jbc SF250 Bedienungsanleitung
Auto-Feed Iron
Replacement
INSTRUCTION MANUAL
2
Auto-Feed Iron .......................................................................................................................................... 1 unit
(Cartridge not included)
Allen Key 2,5mm ................................ 1 unit
Ref. 0780493
Manual .................................................. 1 unit
Ref. 0027533
Packing List
The following items are included:
This manual corresponds to the following reference:
0027332 for SF Automatic Solder Feeder Station
Stand Cable*
Ref. 0024227
3
Features and Connections
The Solder Feed Iron is connectable to the Solder Feeder SF and a Soldering Station at the
same time, be it a Modular Station or a Compact Station.
Stand*
Ref. SF250-SE
Auto-Feed Iron
Ref. 0027332
SF
Automatic Solder Feeder
Station*
Control Unit*
*not included
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
4
1. Loosen the cartridge screw to release it. Place the new cartridge into the Auto-Feed Iron.
Mark
Changing Cartridges
For a safe cartridge change, unplug the tool or turn the station off before following these guidelines:
2. Align the tip of the cartridge with the solder guide tube.
Important: It is essential to insert the cartridge till the end for a good connection. Use the mark as
reference. Tighten the cartridge screw.
3. You must leave a gap of 8-10 mm (0.31 - 0.40 in) between the tip and the end of the guide tube.
4. Loosen the guide screw. Adjust the guide tube and tighten the screw.
8-10 mm
(0.31 - 0.40 in)
1
2
4
3
5
The Auto-Feed Iron works with C250 cartridges. Find the model that best suits your soldering needs at
www.jbctools.com
Compatible Cartridges
C250404
1.2 x 0.7
(0.047 x 0.028)
C250405
1.8 x 0.8
(0.071 x 0.032)
C250406
2.2 x 1
(0.087 x 0.039)
C250412
4.8 x 1.5
(0.189 x 0.059)
C250418
3.2 x 1.5
(0.126 x 0.059)
C250420
Ø 0.4
(Ø 0.016)
C250401
Ø 0.6
(Ø 0.024)
C250402
Ø 0.8
(Ø 0.031)
C250403
Ø 1
(Ø 0.039)
C250409
Ø 1.7
(Ø 0.067)
C250410
Ø 2.2
(Ø 0.087)
C250407
1.2 x 0.7
(0.047 x 0.028)
C250408
2.2 x 1
(0.087 x 0.039)
C250411
4.8 x 1.5
(0.189 x 0.059)
C250413
2.2 x 1
(0.087 x 0.039)
C250414
Ø 2.2
(Ø 0.087)
C250415
Ø 3.8
(Ø 0.149)
Ø mm
( Ø in )
dimensions
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
6
Accessories
Fume Extractor
Ref. F4468 - 2 m (78.74 ft) lenght.
The fume extractor for the Auto-Feed Iron is an easy & safe solution to suck the fume generated at the
solder joint.
Handsfree Stand
Ref. AL-IA
Indispensable for using the Auto-Feed Iron while having both hands free. Suitabel for Auto-Feed Iron
Ref. AL250-B and Ref. 0027332.
7
Before carrying out maintenance, always allow the equipment to cool.
- Before carrying out maintenance, always unplug the stand and the tool.
- Check periodically that the metal parts of the tool and the stand are clean to ensure detection of
the tool when it is in the stand. Use a damp cloth or alcohol.
- Periodically check all cables and tubes connections.
- Replace any defective or damaged pieces. Use original JBC spare parts only. Repairs should only
be performed by a JBC authorized technical service.
Maintenance
Safety
- Do not use the stands for any purpose other than soldering or rework.
- The power cord must be plugged into approved bases. Be sure that it is properly grounded
before use. When unplugging it, hold the plug, not the wire.
- The tool should be placed in the stand when is not in use in order to activate the sleep mode.
The soldering tip, the metal part of the tool and the stand may still be hot even when the station
is turned off. Handle with care, including when adjusting the stand position.
- Avoid the contact of flux with skin or eyes to prevent irritation.
- Be careful with the fumes produced while soldering.
- Keep your workplace clean and tidy. Wear appropriate protection glasses and gloves while
working to avoid personal harm.
- Utmost care must be taken with liquid tin waste which can cause burns.
- Maintenance must not be carried out by children unless supervised.
It is imperative to follow safety guidelines to prevent electric
shock, injury, fire or explosion.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
This product should not be thrown in the garbage.
In accordance with the European directive 2012/19/EU, electronic equipment at the end of its life must
be collected and returned to an authorized recycling facility.
Warranty
JBC’s 2 year warranty covers this equipment against
all manufacturing defects, including the replacement
of defective parts and labour.
Warranty does not cover product wear or misuse.
In order for the warranty to be valid, equipment must
be returned, postage paid, to the dealer where it was
purchased.
Get 1 extra year JBC warranty by registering here:
https://www.jbctools.com/productregistration/
within 30 days of purchase.
40 mm
50 mm
60 mm
80 mm
100 mm
130 mm 130 mm
para manuales - color gris
200 mm
300 mm
0027533-0521
Specifications
Auto-Feed Iron
Replacement
Ref.: 0027332
- Net Weight: 202 gr / 0.45 lb
- Dimensions: 35 x 21 x 182 mm / 1.42 x 0.83 x 7.16 in
- Solder Wire Diameter: Ø 0,5 - 1,5 mm / 0.02 - 0.059 in
- Package Dimensions/Weight: 300 x 125 x 65 mm / 400 g
(L x W x H) 11.81 x 4.91 x 2.56 in / 0.88 lb
Complies with CE standards.
ESD protected.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere jbc Elektrowerkzeuge Handbücher
jbc
jbc T210 Series Bedienungsanleitung
jbc
jbc JT Series Bedienungsanleitung
jbc
jbc MV-A Bedienungsanleitung
jbc
jbc B-iRON 210 Bedienungsanleitung
jbc
jbc ALE250 Bedienungsanleitung
jbc
jbc SF280-A Bedienungsanleitung
jbc
jbc WS140 Bedienungsanleitung
jbc
jbc advanced Series Bedienungsanleitung
jbc
jbc CS-F Series Bedienungsanleitung
jbc
jbc ALE250 Bedienungsanleitung
jbc
jbc T210 Series Bedienungsanleitung
jbc
jbc JTSE-A Bedienungsanleitung
jbc
jbc AP250 Bedienungsanleitung
jbc
jbc TE Bedienungsanleitung
jbc
jbc AL250-B Bedienungsanleitung
jbc
jbc AP250-A Bedienungsanleitung
jbc
jbc 55N PULSMATIC Bedienungsanleitung
jbc
jbc advanced Series Bedienungsanleitung
jbc
jbc T210 Series Bedienungsanleitung
jbc
jbc 14S Bedienungsanleitung
