Jbc CD-BD Bedienungsanleitung

English

www.jbctools.com

Soldering Station

Ref. CD-BD

Power Cord Manual

Packing List

The following items should be included:

CD Control Unit

Ref. CD-1D (120V)

CD-2D (230V)

CD-9D (100V)

Brass Wool

Ref. CL6210

Cartridges

Ref. C245903

C245741

CD Control Unit ........................................ 1 unit

Handpiece ................................................... 1 unit

Cartridges ................................................. 2 units

Brass wool .................................................. 1 unit

Sponge ......................................................... 1 unit

Power Cord ................................................. 1 unit

Soldering Station

Ref. CD-BD

ww w. jbc to ol s.c om

Handpiece

Ref. T245-A

Sponge

Ref. S0354

www.jbctools.com

Power Cord Socket

Main switch

Fuse

Cable collector

Quick Tip Changer

Tip Cleaning System

Process Control

Adjustable Stand:

Intelligent Heat

Management

Equipotential connection

USB-B connector

Features

CD Control Unit

Ref. CD-1D (120V)

CD-2D (230V)

CD-9D (100V)

Handpiece

Ref. T245-A

Adjustable stand

Cable collector

Adjust the tool stand to suit your work position.

Place the cable on the collector and adjust its position to avoid tangles.

www.jbctools.com

Tip Cleaning System

Tapping:

Tap gently to remove the excess of

solder.

Sponge

Ref. S0354

The least harmful cleaning method. Keep the sponge

damp with distilled water when working to avoid tip

wear.

Brass Wool

Ref. CL6210

Very effective cleaning method. Leaves a small layer

of solder on the tip preventing oxidation between

cleaning and rewetting.

Select the option that best suits your tip cleaning needs.

More options for the splashguard (not supplied):

Inox Wool

Ref. CL6205

Provides a superior

cleaning on the tip.

Metal Brush

Ref. CL6220

When used carefully,

it provides a more

thorough cleaning.

Splashguard

Tip Wipe

Wiping:

Use the slots to wipe off any

remaining particles.

Quick Tip Changer

ø 1

ø 1,5

ø 3,5

Round Chisel Round

bent

Bevel Special models

Compatible cartridges

The CD stations can use both the C245 and the C210 cartridges only with the appropriate handpiece:

T245/T470 or T210. Find the model that best suits your soldering needs in www.jbctools.com

Save time and change cartridges safely without switching the station off.

*Important: It is essential to insert the cartridges as far as the mark for a correct connection.

Alignment

1. Removing 2. Inserting 3. Fixing

Place the handpiece in the

extractor and remove the

cartridge.

Place the handpiece on top

of the new cartridge, press

it down slightly and remove

the handpiece from the

extractor.

Press the cartridge* to the

fixing holes according to

the following:

A. For straight C210.

B. For curved C210.

C. For C245.

www.jbctools.com

USB Connector

Download the latest softwares from our website to improve your soldering station.

JBC Updater

www.jbctools.com/software.html

Update the station software via USB connection:

JBC Manager

www.jbctools.com/manager.html

Manage and monitor stations connected to a Windows PC by using the JBC Manager:

USB-B Cable USB-A

USB-B

Cable

USB-A

Create graphs of the soldering

process in real time with power and

temperature data.

Export data

to another PC

Manager Settings

Change settings for a group of

JBC stations at the same time.

· Change temperature

(from 200 to 400ºC)

· Select temperature levels

· Fix one temperature

· Change Sleep temperature

· Set Sleep delay

(from 0 to 9 min or no Sleep)

· Change Hibernation delay

(from 0 to 35 min)

Operation

The JBC Exclusive Heating System

This revolutionary technology is able to recover the tip temperature extremely quickly.

This allows the user to work at a lower temperature.

As a result, the tip life increases x5 times.

1. Work

Lift tool from the stand and

the tool tip will heat up to the

selected temperature.

2. Sleep

When the tool is in the stand,

the temperature reduces to

180ºC / 360ºF (preset sleep

temperature).

Tool in the stand

Actual Temp. 180

Sleep

Tool in the stand after sleep

No heat

Actual Temp. 20

Hibernation

Selected temp.

350

Power 10%

350

After

30’

3. Hibernation

After longer periods of inactivity

(pre-set to 30 minutes), the

power is cut off and the tool

cools down to room temperature.

www.jbctools.com

Menu Screen

Main menu

Counters

Tool settings

4 Counters

Program version

Hibernation hours 0

No tool hours 0

6 Sleep cycles

Sleep temp 180

Hibernationdelay

0 min

Temp adjust + O

Tool 245

BackBack

Station settings

Back

Original PIN: 0105

The work screen provides

useful information of tool

status in real time.

Selected temp.

350

Power 10%

Fixed temp.

350

Displays a specific fixed temp.

Shown when you have

selected temp. levels.

Work Screen

Process Control

Fix one temp -----

Temp levels set OFF

Sleep delay 0 min

5 Beep ON

Change PIN

1 Temp unit

Celsius

Maximum temp 400

Minimum temp 200

Help text OFF

Levels ºC

270 350 400

Plugged hours 0

Working hours 0

Sleep hours 0

350

Exit

1 Reset settings

Station settings

Tool settings

Precision Handpiece

Ref. T210-A

For precision uses

C210 Cartridge range

For general uses

C245 Cartridge range

Precision Blue Grip Handpiece

Ref. T210-PA

This allows you to differentiate the handpiece used in soldering jobs with leaded alloys from

the lead-free soldering jobs.

Handpiece

Ref. T245-A

Blue Grip Handpiece

Ref. T245-PA

This allows you to differentiate the handpiece used in soldering jobs with leaded alloys from

the lead-free soldering jobs.

Soft Touch Handpiece

Ref. T245-B

Anti-slip and soft touch grip.

Compatible Handpieces

Andere Handbücher für CD-BD

Inhaltsverzeichnis

Beliebte Lötpistole Handbücher anderer Marken

Bakon

Bakon 3200 Bedienungsanleitung

Proxxon

Proxxon Gaslotset MGS Bedienungsanleitung

HAKO

HAKO FX-8804 Bedienungsanleitung

SATA

SATA 02002A Bedienungsanleitung

Velleman

Velleman HRJA151 Bedienungsanleitung

Weller

Weller WSM 1 Bedienungsanleitung

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Montageanleitung

ersa

ersa i-CON 1V Bedienungsanleitung

Hakko Electronics

Hakko Electronics FX-100 Bedienungsanleitung

Weller

Weller WAD 101 Bedienungsanleitung

Weller

Weller WXD 2 Bedienungsanleitung

AlienTek

AlienTek T100 Bedienungsanleitung

Atten

Atten ATETOOL AT-689A Bedienungsanleitung

Surtek

Surtek 112554 Abmessungen und Installationsanleitung

Parkside

Parkside PLBS 30 A1 Bedienungsanleitung

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Bedienungsanleitung

Weller

Weller WX1 Bedienungsanleitung

multicomp pro

multicomp pro MP740893 Bedienungsanleitung

jbc CD-BD Bedienungsanleitung

Beliebte Lötpistole Handbücher anderer Marken