Jbc NASE-B Bedienungsanleitung

Nano Rework station

Ref. NASE-B

www.jbctools.com

Steady Nano

Tweezers ........................ 1 unit

Ref. NP105-B

Manual .............. 1 unit

Ref. 0016767

Metal Brush ..... 1 unit

Ref. CL2466

Brass Wool ....... 1 unit

Ref. CL6210

Power Cable ..... 1 unit

Ref. 0009417 (

100/120V)

0009401 (230V)

Nano Rework station

Ref. NASE-B

Packing List

The following items should be included:

Control Unit ................... 1 unit

Ref. NAE-1B (120V)

NAE-2B (230V)

NAE-9B (100V)

Nano Handle ................. 1 unit

Ref. NT105-A

Cartridge

dispenser Case ............ 1

unit

R ef. 0 0115 6 8

Cartridges

included

Ref. C105-101 x1

C105-103 x1

C105-105 x2

C105-107 x1

C10 5 -112 x1

C10 5 -113 x 2

Allen key ........................ 1 unit

Ref. 009848

Tool Holder .................. 2 units

Ref. 0016606

www.jbctools.com

Nano Handle

Ref. NT105-A

Steady Nano

Tweezers

Ref. NP105-B

Features

Tool extension cord (1m)

Ref. A1205

Pedal

Ref. P-005

Accessories not included:

Puts the tool into

hibernation mode

Process

Screen:

2.8 Color TFT

Cartridge

extractor

and tip aligner

Brass wool

Metal brush

Stand:

Intelligent Heat

Management

Cable collector

Power socket

Main switch

Equipotential

connector Pedal connectors

USB-B

connector

RJ12

connector

for Robot

USB-A connector

www.jbctools.com

For Nano

Soldering Iron

Replace the tip cleaning system:

- Brass wool

- Inox wool

- Metal brush

For Nano

Tweezers

Tool Holder assembly Cable assembly

Changing the tip cleaning system

¥

ø 0,3

ø 0,6

0,3

2,5

2,4 x 0,6

Ø2,5

0,2 x 0,1

Round Chisel Bevel KnifeRound

bent

High thermal

performance

Stainless

steel chisel

Changing grips

Compatible cartridges

The NASE-B works with C105 cartridge range. Find the model

that best suits your soldering needs in www.jbctools.com

1. Push the grip with

the tabs onto the

handle.

2. To remove the tabs,

hold the grip and

pull them out.

Use a pliers if

necessary.

Nano handle

Grip for NT105-A

Changing cartridges

Save time and change cartridges safely without having to switch the station off.

Removing Inserting Aligning

Place the cartridge in the slot

as shown and pull the handle

to remove it.

Push the cartridge into the

handle to the mark*.

Use the holes to rotate

the cartridges for a proper

alignment.

*Important

It is essential to insert the

cartridges as far as the mark

for a proper connection.

Mark

www.jbctools.com

Tool in the stand

Actual Temp. 180ºC

Delay to hibernation: 29:30 Port

NT105

17:14

Sleep

17:14

Hibernation

Actual Temp. 25ºC

NT105

Port

350ºC

Port

Power

45%

17:14

Selected 350ºC

NT105

Operation

The JBC Exclusive Heating System

Our revolutionary technology is able to recover tip temperature extremely quickly. It means the user

can work at a lower temperature and improve the quality of soldering. The tip temperature is further

reduced thanks to the Sleep and Hibernation modes which increase the tip life by 5.

3. Hibernation

1. Work 2. Sleep

When the tool is lifted from the

holder the tip will heat up to

the selected temperature.

When the tool is in the holder,

the temperature falls to the

preset Sleep temperature.

After longer periods of

inactivity, the power is cut off

and the tool cools down to

room temperature.

Tools Menu:

· Set temperature limits

· Select temperature levels

Tools Menu:

· Set Sleep temperature

· Set Sleep delay

(from 0 to 9 min or no Sleep)

Tools Menu:

· Set Hibernation delay (from 0

to 60 min or no Hibernation)

Long time in

the holder

350ºC

Port

Power

45%

Temp. Levels

NT105

250 350 380

17:14

USB ﬂash drive is connected.

Station is controlled by a PC.

Station is controlled by a robot.

Station software update.

Press INFO to start the process.

Warning.

Press INFO for failure description.

Error. Press INFO for failure description,

the type of error and how to proceed.

System notifications (Status Bar)Menu Options

Station

Information

Power

indicator

Tool in use

Work Screen

Status bar

The NASE-B offers an intuitive user interface which provides quick access to station parameters.

Original PIN: 0105

Change port

Displayed if

temperature

levels are

activated

Station Tools Counters

ResetGraphicsPeripherals

Press INFO for each parameter description.

www.jbctools.com

Power (%)

Port 1 - NT105

450

400

350

300

250

150

100

200

Power Temp

17:14

By pressing Graphics in the main MENU, temperature and power ﬁgures in real time

are displayed for each port. This helps you decide which tip to use to obtain the best

quality solder joints.

Process analysis

Export graphics

Insert a USB ﬂash drive into the USB-A connector

to save your soldering process in csv format.

Graphics

Temperature

Power (%)

See other

port graphic

Soldering Net

Remotely manage and monitor as many stations as your PC can handle.

Functions:

- Set all the station parameters from your PC.

- Organize groups of stations and set all their parameters at the same time.

- Store specific configurations for later uses.

- Analyze the soldering graphics of the stations on your PC and export them.

1. Download the JBC Manager software and the user manual from www.jbctools.com/manager.html

2. Connect the stations via USB-B connector and the PC will automatically detect them.

3. The notification will be displayed on the station.

any JBC

station

USB Hub

JBC

Manager

Software

www.jbctools.com

RS-232

connection

1. Connect the tool to the station port.

2. Connect your Robot system to the Robot connector (RJ12) of the station.

DB9-RJ12 Adapater available only if necessary (Ref: 0013772).

3. Enable the Robot option in the station settings and the notification will be displayed:

4. Set your Robot’s commands according to the Robot Communication Protocol, available on the

website www.jbctools.com/jbcsoftware-menu-115.html.

Manage and monitor the station using a Robotic system.

Working with Robots

Robot Control Unit

Update the station software

1. Download the JBC Update File from

www.jbctools.com/software.html and save

it on a USB flash drive. Preferably one with no

other files.

2. Insert the USB ﬂash drive to the station.

The icon is diplayed while updating.

JBC

Update File

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere jbc Lötpistole Handbücher

Beliebte Lötpistole Handbücher anderer Marken

Bakon

Bakon 3200 Bedienungsanleitung

Proxxon

Proxxon Gaslotset MGS Bedienungsanleitung

HAKO

HAKO FX-8804 Bedienungsanleitung

SATA

SATA 02002A Bedienungsanleitung

Velleman

Velleman HRJA151 Bedienungsanleitung

Weller

Weller WSM 1 Bedienungsanleitung

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Montageanleitung

ersa

ersa i-CON 1V Bedienungsanleitung

Hakko Electronics

Hakko Electronics FX-100 Bedienungsanleitung

Weller

Weller WAD 101 Bedienungsanleitung

Weller

Weller WXD 2 Bedienungsanleitung

AlienTek

AlienTek T100 Bedienungsanleitung

Atten

Atten ATETOOL AT-689A Bedienungsanleitung

Surtek

Surtek 112554 Abmessungen und Installationsanleitung

Parkside

Parkside PLBS 30 A1 Bedienungsanleitung

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Bedienungsanleitung

Weller

Weller WX1 Bedienungsanleitung

multicomp pro

multicomp pro MP740893 Bedienungsanleitung

jbc NASE-B Bedienungsanleitung

Beliebte Lötpistole Handbücher anderer Marken