Jbc CD-F Bedienungsanleitung

Blue Screen Soldering Stations

Model references: CD-F, CA-F, CP-F, CSV-F

Error num.

Displayed message

Solution

WARNING #1

Short circuit. Check the tool. Replace the

cartridge and/or the tool. If the problem

persists, contact the JBC Technical Service

via service@jbctools.com.

Replace the cartridge and/or the tool.

WARNING #2

Open circuit. Check the tool. Replace the

cartridge and/or the tool. If the problem

persists, contact the JBC Technical Service

via service@jbctools.com.

WARNING #3

Not accepted tool. Replace the tool. Make

sure it is compatible with the station. If the

problem persists, contact the JBC Technical

Service via service@jbctools.com.

Replace the tool.

Make sure it is compatible with the station.

WARNING #10

Current use is overloading the unit.

Continued use will cause the system to stop.

Unit is overheated

Switch off and wait to cool down before new operation.

Consider working with a more powerful equipment as HDE Heavy Duty station.

STOP #10

Station overheated. Switch off and wait until

it has cooled down before a new operation.

Consider to use HDE Station if this warning

appears frequently

STOP #11

Transformer temperature sensor error.

Restart the station. If the problem persists,

contact the JBC Technical Service via

service@jbctools.com.

Restart the station.

STOP #12

Memory error. Restart the station. If the

problem persists, contact the JBC Technical

Service via service@jbctools.com.

STOP #13

Mains frequency error. Reset the station

after connecting the proper power supply. If

the problem persists, contact the JBC

Technical Service via service@jbctools.com.

Make sure the station is connected to a 50/60 Hz power source without

interference and restart the station.

WARNING #16

Earthing fuse is blown. Replace the

damaged fuse by a new one. You can press

"OK" to continue working, but be aware that

tip to ground resistance would not meet the

specifications in that case.

Replace the blown earth fuse for a new one.

If problem not solved, contact us:

www.jbctools.com

0024484 - 0522

Model references: CD, CF, CA, CP, CS, CV, DM, DD, DDR, NA, HD, HDR, DI, WS

Error num.

Displayed message

Solution

WARNING #1

Port X/Y

Shortcircuit. Check the tool.

Replace the cartridge and/or the tool.

WARNING #2

Port X/Y

Open circuit. Check the tool.

WARNING #3

No accepted tool.

Replace the tool.

Make sure it is compatible with the station.

WARNING #4

Port X/Y

Tool detection error. Check the tool.

in HD station

STOP #6

Port X/Y

Due to overload wait for unit to cool.

Unit is overheated.

Switch off and wait to cool down before new operation.

in other

stations

STOP #6

Port X/Y

Due to overload wait for unit to cool, JBC

recommends HD station to get more power.

Unit is overheated.

Switch off and wait to cool down before new operation.

JBC recommends to use HD station for these high power requirements.

in HD station

WARNING #7

Port 1/1

Shortcircuit. Check the tool.

Reset station and try new cartridge or tool.

Make sure they are compatible with the HD station.

in HD station

WARNING #10

Current use overloading unit. Continued use

will cause system to stop.

Unit is overheated

Switch off and wait to cool down before new operation.

STOP #10

Due to overload wait for unit to cool.

in other

stations

WARNING #10

Current use overloading unit. Continued use

will cause system to stop.

Unit is overheated

Switch off and wait to cool down before new operation.

Consider working with a more powerful equipment as HDE Heavy Duty station.

STOP #10

Due to overload wait for unit to cool, JBC

recommends HD station to get more power.

STOP #11

Error sensor temperature transformer.

Contact with the technical service.

Restart the station.

STOP #12

Memory error. Contact with the technical

service.

STOP #13

Mains frequency error. Contact with the

technical service.

Make sure the station is connected to a 50/60 Hz power source without

interference and restart the station.

If problem not solved, contact us:

www.jbctools.com

0024484 - 0522

Dieses Handbuch passt für folgende Modelle

Andere jbc Lötpistole Handbücher

Beliebte Lötpistole Handbücher anderer Marken

Bakon

Bakon 3200 Bedienungsanleitung

Proxxon

Proxxon Gaslotset MGS Bedienungsanleitung

HAKO

HAKO FX-8804 Bedienungsanleitung

SATA

SATA 02002A Bedienungsanleitung

Velleman

Velleman HRJA151 Bedienungsanleitung

Weller

Weller WSM 1 Bedienungsanleitung

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Montageanleitung

ersa

ersa i-CON 1V Bedienungsanleitung

Hakko Electronics

Hakko Electronics FX-100 Bedienungsanleitung

Weller

Weller WAD 101 Bedienungsanleitung

Weller

Weller WXD 2 Bedienungsanleitung

AlienTek

AlienTek T100 Bedienungsanleitung

Atten

Atten ATETOOL AT-689A Bedienungsanleitung

Surtek

Surtek 112554 Abmessungen und Installationsanleitung

Parkside

Parkside PLBS 30 A1 Bedienungsanleitung

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Bedienungsanleitung

Weller

Weller WX1 Bedienungsanleitung

multicomp pro

multicomp pro MP740893 Bedienungsanleitung

jbc CD-F Bedienungsanleitung

Beliebte Lötpistole Handbücher anderer Marken