Jbc HDRE-9A Bedienungsanleitung

HDE-A Robot station

Ref. HDRE-A

English

www.jbctools.com

Packing List

The following items should be included:

HDE Control Unit ..............................................1 unit

Ref. HDE-1A (120V)

HDE-2A (230V)

HDE-9A (100V)

General purpose HD Handle

with 3m cable ........................................1 unit

Ref. T470-SA

HDE-A Robot station

Ref. HDRE-A

Power cord ......................1 unit

Ref. 0010569 (230V)

0013671 (100/120V)

Manual .............................. 1 unit

Ref. 0015305

ww w.j bc too ls.c om

Converter .........................1 unit

Ref. 0002747

www.jbctools.com

1. Connect the tool to the station port by means of the Converter.

2. Connect your Robot system to the Robot connector (RJ12) of the station.

DB9-RJ12 Adapater available only if necessary (Ref: 0013772).

3. Enable the Robot option in the station settings and the notification will be displayed:

4. Set your Robot’s commands according to the Robot Communication Protocol, available on the website

www.jbctools.com/jbcsoftware-menu-115.html.

Manage and monitor the station using a Robotic system.

Working with Robots

Control Unit

Ref. HDE-A

Robot Converter

Ref. 0002747

RS-232

connection

USB-A

connector

Tilt the display for

easy reading

2.8” Color TFT screen

with capacitive keyboard

Features

USB-B

connector

Equipotential

connection

Power Socket

T470: Handles for Heavy Duty

Use C470 Cartridge range

HD General Purposes

Ref. T470-A

HD General Purposes with 3m cable

Ref. T470-SA

HD Thermal Insulatior

Ref. T470-FA

HD Thermal Insulatior with 3m cable

Ref. T470-MA

Tri-lobed

Ref. T470-ZA

For better handling of the tool.

For intensive soldering jobs requiring continued high thermal power. They feature a non-slip-grip with

a good thermal insulation and a screw which ﬁxes the cartridge and prevents rotation.

Note: All models are supplied with a 1.5m cable except those speciﬁed with 3m.

Compatible Soldering Iron Handles

Foam

JBC offers a wide range of handles and grips to choose from.

www.jbctools.com

ø 1

ø 1,5

ø 3,5

Mark

Before changing the cartridge, be sure that the tip is cold.

Once the cartridge is properly inserted we recommend tightening the screw to prevent moving.

*Important: It is essential to insert the cartridges as far as the mark for a good connection.

Compatible Cartridges

The HDRE-A works with C470 cartridges and T470 Handles. Find the model that best suits your

soldering needs in www.jbctools.com

Round Chisel Round bent Bevel Special models

Changing and fixing the cartridges

MENU INFO

350ºC

Port

Power

45%

Temp. Levels

250 350 380

17:14

T470

USB ﬂash drive is connected.

Station is controlled by a PC.

Station is controlled by a robot.

Station software update.

Press INFO to start the process.

Warning.

Press INFO for failure description.

Error. Press INFO for failure description,

the type of error and how to proceed.

System notifications (Status Bar)Menu Options

Station

Information

Power

indicator

Tool

connected

Work Screen

Status Bar

The HDE-A offers an intuitive user interface which provides quick access to the station parameters.

Change

port

Displayed if

temperature

levels are

activated

Station Tools Counters

ResetGraphicsPeripherals

Press INFO for each parameter description.

Port 1 - T245

450

400

350

300

250

150

100

200

Power Temp

17:14

www.jbctools.com

By pressing Graphics in the main MENU, temperature and power responses in

real time are displayed for each port. This helps you decide which the proper tip is

for every soldering job and the quality of the solder joint.

Process analysis

Export graphics

Insert a USB ﬂash drive into the USB-A

connector to start saving your soldering

process in csv format.

Graphics

Temperature

Power (%)

See other

port graphic

Update the station software

1. Download the JBC Update File software from

www.jbctools.com/software.html and save it on

a USB flash drive. Preferably one with no other files.

JBC

Update File

2. Insert the USB ﬂash drive.

The icon is diplayed while updating.

Soldering Net

Remotely manage and monitor as many stations as your Windows PC can handle.

any JBC station

JBC

Manager

software

USB Hub

Functions:

- Set all the station parameters

from your PC.

- Organize groups of stations and

set all their parameters at the

same time.

- Store specific configurations for

later uses.

- Analyze the soldering graphics

of the stations on your PC and

export them.

1. Download the JBC Manager software and the user manual from www.jbctools.com/manager.html

2. Connect the stations via USB-B connector and the PC will automatically detect them.

3. The notification will be displayed on the station.

www.jbctools.com

Clean periodically

Maintenance

Before carrying out maintenance or storage, always allow the equipment to cool.

- Clean the station screen with a glass cleaner

or a damp cloth.

1. Pull off the fuse holder and remove the fuse.

If necessary use a tool to lever it off.

2. Press the new fuse into the fuse holder

and replace it in the station.

- Use a damp cloth to clean the casing and

the tool. Alcohol can only be used to clean

the metal parts.

- Periodically check that the metal parts of

the tool are clean so that the station can

detect the tool status.

Fuse holder

- Maintain tip surface clean and tinned prior

to storage in order to avoid tip oxidation.

Rusty and dirty surfaces reduce heat

transfer to the solder joint.

- Periodically check all cables and tubes.

- Replace a blown fuse as follows:

Fuse

- Replace any defective or damaged pieces. Use original JBC spare parts only.

- Repairs should only be performed by a JBC authorized technical service.

Safety

It is imperative to follow safety guidelines to prevent electric

shock, injury, fire or explosion.

- Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire.

- The power cord must be plugged into approved bases. Be sure that it is properly grounded

before use. When unplugging it, hold the plug, not the wire.

- Do not work on electrically live parts.

- The soldering tip and the metal part of the tool may still be hot even when the station is turned off.

Handle with care.

- Do not leave the appliance unattended when it is on.

- Do not cover the ventilation grills. Heat can cause inflamable products to ignite.

- Use a “non residue” classified flux and avoid contact with skin or eyes to prevent irritation.

- Be careful with the fumes produced when soldering.

- Keep your workplace clean and tidy. Wear appropriate protective glasses and gloves when

working to avoid personal harm.

- Utmost care must be taken with liquid tin waste which can cause burns.

- This appliance can be used by children over the age of eight and also persons with reduced

physical, sensory or mental capabilities or lack of experience provided that they have been given

adequate supervision or instruction concerning use of the appliance and understand the hazards

involved. Children must not play with the appliance.

- Maintenance must not be carried out by children unless supervised.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere jbc Lötpistole Handbücher

jbc

jbc SF Bedienungsanleitung

jbc

jbc LC-2BIA Bedienungsanleitung

jbc

jbc KHT470A Bedienungsanleitung

jbc

jbc AD 2940 Bedienungsanleitung

jbc

jbc PHS-B Series Bedienungsanleitung

jbc

jbc IN 2100 Bedienungsanleitung

jbc

jbc B-IRON 210 DUAL Bedienungsanleitung

jbc

jbc TRA245 Bedienungsanleitung

jbc

jbc Precision B-iRON Station Bedienungsanleitung

jbc

jbc DIT-D Bedienungsanleitung

jbc

jbc DI 2860 Bedienungsanleitung

jbc

jbc SL 2300 Bedienungsanleitung

jbc

jbc AD 4200 Bedienungsanleitung

jbc

jbc HDRE-B Bedienungsanleitung

jbc

jbc TESE-A Bedienungsanleitung

jbc

jbc Premium DIR-D series Bedienungsanleitung

jbc

jbc HA Series Bedienungsanleitung

jbc

jbc CDEB Series Bedienungsanleitung

jbc

jbc PA120-A Bedienungsanleitung

jbc

jbc CDE-1BQA Bedienungsanleitung

jbc

jbc BT-2BQA Bedienungsanleitung

jbc

jbc Pick & Place Bedienungsanleitung

jbc

jbc CD-2BHE Bedienungsanleitung

jbc

jbc WSST Bedienungsanleitung

Beliebte Lötpistole Handbücher anderer Marken

Bakon

Bakon 3200 Bedienungsanleitung

Proxxon

Proxxon Gaslotset MGS Bedienungsanleitung

HAKO

HAKO FX-8804 Bedienungsanleitung

SATA

SATA 02002A Bedienungsanleitung

Velleman

Velleman HRJA151 Bedienungsanleitung

Weller

Weller WSM 1 Bedienungsanleitung

Vishay Precision Group

Vishay Precision Group Micro-Measurements Mark V Montageanleitung

ersa

ersa i-CON 1V Bedienungsanleitung

Hakko Electronics

Hakko Electronics FX-100 Bedienungsanleitung

Weller

Weller WAD 101 Bedienungsanleitung

Weller

Weller WXD 2 Bedienungsanleitung

AlienTek

AlienTek T100 Bedienungsanleitung

Atten

Atten ATETOOL AT-689A Bedienungsanleitung

Surtek

Surtek 112554 Abmessungen und Installationsanleitung

Parkside

Parkside PLBS 30 A1 Bedienungsanleitung

BlackJack SolderWerks

BlackJack SolderWerks BK8000 Bedienungsanleitung

Weller

Weller WX1 Bedienungsanleitung

multicomp pro

multicomp pro MP740893 Bedienungsanleitung

jbc HDRE-9A Bedienungsanleitung

Beliebte Lötpistole Handbücher anderer Marken