced Master output.

•Headphones + control room output with level control

BEFORE USE

•Before you start using this unit, please check if there’s no transportation damage. Should there be any, do

not use the device and consult your dealer first.

•Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary for

the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused by

mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects or

problems caused by disregarding this user manual.

•Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user manual.

•To protect the environment, please try to recycle the packing material as much as possible.

Check the contents:

Check that the carton contains the following items:

•Mixer

•USBA-USBA cable + power adapter

•Operating instructions

SAFETY INSTRUCTIONS:

CAUTION

CAUTION: To reduce the risk of electric shock, do not

remove the top cover. No user-serviceable parts inside.

Refer servicing to qualified service personnel only.

The lightning flash with arrowhead symbol within the equilateral triangle is intended to alert the

use or the presence of un-insulated “dangerous voltage” within the product’s enclosure that may

be of sufficient magnitude to constitute a risk of electric shock.

ENGLISH USER MANUAL

JB SYSTEMS 2/7 LIVE-6 / LIVE-10

•To prevent fire or shock hazard, do not expose this appliance to rain or moisture.

•To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when

bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full

performance or may even cause damages.

•This unit is for indoor use only.

•Don’t place metal objects or spill liquid inside the unit. No objects filled with liquids, such as vases, shall be

placed on this appliance. Electric shock or malfunction may result. If a foreign object enters the unit,

immediately disconnect the mains power.

•No naked flame sources, such as lighted candles, should be placed on the appliance.

•Don’t cover any ventilation openings as this may result in overheating.

•Prevent use in dusty environments and clean the unit regularly.

•Keep the unit away from children.

•Inexperienced persons should not operate this device.

•Maximum safe ambient temperature is 40°C. Don’t use this unit at higher ambient temperatures.

•Minimum distances around the apparatus for sufficient ventilation is 5cm.

•Always unplug the unit when it is not used for a longer time or before you start servicing.

•The electrical installation should be carried out by qualified personal only, according to the regulations for

electrical and mechanical safety in your country.

•Check that the available voltage is not higher than the one stated on the rear panel of the unit.

•The socket inlet shall remain operable for disconnection from the mains.

•The power cord should always be in perfect condition. Switch the unit immediately off when the power cord

is squashed or damaged. It must be replaced by the manufacturer, its service agent or similarly qualified

persons in order to avoid a hazard.

•Never let the power-cord come into contact with other cables!

•When the power switch is in OFF position, this unit is not completely disconnected from the mains!

•In order to prevent electric shock, do not open the cover. Apart from the mains fuse there are no user

serviceable parts inside.

•Never repair a fuse or bypass the fuse holder. Always replace a damaged fuse with a fuse of the same type

and electrical specifications !

•In the event of serious operating problems, stop using the appliance and contact your dealer immediately.

•Please use the original packing when the device is to be transported.

•Due to safety reasons it is prohibited to make unauthorized modifications to the unit.

INSTALLATION GUIDELINES:

•Install the unit in a well-ventilated location where it will not be exposed to high temperatures or humidity.

•Placing and using the unit for long periods near heat-generating sources such as amplifiers, spotlights, etc.

will affect its performance and may even damage the unit.

•When installed in a booth or flight case, please make sure to have good ventilation to improve heat

evacuation of the unit.

•To avoid condensation to be formed inside, allow the unit to adapt to the surrounding temperatures when

bringing it into a warm room after transport. Condense sometimes prevents the unit from working at full

performance.

The exclamation point within the equilateral triangle is intended to alert the user to the presence

of important operation and maintenance (servicing) instructions in the literature accompanying

this appliance.

This symbol means: indoor use only

This symbol means: Read instructions

This symbol means: Safety Class III appliance

ENGLISH USER MANUAL

JB SYSTEMS 3/7 LIVE-6 / LIVE-10

ENGLISH USER MANUAL

JB SYSTEMS 4/7 LIVE-6 / LIVE-10

CONNECTORS, CONTROLS AND FUNCTIONS

1. [MIC] input: Balanced microphone input

2. [LINE] inputs: Mono Line input via a Jack connector

3. [PAD] switch: can be used to attenuate the input signal with 20dB

4. [PEAK] LED indicator: This LED indicator shows the level of the signal input of the channel. The peak

indicator lights up when the input signal reaches 5dB below the channel’s clipping point. This indicator

shows the level of the Post-EQ/ pre-fader signal. If the PEAK indicator lights more than briefly on high-

level transients, you should use the red GAIN control knob to decrease the input sensitivity of the channel.

If this does not work, reduce the output level of the connected source.

5. [GAIN] control knob: According to the level of the input signal, use this knob to adjust the input signal to

an appropriate level. The best balance of S/N and dynamic range will be achieved if you adjust the GAIN

control so that the peak indicator lights occasionally..

6. [HIGH]: This knob adjusts the channel’s high frequency band. Setting the knob to the “0” position produces

a flat frequency response .Turning the knob to the right boosts the corresponding frequency band ,while

turning to the left cuts the band.

7. [MID]: This knob adjusts the level of the channel’s medium frequency band. The exact medium frequency

band you want to adjust can be selected with the [FREQ] frequency knob (8). Setting the knob to the “0”

position produces a flat frequency response .Turning the knob to the right boosts the corresponding

frequency band ,while turning to the left cuts the band.

8. [FREQ]: with this knob you can select the exact mid frequency you went to adjust. Once this is done, you

can adjust its level with the MID knob (7)

ENGLISH USER MANUAL

JB SYSTEMS 5/7 LIVE-6 / LIVE-10

9. [LOW]: This knob adjusts the channel’s low frequency band. Setting the knob to the “0” position produces

a flat frequency response .Turning the knob to the right boosts the corresponding frequency band ,while

turning to the left cuts the band.

10. [FX SEND] knob: This knob controls the level of your channel signal that is sent to the internal effect

module and/or to the SEND output (28).

11. 48V PHANTOM Power switch: This switch toggles the phantom power on or off.

Set this switch on when using one or more condenser microphones that need to receive external power from the

mixer. When this switch is on, the mixer supplies DC +48V power to pins 2 and 3 of all XLR-type MIC INPUTS.

•Be sure to leave this switch off if you do not need phantom power

•When turning the switch on , be sure that only condenser MICs are connected to the XLR input

WARNING: Devices other than condenser MICs may be damaged if connected to the phantom power supply.

However, the switch may be left on without problem when connecting balanced dynamic microphones.

To avoid damage to speakers, be sure to turn off the amplifiers (or powered speakers) before turning this switch on

or off. We also recommend that you turn all out controls (MAIN master fader, AUX send, etc.) to minimum settings

before operating the switch, to avoid risk of loud noises that could cause hearing loss or device damage.

12. [PAN] knob: This control pans the channel signal across the master L and R busses, thus determining

the perceived position of the sound from that channel in the output stereo sound field. If a PAN control is

set all the way to the left, for example, the sound from that channel will be heard from the left speaker

system only. If it is set all the way to the right, the sound will be heard from the right speaker system only.

Intermediate settings will cause the sound to appear at corresponding locations in the stereo sound field

13. Channel Fader (or knob): This is the channel’s main level control. It determines the level of the signal

that is sent from the channel to the master mixing and post fader effect busses (AUX and internal effect

module). It is the settings of the input channel faders that determine the mix, or the balance of sound levels

between the instruments or other sources connected to the inputs. When a channel is not being used, its

fader should be set at the minimum position to prevent the addition of unwanted noise to the main program

signal

14. [LOW CUT] filter button: this button can be used to cut frequencies below 80Hz. This can be useful to

decrease popping of microphones or to avoid low feedback from acoustic instruments. If you use

subwoofers, activating this filter removes the input source from the subwoofers. It helps to create a cleaner

mix.

15. [MAIN] fader: Adjusts the final output level of the MAIN outputs

16. L & R level meters: shows the level of the MAIN output

17. [POWER] Led: is lit when the power is switched on

18. [CH./. or USB] switch: with this switch you can select the audio source for channels 5/6 (on the LIVE-6)

or for channels 9/10 (on the LIVE-10)

•= sound coming from the Jack inputs (28)

•= sound coming from the USB Stick (internal player) / computer / Bluetooth

19. [FX LEVEL] knob: Adjust the level of the signal sent from the internal digital effect to the MAIN outputs.

20. [DSP PROGRAM] button: turn the knob to choose one of the build-in effects. Once the number of the

desired effect appears on the display, you have to press the knob to activate the effect

00-10 HALL 01

46-55 DELAY

81-85 TREMOLO

11-20 HALL 02

56-65 REVERB + ECHO

86-90 WAHWAH

21-30 ROOM 01

66-70 CHORUS

91-95 CHORUS + DELAY

31-40 ROOM 02

71-75 FLANGER

96-97 FLANGER + DELAY

41-45 SHORT DELAY

76-80 PHASER

98-99 WAHWAH + DELAY

21. Internal player: by pressing the [MODE] button shortly you can scroll through the different working modes:

•[NO]: when you are in the internal player mode and no USB stick is connected to the unit, the display will

show [NO]

•[USB]: when an USB stick is connected to the unit, the display will show [USB] shortly. The music on the

stick will start playing automatically. The 3 other buttons of the internal player are now active:

oPlay/Pause/REC button: can be used to start or pause the playback of a song

oBack/- button:

▪press it shortly to go to the previous song on the USB device.

▪press it longer to decrease the playback volume

oForward/+ button:

▪press it shortly to go to the next song on the USB device.

▪press it longer to increase the playback volume (max = 30)

oLoop mode: it is possible to select a loop for 1 song or for ALL songs. Press the [MODE] button for

a while and one of these options will appear. To go to the other option, press the [MODE] button

again for a longer period (no short pressing)

▪[ONE]: only one song will be played in a loop.

ENGLISH USER MANUAL

JB SYSTEMS 6/7 LIVE-6 / LIVE-10

▪[ALL]: all the songs on the USB device will be played over and over again

•[bt]: Bluetooth is active and ready to receive music from your smartphone, tablet or other Bluetooth device.

If your device has already been connected to the mixer before, the connection will be made automatically.

oPlay/Pause/REC button: can be used to start or pause the playback of a song

oBack/- button:

▪press it shortly to go to the previous song on the Bluetooth device.

▪press it longer to decrease the playback volume

oForward/+ button:

▪press it shortly to go to the next song on the Bluetooth device.

▪press it longer to increase the playback volume (max = 30)

•[rEC]: when an USB stick is connected to the unit, you can now record the sound of your MAIN output to

your USB stick in MP3 format (125kbps). The recording level is influenced by the level of the MAIN output

(faders). Press the REC button for a couple of seconds to start recording.

•[PC]: your computer is connected to the mixer. All the audio from your computer will now be sent to themixer

(from audio files, video files, etc.).

IMPORTANT: When you connect the mixer for the first time to your computer, please wait until the automatic

installation is finished.

oPlay/Pause/REC button: can be used to start or pause the playback of the music source on your

computer (audio file, video file, etc.)

oBack/- button:

▪press it shortly to go to the previous file when a playlist is selected in your computer (audio

or video)

▪press it longer to decrease the playback volume of your computer

oForward/+ button:

▪press it shortly to go to the previous file when a playlist is selected in your computer (audio

or video).

▪press it longer to increase the playback volume of your computer

IMPORTANT REMARK: we strongly advise you to don’t lower the playback volume with the [BACK/-] button if it is not

really necessary, especially when you are playing music from an USB device. If you put it on “zero” and forget you did this

(or another user works with the mixer) there will be no sound available when you try to play a song of the USB device or

Bluetooth device ! 😊

22. [STEREO IN] connector: this minijack can be used to connect a tablet or phone via wire.

Important: don’t use this input (22) when a signal is already sent via the jack inputs (27) because both

signals would be routed to the same channel

23. [POWER] SWITCH: Used to turn the power of the mixer on and off. The red POWER led (17) on the front

of the unit is lit when the mixer is switched on.

24. USB connector: can be used for different purposes

•Insert an USB stick: for the recording of the main mix (mp3) or for the playback of WMA, WAV, FLAC, APE

and MP3 files

•Use a USB-A / USB-A cable to connect a computer. This port is bidirectional, so you can playback music

from your computer or use the computer to record the main mix output

•Can eventually also be used to power the unit

25. [CONTROL ROOM]: The output level can be controlled via the PHONES/CONTROL ROOM knob (31)

26. [MAIN]: Use the balanced XLR-connectors to connect this mixer to any amplifier or active speakers.

27. [LINE] inputs: Stereo Line input via Jack connectors. Connect your source to the LEFT input connector

If you want to use this channel as a mono Line input.

28. [LINE] inputs: Stereo Line input via Jack connectors. Connect your source to the LEFT input connector

If you want to use this channel as a mono Line input.

Important: don’t use these inputs (27) when a signal is already sent via the stereo mini-jack input (22)

because both signals would be routed to the same channel

ENGLISH USER MANUAL

JB SYSTEMS 7/7 LIVE-6 / LIVE-10

29. [SEND]:. The amount of signal of each individual input channel that should be routed to this output can be

set by using the orange FX/SEND buttons (10). As the signal is post fader, the level is also influenced by

the channel fader/knob

30. [PHONES] output: connect your headphones here

31. [PHONES/CTRL ROOM] knob: adjusts the output level of the headphones output and the control room

output.

32. USB [POWER] connector: this input can ONLY be used to power the unit via an USB power adapter of

DC 5V of 1A or more.

Note: the unit can also be powered via the USB connector on the front of the unit (24). When the unit is

already powered, for example by via a computer, this power input should not be used.

CLEANING THE MIXER:

Clean by wiping with a polished cloth slightly dipped with water. Avoid getting water inside the unit. Do not use

volatile liquids such as benzene or thinner which will damage the unit.

SPECIFICATIONS

This unit is radio-interference suppressed. This appliance meets the requirements of the current European and

national guidelines. Conformity has been established and the relevant statements and documents have been

deposited by the manufacturer.

Power Supply: DC 5V-1A

Power Consumption: Live-6 = 5W, Live-10 = 9W

Frequency response: 20-20.000Hz (±1dB+4dBμ@1KHz)

THD: <0.5%

USB connections: USB 2.0

Media Player Formats: WMA, WAV, FLAC, APE, MP3

Channel tone controls:

High: +15dB / -15dB @ 12kHz

Mid: +15dB / -15dB @ 2.5kHz

(Freq adjustment from 250Hz to 5kHz)

Low: +15dB / -15dB @ 80Hz

Dimensions: Live-6 = 250(W) x 275(D) x 60(H) mm

Live-10 = 415(W) x 275(D) x 60(H) mm

Weight: Live-6= 1,8kg, Live-10= 3kg

The information is subject to change without prior notice

You can download the latest version of this user manual on our website: www.jb-systems.eu

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere JB Systems DJ-Equipment Handbücher

JB Systems

JB Systems CD 100 Bedienungsanleitung

JB Systems

JB Systems beat 6 mk2 Bedienungsanleitung

JB Systems

JB Systems LED Rotogobo Bedienungsanleitung

JB Systems

JB Systems COB-4BAR Bedienungsanleitung

JB Systems

JB Systems RAVE BAR Bedienungsanleitung

JB Systems

JB Systems PARTY BEAMS Bedienungsanleitung

JB Systems

JB Systems Sunbar Combi Bedienungsanleitung

JB Systems

JB Systems Liverack-10 Bedienungsanleitung

JB Systems

JB Systems UV-400 Bedienungsanleitung

JB Systems

JB Systems MULTIBEAM LASER Bedienungsanleitung

JB Systems

JB Systems USB DERBY Bedienungsanleitung

JB Systems

JB Systems MIX6 USB Bedienungsanleitung

JB Systems

JB Systems STRIKER Bedienungsanleitung

JB Systems

JB Systems CLUB7USB Bedienungsanleitung

JB Systems

JB Systems Led Globe Bedienungsanleitung

JB Systems

JB Systems YETI Installationshandbuch

JB Systems

JB Systems Sunbar White Bedienungsanleitung

JB Systems

JB Systems CHALLENGER BSW Bedienungsanleitung

JB Systems

JB Systems USB PAR Bedienungsanleitung

JB Systems

JB Systems USB MUSHROOM Bedienungsanleitung

JB Systems

JB Systems CLUBSPOT Installationshandbuch

JB Systems

JB Systems enh2.3 Mk2 Bedienungsanleitung

JB Systems

JB Systems BL-B18 Bedienungsanleitung

JB Systems

JB Systems MCD 200 Bedienungsanleitung

Beliebte DJ-Equipment Handbücher anderer Marken

ALPHA LITE

ALPHA LITE ALPHA 1500 Betriebsanleitung

Chauvet

Chauvet OVATION E-930VW Bedienungsanleitung

Zumtobel

Zumtobel APHRODITE Home Bedienungsanleitung

Snow Masters

Snow Masters Zig Oscillator Bedienungsanleitung

EuroLite

EuroLite 50530554 Bedienungsanleitung

Beamz

Beamz BUV243 Bedienungsanleitung

thomann

thomann Stairville DJ Lase 40-G MK-III Bedienungsanleitung

Eagletone

Eagletone 6 Eyes Flower Bedienungsanleitung

EuroLite

EuroLite FLD-1508 Bedienungsanleitung

Technical Pro

Technical Pro LG8xSEA Bedienungsanleitung

Lightmaxx

Lightmaxx Vega Halo 90 Bedienungsanleitung

Elation

Elation FUZE WASH Z350 Bedienungsanleitung

Maverick

Maverick MK3 WASH Bedienungsanleitung

Infinity

Infinity TF-260C7 Fresnel Bedienungsanleitung

Chauvet

Chauvet EVE E-50Z Bedienungsanleitung

Eliminator Lighting

Eliminator Lighting E 138 Bedienungsanleitung

EuroLite

EuroLite Mini Multicolor LED Flashing Light SC Bedienungsanleitung

KAM

KAM DMX Laser80 FScan Bedienungsanleitung